Rundfunktechnik Electrical Engineers zum Anheuern

  • Rundfunktechnik
  • Elektrotechnik
Vorschläge:
mehr

Länder

Bestimmter Standort

Prüfungen

Stundensatz (USD)

Wertung

Online

Showing 195 results
  • Euroaccount anheuern

    Euroaccount

    Russian Federation $40 USD / hour
    Mechanical Engineer, Electrical Engineer
    Russian Federation
    7.2
    22 Bewertungen $40 USD pro Stunde
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using...
    I graduated from Moscow Technical University with Master degree. I have rich and strong experience in MECHANICAL - 3D modeling, 3D rendering, 3D design using AutoCAD and Solidworks - Finite Element Analysis and CFD using ANSYS and ABAQUS - Numerical Calculation and Simulation using Matlab - Dynamics Analysis using Adams, Nastran, Patran HARDWARE - Schematic Digital, Analog, Power electronics. - PCB layout, routing and assembly using Altium designer, Eagle CAD, Allegro, CADSTAR, PADS, Protel99.. - Product design and mechanical design in Solidworks. weniger
  • levstremetskyi80 anheuern

    levstremetskyi80

    China $35 USD / hour
    PCB/Firmware/Product3D/Manufacturing
    China
    6.9
    37 Bewertungen $35 USD pro Stunde
    ⭐⭐⭐⭐⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional...
    ⭐⭐⭐⭐⭐ As an electronic engineer, I have been working in PCB design/layout and firmware programming field for 8+ years. Here are some of the experiences that I worked ago. - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - Arm cores: ATSAM, STM32, PIC32, A13, FreeScale, MSP, NXP - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Once you hire me, expected me to help your business like I 'm growing it as my own. I would love to hear from you. weniger
  • songhku925 anheuern

    songhku925

    China $25 USD / hour
    Web Developer || Machine Learning Expert
    China
    3.5
    2 Bewertungen $25 USD pro Stunde
    I'm a Web Designer, Web Developer, and Machine Learning Expert. I am an honorary graduate of the University of Hong Kong, one of the world-class universities worldwide. I have degrees in Computer Science and Engineering. I received 5 years of education in Software Development and Machine Learning. 4+ years of time...
    I'm a Web Designer, Web Developer, and Machine Learning Expert. I am an honorary graduate of the University of Hong Kong, one of the world-class universities worldwide. I have degrees in Computer Science and Engineering. I received 5 years of education in Software Development and Machine Learning. 4+ years of time as a researcher and lecturer of the university has given me a substantial experience of mobile development as well as academic modeling and simulations. I have experience of 5+ years in Website Development. My major skills Front-End: ReactJS, Angular, WordPress, Bootstrap Back-End: NodeJS, Django, PHP, Ruby. Database: MySQL, MongoDB, Language: Python, C#, X code, Java My major services : - Web Design & Development - Machine Learning & Big Data (python, keras, opencv, pytorch, tensorflow) - AI ChatBot, Web scraping with python, Web Automation Bot, - circuit simulation and PCB design with arduino, proteus, PIC, CCS C, Mikro C -FEM simulation with ansys, comsol weniger
  • DreamCha anheuern

    DreamCha

    China $38 USD / hour
    Senior Electrical & Embedded System Engineer
    China
    6.1
    13 Bewertungen $38 USD pro Stunde
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With...
    Dear client By creating a cooperative and inspirational working culture, I motivate myself not only to write code and implement software, but also to find solutions to clients business problems. I always have the opportunity to challenge myself and grow and expand my horizons through international assignments. With 15 years industry experience, my expertise are as follows: - Circuit & Schematic & PCB design - Prototype & Mass production - Microcontroller programming using STM32WB/STM32, ESP32/ESP8266, nRF51/nRF52xxx, Arduino, BLE/Bluetooth, WiFi, Ethernet, Zig-bee, GSM/GPS/GPRS/GNSS, Z-Wave - Various LCDs & Sensors, I2C/I2S/SPI, RS232/485, Lora, NFC/RFID - Raspberry Pi using node.js, QT, etc. - various PLC & HMI programming such as Nextion, ADAM, Siemens, Delta, Mitsubishi - Various Servo/Motor control - Mobile app development - C/C++, C#,VB, Embedded C/C++ I will do my best to complete your proaject quickly, and I will provide the best service of high quality. Thank you. weniger
  • xiaoqideng anheuern

