Digital Electronics Engineers zum Anheuern - Seite 3

  • Digital Electronics
  • Online Users
Vorschläge:
mehr

Länder

Bestimmter Standort

Prüfungen

Stundensatz (USD)

Wertung

Online

34 Ergebnisse angezeigt
  •     tshibsamuel477
 anheuern     tshibsamuel477
 anheuern

    tshibsamuel477 tshibsamuel477

    Tunisia $100 USD / Stunde
    PCB Designer & layout | Embedded Programming
    Tunisia
    0.0
    0 Bewertungen 0 Bewertungen $100 USD pro Stunde
    My name is Samuel and I am a mechanical engineer with a specialization in mechatronics, based in Tunisia with almost half a decade of experience. Throughout these years, I have worked on numerous projects that have allowed me to gain valuable experience. I am now offering my services to design and prototype your...
    My name is Samuel and I am a mechanical engineer with a specialization in mechatronics, based in Tunisia with almost half a decade of experience. Throughout these years, I have worked on numerous projects that have allowed me to gain valuable experience. I am now offering my services to design and prototype your electronic boards using Altium Designer. My PCB design area covers the following areas: -Single Sheet to Multi sheet Schematics -Single/double-sided and Multi-layer PCBs layouts -Typical data and control interfaces: UART, USB, SPI, I2C, SDIO, PCIe, etc. -Power Supply (SMPS & LDOs) -Digital video, audio, and other multimedia interfaces: HDMI, MIPI DSI/CSI, I2S, -TDM, -Reverse engineering weniger
  • tshibsamuel477 anheuern
  •     taosifiqbal
 anheuern     taosifiqbal
 anheuern

    taosifiqbal taosifiqbal

    Pakistan $15 USD / Stunde
    Power Supply Designer | Embedded Programmer
    Pakistan
    0.0
    0 Bewertungen 0 Bewertungen $15 USD pro Stunde
    Modeling and control Power converters, PCB design, Electronics, Embedded systems, Arduino, Fuzzy logic
    Modeling and control Power converters, PCB design, Electronics, Embedded systems, Arduino, Fuzzy logic weniger
  • taosifiqbal anheuern
  •     Sajid427628
 anheuern     Sajid427628
 anheuern

    Sajid427628 Sajid427628

    Pakistan $10 USD / Stunde
    Ass.E.E.Syed Hasnat Ali Shah
    Pakistan
    0.0
    0 Bewertungen 0 Bewertungen $10 USD pro Stunde
    ------> Professional E.E Developer<------ Home Automation, Industrial Automation, IOT System Design, Embedded System Design Mentor Graphics PADS Power PCB with Simulink and impedance simulation to calculated the microwave guidance, Altium included 365 ,Orcad Cadence Allegro 17x, Design Spark, Eagle 7.0 , Proteus...
    ------> Professional E.E Developer<------ Home Automation, Industrial Automation, IOT System Design, Embedded System Design Mentor Graphics PADS Power PCB with Simulink and impedance simulation to calculated the microwave guidance, Altium included 365 ,Orcad Cadence Allegro 17x, Design Spark, Eagle 7.0 , Proteus Simulation, Vision System Matlab PADS/Altium/Allegro/Xpedition/KiCAD/SDW Expertise in Technologies : ISA/RISC/PSoC/SoC/I2C/LINUX/SQL C./I2A/JTAG/S2C/MCLK/Fsync/ADC/DAC/AVR/PIC/ARM/x86-x64 Architecture/MCU/PIC/CPU/GPU/APU/ARM Based Processors and more hardware designing and development. That can be used in automation, signal processing, security, industry, home, offices and education purposes. Mentor Graphics Pads Power PCB Orcad/Allegero/Capture/PCB Viewer Altium Designer KiCAD Circuit Studio Autodesk Fusion Included Eagle Design Spark Proteus For Demonstration Of Simulation MCAD-ECAD Unification Component Library Management SPICE Simulation PCB Layout PCB Manufacturing (CAM) GERBER, BOM, CPL, Pick and Place, DXF, Assembly Drawing, Active BOM I can give you Fastest turnaround and quote availability through PCBWAY, JLCPCB, ALL PCB and Local Manufacturer in your country. ------> 3D Design<------ Device Enclosure Designing/3D of Parts Creator/DXF to 3D/ Stl to STP/ SLDprt to F3d Alibre-DesignArchi CAD-AutoCAD Electrical-3ds Max-Alias-Inventor-Maya-Revit-123D-BricsCAD-Bentley MicroStation-BlenderCAD-BobCAD-CAMCATIA-DraftSight-Delmia-FreeCAD-Femap-Fusion 360-Geomagic Design-IronCAD-JTKompas-3DKeyCreator-KeyShot-Lagoa Lightwave-Luxology-Mastercam-Moi3DNX-Unigraphics-OBJO-nshape-OpenSCAD-Parasolid-Powermill-Powershape-Pro/Engineer-WildfirePTC-Creo-ParametricPTC-Creo Elements-Rhino-SpaceClaim-SOLIDWORKS-solidThinking-EvolveSurf-CAMSolid-EdgeSolid-FaceSTEP / IGES-SketchUp-STL-TopSolid-TinkerCADT-Flex -CADTurbo-CADVector WorksViaCAD-3DVRML / WRLZW-3DOtherRendering-Zbrush-Houdini-Meshmixer-Ink scapes G-Coding. weniger
  • Sajid427628 anheuern
  •     edi45
 anheuern     edi45
 anheuern