    xiaoqideng

    China $40 USD / hour
    Embedded System & IoT Designer & Linux & Developer
    China
    6.0
    19 Bewertungen $40 USD pro Stunde
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing...
    Dear client, Thank you for visiting my profile. As a high-skilled embedded system designer, developer and manager, I have full experience and rich knowledge in Embedded System Development. ========================= Skill Overview =============== 1) Rich Schematics and PCB designer - Over 10 years in designing using Altium Design Tool and Simulation Tools 2) Firmware Development - Rich experiences in C/C++/Embedded C - I like using various of MPU, ARM, PLD and embedded system equipment STM32 family, NRF51822/52832/nRF52840, CC2540/CC2541/CC26xx, ESP8266/ESP32, Silicon chips such as BGM113, PIC16F/18F/33F, Atmega family, 8051 family, Arduino, Atmel, - Experience with Keil, IAR, Atmel Studio, QT IDE, Arduino, Simplicity, CCS, Segger, - Rich experience in variant peripherals: UART, I2C, SPI, USB, Ethernet, Bluetooth, Wifi, Gyro/Accelometor, GPS, GSM/GPRS, xBee, Zigbee. I can adjust and work no matter what my client's timezone is. Thank you for your time! weniger
  • algoszones anheuern

    algoszones

    Pakistan $50 USD / hour
    ASP.Net | PHP | Ruby on Rails |MVC | Bootstrap
    Pakistan
    4.3
    4 Bewertungen $50 USD pro Stunde
    For me, *Customer Service* is not a department, it's an ATTITUDE. Be my guest and reach out to me by selecting the *Hire me* knob. Ciao! --------------------------------------------------------------------------------------------------------------
    For me, *Customer Service* is not a department, it's an ATTITUDE. Be my guest and reach out to me by selecting the *Hire me* knob. Ciao! -------------------------------------------------------------------------------------------------------------- weniger
  • dalong243020 anheuern

    dalong243020

    China $30 USD / hour
    Software(C++/Embedded System)& Electronic Engineer
    China
    5.8
    7 Bewertungen $30 USD pro Stunde
    I'm a qualified Software(C++ /Embedded System) and electronics engineer having rich 18 years+ experiences. Have worked with following peripherals & technologies: - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C#...
    I'm a qualified Software(C++ /Embedded System) and electronics engineer having rich 18 years+ experiences. Have worked with following peripherals & technologies: - Schematic and PCB Layout using Altium designer, Cadence, Eagle, and so on. - Multi Layer, Flexible, High speed PCB design - Exceptional C++/C /C# programming skills. - FPGA design using Verilog/VHDL (Xilinx ISE/XPS/SDK/Vivado, Altera Quartus, iCECube) - ARM, DSP, MCUs, Arduino experience. - MPU: Pic16F, Pic18F, Pic33F, Atmega8,16,128,32,8051,8951,8052,80251 - Single board computer: Raspbery pi, Beaglebone, NanoPi - Strong with UART, I2C, SPI, BLE,BT, GSM/GPRS/GPS, xBee, ZigBee. - Especially full experience for BLE HM10, HC05, ESP32, DA14580, nRF52832, 52840, BlueNRG, Developed numerous C libraries for using sensors and shields with STM32 ARM and have experience of creating a device from scratch, doing both firmware and PCB development (Autodesk Eagle CAD). Kind regards. weniger
  • ahmad5857 anheuern

    ahmad5857

    Pakistan $15 USD / hour
    Where Hardware meets Software !
    Pakistan
    6.0
    16 Bewertungen $15 USD pro Stunde
    We are Expert TEAM with exceptional skills and professional attitude. At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development. We analyze and produce complete Product Design and ensure reliability. Our area of expertise include. 1. Electrical...
    We are Expert TEAM with exceptional skills and professional attitude. At our Company, we do professional circuit designing, PCB designing, embedded systems development and Software Development. We analyze and produce complete Product Design and ensure reliability. Our area of expertise include. 1. Electrical & Electronics Engineering 2. Software Development 3. Product Design and Prototyping 4. Networks. 5. Programming in C, C++, Python. 6. Graphical Designing and Graphical Interfacing of Software. 7. Android Application Development. 8 Hardware and Software Integration. 9. Internet of Things Products. Node.js, JSON etc 10. Troubleshooting. We provide constant and full support to our clients for all kind of projects. In short, we are a place where hardware meets software. Regards, Ahmed Note: Some negative reviews are because some clients first pretend to develop one thing later end up pushing us to develop quite different thing. weniger
  • sonmezibrahim anheuern

    sonmezibrahim

    Turkey $15 USD / hour
    Data Scientist | Academic & content writer
    Turkey
    2.9
    2 Bewertungen $15 USD pro Stunde
    I am a full-time freelancer with more than a decade experience in data analysis. I have participated in many projects either as a coordinator or researcher. I have engaged in many activities and gained hands-on experience by working with international institutions. I am specialized in but not limited to: - data...
    I am a full-time freelancer with more than a decade experience in data analysis. I have participated in many projects either as a coordinator or researcher. I have engaged in many activities and gained hands-on experience by working with international institutions. I am specialized in but not limited to: - data analysis (entry, mining, extraction, visualization, modeling & management) - statistical, geospatial & classification analysis - MATLAB coding & its toolboxes use. - data quality control/quality assurance applications - product calibration & validation - research & project development - proof reading as well as academic, technical report and content writing I am well organized, keen to details and highly motivated professional with strong work ethic. I am an ambitious team player and a quick learner who performs the job without compromising on quality. For details (CV, projects, etc.) visit my web page at: https://ibrahimsonmez.wordpress.com/eng İbrahim SÖNMEZ, PhD weniger
  • mechatronicsengr anheuern

    mechatronicsengr

    Pakistan $25 USD / hour
    Embedded Systems Design and Development Engineer
    Pakistan
    5.8
    17 Bewertungen $25 USD pro Stunde
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory...
    I am Embedded System Design and Development Engineer. I have expertise in Microcontroller Programming and development on AVR (ATmega and ATtiny), Arduino and ARM (Cortex M0 and Cortex M4) in C/C++/Assembly Language. I have done - Control of DC motor, Display on LCD and input from Hexpad - RFID Based Factory Automation and Remote Inventory Management. - RFID Based Loyal Card for Loyal Customers. - Bluetooth Communication between MCU and RFID Host. - Vehicle Tracking using GPS and Accelerometer. and a lot more. I have expertise over all communication protocols of Microcontroller: - SPI (Master/Slave) - UART - USART - I2C (Master/Slave). - Ethernet - Wifi - Bluetooth etc.. I am expert in interfacing sensor modules with microcontroller. I believe in providing superb quality provided that the deadlines are met. Moreover, during the course of my project I would keep you updated regarding the status. Service Description: * Wireless Interfaces (ISM Band FSK, OOK, XBee, ZigBee, TI 2.4GHz, Bluetooth, WiFi, etc) * LED lighting control * DC Motor Control and Actuator Control Solutions * Touch Sense * RF Energy Detection Systems * Home Automation systems * Weather Stations (Temperature, Pressure, Humidity, Wind Speed, Positioning, and Ambient Light sensing) * GPS Tracking Systems * USB Based Embedded Products * Power Over Ethernet (POE) Solution * On Board / off board DC/DC Low quiescent current, Linear and Switch Mode Power Supply solutions for embedded applications ----------------------------------------------------- * PCB Design (Printed Circuit Board) * Schematics and Bill of Material * Block Diagram and Design Documentation * Suggesting you PCB and PCBA vendors or managing the PCB and PCBA process. * Part Selection, Parts Sourcing * Manufacturing File generation * High Speed, High Density Multi-Layer PCB Layout * Embedded Software / Firmware design development * 3D Step Models of the PCB for Integration with MCAD tools. * Board Bring-up: Test codes in C/C++. * DSP Design (Digital Signal Processing) * Power / Signal Integrity Analysis * System / Hardware Design -------------------------------- * Circuit Simulation Training using Altium, MultiSim and Proteus * Embedded Firmware Design Training (C/C++, Assembly) * Schematics and PCB Design training weniger

Hallo , hier sind einige offline Freelancer

Hallo , hier sind einige offline passende Freelancer ""