    edi45 edi45

    Indonesia $30 USD / Stunde
    Electronic and Embedded System Engineer
    Indonesia
    0.0
    0 Bewertungen 0 Bewertungen $30 USD pro Stunde
    Professional Embedded System Engineer with 9 years of experience on hardware and embedded software development. PCB Tools : - Altium - KiCAD - Eagle - EasyEDA Microcontroller : - AVR - STM32 - ESP8266 / ESP32 - NXP - Texas Instrument - Arduino - Raspberry / Banana / Orange Pi SBC Wireless Communication - NFC (MF...
    Professional Embedded System Engineer with 9 years of experience on hardware and embedded software development. PCB Tools : - Altium - KiCAD - Eagle - EasyEDA Microcontroller : - AVR - STM32 - ESP8266 / ESP32 - NXP - Texas Instrument - Arduino - Raspberry / Banana / Orange Pi SBC Wireless Communication - NFC (MF classic, desfire, ultralight, NTAG424, NTAG213, NTAG21x, ICODE) implemented on payment, membership, access control with various NFC reader on desktop such as ACR122U, ACR120U, castle tech QP8000 to android custom reader - RFID short / long range - WiFi, Bluetooth, LoRa Wired Communication - UART, SPI, I2C, CAN, LIN, RS232, RS485 Protocol Data - MODBUS RTU / ASCII - HTTP, MQTT, TCP, UDP weniger
  • edi45 anheuern
  •     malik277
 anheuern     malik277
 anheuern

    malik277 malik277

    Pakistan $10 USD / Stunde
    Electrical/ Embedded/ MATLAB/ ARDUINO/ PCB Design
    Pakistan
    0.0
    0 Bewertungen 0 Bewertungen $10 USD pro Stunde
    I am a highly skilled Electrical and Embedded Systems Engineer with expertise in MATLAB, ARDUINO, and PCB Design. With a strong academic background and practical experience, I have successfully executed numerous projects in the field of electrical engineering and embedded systems. In the realm of Electrical...
    I am a highly skilled Electrical and Embedded Systems Engineer with expertise in MATLAB, ARDUINO, and PCB Design. With a strong academic background and practical experience, I have successfully executed numerous projects in the field of electrical engineering and embedded systems. In the realm of Electrical Engineering, I possess a deep understanding of circuit design, analysis, and implementation. As an Embedded Systems expert, I have a proven track record of developing firmware for various microcontrollers, including but not limited to ARDUINO. MATLAB is a powerful tool in my arsenal, and I leverage its capabilities to model, simulate, and analyze complex electrical systems. My proficiency in MATLAB extends to algorithm development, data analysis, and signal processing. PCB Design is another area where I excel, creating layouts that optimize performance, minimize interference, and adhere to industry standards. With a passion for innovation and a dedication to excellence, I am well-equipped to tackle challenging projects in the fields of Electrical Engineering, Embedded Systems, MATLAB, ARDUINO, and PCB Design. I look forward to contributing my skills and expertise to your project, ensuring its success and meeting your expectations. weniger
  • malik277 anheuern
  •     David10575
 anheuern     David10575
 anheuern

    David10575 David10575

    United States $70 USD / Stunde
    Electrical& Electronic Engineer|PCB Design
    United States
    0.0
    0 Bewertungen 0 Bewertungen $70 USD pro Stunde
    I am Senior Electrical and Electronic expert with over 7 years of good experience in handling Electronic systems and Power System analysis for Generation, Transmission, Distribution Utilities, Bulk power-consuming industries, Control systems, and Digital Logic Design(Controller Programming), industrial devices, IoT,...
    I am Senior Electrical and Electronic expert with over 7 years of good experience in handling Electronic systems and Power System analysis for Generation, Transmission, Distribution Utilities, Bulk power-consuming industries, Control systems, and Digital Logic Design(Controller Programming), industrial devices, IoT, and Machine learning. ☑Power System Services: Good enough experience in the modeling of Power Systems, Control systems Scheme, Communication Systems Diagrams, and Digital Logic Design solutions using different methods and simulation software such as ETAP(Electrical Transient Analysis Program), PowerWorld Simulator, DIgSILENT (Power Factory), DIALux, MATLAB, Labview, Draw.io, Verilogue/VHDL/FPGA programming, Arduino, STM32, Multisim, Microblaze, and Xilinx. ☑PCB Design Services: I have experience of about 7 years in Schematics Design, PCB design, BOM creation, Gerber (manufacturing) file, and programming. Completed successfully around 70+ projects using Kicad, Altium, ZenitPCB, Gerbv, Eagle PCB, and Circuit maker. ☑Motor Controlling ☑MEP Design Services: ☑Solar System Design: Furthermore, I provide the services of basic and detailed engineering projects based on ITB project specifications. Datasheets and plot plan. weniger
  • David10575 anheuern
  •     SabirLashari
 anheuern     SabirLashari
 anheuern

    SabirLashari SabirLashari

    Pakistan $50 USD / Stunde
    Top rated freelancer|Electrical & control engineer
    Pakistan
    0.0
    0 Bewertungen 0 Bewertungen $50 USD pro Stunde
    Clients 100% Satisfaction I am Professional Electrical Engineer having PhD in Electrical Engineering. I have almost 10 years of experience in these areas 1. Electrical engineering tasks 2. Control System Design 3. State Space Control 4. Linear Control System 5. Signal and system related tasks 6. Digital signal...
    Clients 100% Satisfaction I am Professional Electrical Engineer having PhD in Electrical Engineering. I have almost 10 years of experience in these areas 1. Electrical engineering tasks 2. Control System Design 3. State Space Control 4. Linear Control System 5. Signal and system related tasks 6. Digital signal processing tasks 7. Power system analysis tasks 8. Feedback control system tasks 9. Linear Circuit Analysis 10. Control system Engineering 11. Power Distribution Engineering 12. Power electronics 13. Matlab and Etap software 14. Microcontrollers 15. Arduino Projects 16. Engineering Labs work 17. Circuit analysis (DC and AC Analysis) 18. Converters and Inverter 19. Projects reports and presentations 20. Final year project Thesis 21. Hardware projects 22. Thermodynamics 23. Arduino projects and programming 24. Fuzzy logic controller design and simulation 25. PCB layout design 26. IOT and home automation projects 27. Finite element analysis 28. 2-D 3-D drawing and simulation 29. Power plant design 30. Physics, math, calculus, chemistry etc Software Projects: 1. MATLAB (great experience in this software) 2. Power word Simulator (PWS) 3. Power system Simulator (PSSE) 4. Etap 5. Verilog and Java 6. AutoCAD 7. Sci lab 8. Python 9. Tinker cad 10. Proteus 11. Pspice and LtSpice 12. Lab view 13. Multisim and Logisim weniger
  • SabirLashari anheuern
  •     venkatc3
 anheuern     venkatc3
 anheuern

    venkatc3 venkatc3

    India $30 USD / Stunde
    Embedded System Expert
    India
    0.0
    0 Bewertungen 0 Bewertungen $30 USD pro Stunde
    We're a dynamic group of experienced professionals dedicated to crafting cutting-edge electronic solutions. With a blend of creativity, technical prowess, and a deep understanding of market demands, we specialize in transforming ideas into market-ready products. Our multidisciplinary approach ensures seamless...
    We're a dynamic group of experienced professionals dedicated to crafting cutting-edge electronic solutions. With a blend of creativity, technical prowess, and a deep understanding of market demands, we specialize in transforming ideas into market-ready products. Our multidisciplinary approach ensures seamless integration of hardware and software, while our commitment to quality and excellence guarantees robust and reliable outcomes. Collaborate with us, and let's bring your vision to life in the ever-evolving landscape of electronic innovation. weniger
  • venkatc3 anheuern
  •     PCBdesigner23
 anheuern     PCBdesigner23
 anheuern

    PCBdesigner23 PCBdesigner23

    Pakistan $20 USD / Stunde
    PCB Designer/ARDUINO/MATLAB/ ELECTRONICS IOTs
    Pakistan
    0.0
    0 Bewertungen 0 Bewertungen $20 USD pro Stunde
    Are you in need of a skilled PCB designer to bring your electronic projects to life. Look no further! With 5+ years of experience in the field of electrical engineering and a proven track record of delivering high-quality PCB designs, I am here to help you realize your vision. As a seasoned professional, I specialize...
    Are you in need of a skilled PCB designer to bring your electronic projects to life. Look no further! With 5+ years of experience in the field of electrical engineering and a proven track record of delivering high-quality PCB designs, I am here to help you realize your vision. As a seasoned professional, I specialize in designing custom PCB layouts for a wide range of applications, including consumer electronics, industrial automation, medical devices, and IoT (Internet of Things) products. Whether you're developing a prototype or bringing a product to market, I have the expertise to create PCB designs that meet your exact specifications and performance requirements. My areas of expertise include: 1):Schematic capture and PCB layout design using industry-standard EDA (Electronic Design Automation) software such as Altium Designer, Eagle, and KiCad. 2):High-speed digital design, including signal integrity analysis, differential pairs routing, and impedance matching. 3):Analog and mixed-signal circuit design, including RF (Radio Frequency) and power electronics. 4):PCB assembly and manufacturing considerations, including DFM (Design for Manufacturing) and DFT (Design for Testability) guidelines. 5): Firmware development for embedded systems, microcontrollers, and FPGA (Field-Programmable Gate Array) devices. 6): Arduino/MATLAB/PLC & SCADA/LOGISIM/SIMULATION/labVIEW/CAD/CAM. I am committed to delivering top-notch PCB designs that are not only functional and reliable but also cost-effective and manufacturable. I am here to provide professional support and guidance every step of the way. Let's collaborate to turn your ideas into reality! Contact me today to discuss your project requirements and take the first step towards creating innovative electronic solutions that make an impact. Engr. Jarar weniger
  • PCBdesigner23 anheuern
  •     crashcoders
 anheuern     crashcoders
 anheuern

    crashcoders crashcoders

    Pakistan $10 USD / Stunde
    Mechanical Design, CAD/CAM, FEA, CFD
    Pakistan
    0.0
    0 Bewertungen 0 Bewertungen $10 USD pro Stunde
    Hi, I’m Usama Amjad, a Mechanical Design Engineer having experience in CAD Modeling and Simulation. Refund Guaranteed with Risk Free Purchase Experience. I’m Providing Following Services : *Excel, Word *MATLAB *CAD Modeler (SOLLIDWORKS, FUSION 360, ABAQUS, ARTCAM) *FEA (ABAQUS, ANSYS) *CFD(ANSYS) I have 4 years...
    Hi, I’m Usama Amjad, a Mechanical Design Engineer having experience in CAD Modeling and Simulation. Refund Guaranteed with Risk Free Purchase Experience. I’m Providing Following Services : *Excel, Word *MATLAB *CAD Modeler (SOLLIDWORKS, FUSION 360, ABAQUS, ARTCAM) *FEA (ABAQUS, ANSYS) *CFD(ANSYS) I have 4 years experience in Cad Modeler, Simulation, FEA, CFD, STRUCTURAL ANALYSIS. If you need any work related to my skills, just let me inform, I will do it. So, Feel free to contact me. We can discuss your project to make it better for you. Thank You! Regards, USAMA AMJAD. Hoping for a positive interaction Order Now! Thankyou! weniger
  • crashcoders anheuern

Hallo , hier sind einige offline Freelancer

Hallo , hier sind einige offline passende Freelancer ""