PLC & SCADA Programmers zum Anheuern

  • PLC & SCADA
  • Online Users
Vorschläge:
mehr

Länder

Bestimmter Standort

Prüfungen

Stundensatz (USD)

Wertung

Online

51 Ergebnisse angezeigt
  •     Contrologica
 anheuern     Contrologica
 anheuern

    Contrologica Contrologica

    Bulgaria $75 USD / Stunde
    PLC, HMI, SCADA, Drives & SQL Programmer
    Bulgaria
    5.4
    3 Bewertungen 3 Bewertungen $75 USD pro Stunde
    I specialize in the programming of machinery with programmable logic controllers, operator displays, data collection, databases, recipe management and motor control. If your system is new or existing, feel free to contact me for a free consultation on how you can create, develop, or improve your industrial process.
    I specialize in the programming of machinery with programmable logic controllers, operator displays, data collection, databases, recipe management and motor control. If your system is new or existing, feel free to contact me for a free consultation on how you can create, develop, or improve your industrial process. weniger
  • Contrologica anheuern
  •     youssefEngineer
 anheuern     youssefEngineer
 anheuern

    youssefEngineer youssefEngineer

    Morocco $30 USD / Stunde
    Embedded system Engineer
    Morocco
    5.4
    7 Bewertungen 7 Bewertungen $30 USD pro Stunde
    i'm youssef Al, I'm an embedded system engineer working in automotive industry as a software architect, I have higher skills in electronics, ucontrollers, automation, IA & Machine learning and software development using python. i'm here to work and satisfy my clients, happy to serve you
    i'm youssef Al, I'm an embedded system engineer working in automotive industry as a software architect, I have higher skills in electronics, ucontrollers, automation, IA & Machine learning and software development using python. i'm here to work and satisfy my clients, happy to serve you weniger
  • youssefEngineer anheuern
  •     macroenergy
 anheuern     macroenergy
 anheuern

    macroenergy macroenergy

    Turkey $25 USD / Stunde
    Electronics Engineer
    Turkey
    2.8
    1 Bewertung 1 Bewertung $25 USD pro Stunde
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux...
    DearSir, My background is related with: -Digital Motor Control -Analog Design -Electronic Design -PowerElectronics -Renewable energy -PCB design -Embedded system -Matlab -Simulation of hardware For each concept descriptions are as follows: Digital Motor Control: -3-phase induction motor vector control drive -Flux estimation algoritm generation -DSP(TMS320) implementation on motor drive -Low speed application -Torque and speed loop generation -Control algoritms -BLDC motor -Step motor -DC motor Analog design -Low power distribution -Noissless special opamp based analog circuits -Analog filters -Orcad simulation of several circuits Electronic Design -RF transmitter and receiver -Bluetooh reade rand transmitter -Magneticreader PowerElectronics -Implementation motor drive -AC/DC converter -DC-DC converter -Battery charger -Solar inverter -Renewable Energy -Uninterruptle power supplies PCB design -Schematic design by Altium -PCB design by Altium -Power board design -SMPS board design -Easyeda -CAD files of manufacturers Embedded system -ESP32,ESP8266,modules -Bluetooth and Wifi -PIC18,PIC24,PIC30 and dsPIC applications -Ardino -MSP430 -Atmel -DSP(Texas Instruments) -Renesas -STM32 -C2000 Matlab -Power Electronics simulation -Motor drive -WindEnergy -Solar Energy -Control applications Simulation of Hardware -Orcad Simulation (TI,National, LinearTech, Maximlibraries) -LTI -National -Matlab -Easyeda weniger
  • macroenergy anheuern
  •     ahmed4499
 anheuern     ahmed4499
 anheuern

    ahmed4499 ahmed4499

    Egypt $20 USD / Stunde
    Certified Labview Embedded developer & crypto Exp.
    Egypt
    2.5
    2 Bewertungen 2 Bewertungen $20 USD pro Stunde
    I am computer engineer with MSc degree in cryptography and i am certified Labview architect and Labview developer and Associate developer with big experience .. i can manage with NI hardware including crio , Pixi and sbrio and other vendor hardware controllers and PLC .. so i can help you manage your work with less...
    I am computer engineer with MSc degree in cryptography and i am certified Labview architect and Labview developer and Associate developer with big experience .. i can manage with NI hardware including crio , Pixi and sbrio and other vendor hardware controllers and PLC .. so i can help you manage your work with less prices , i do not care about money but i care about the quality of work , , i can design diagrams using UML , i can speak multi languages , ENGLISH , GERMAN AND ARABIC Thanks weniger
  • ahmed4499 anheuern
  •     cesur135
 anheuern     cesur135
 anheuern

    cesur135 cesur135

    Turkey $15 USD / Stunde
    electrical and electronics engineer
    Turkey
    4.1
    15 Bewertungen 15 Bewertungen $15 USD pro Stunde
    I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the...
    I have worked on several projects in my working life. Especially in the area of industrial Automation ,I have worked on the Wastewater Treatment Plant and Water Treatment Plant Automation Project. I wrote the system software with the SIEMENS TIA Portal program and the Simatic Manager program according to the automation scenario and then I worked with the SIEMENS WinCC SCADA program to monitor and control the system. I used the SIEMENS PH & INFORMATION SERVER program to report the units on a monthly, monthly and yearly basis and prepared templates for the reports. I did (PTP) point to point tests and automation tests when the units were switched on. I drew the Electricity Projects with the E plan P8 V2.6 program. In the field of process automation, I used the DELTA PLC program and the ABB PLC program to control each piece of equipment in the factory. In Energy Automation, I also worked in HES projects where I made the generators PLC and SCADA system. Ventilation systems of plants and enterprises were made according to the temperature of the environment, according to the working information of the machines and according to other factors. Ventilation system entered the circuit and worked in a certain place. I usually used ABB AC500 PLC program and ABB & SIEMENS drivers when doing these systems. I install &Comission Chocolate Machines,lines.And test all equipment then commission about process follow. I used Honeywell DCS C200 in iron steel industry and I comissioned this systems about part by part units In the field of electricity, I work actively in the fields of electric panel works, electricity projects and field applications of small enterprises in general. I used OMRON PLC some factory application with given scenario I wrote plc to control each equipment and depend on sensor etc.. I set up on the field instruments, configuration upper and lower limit values during setup, setup analogue 4.20 mA, 0-10 V. I made work such as parameter setting of ABB & SIEMENS drivers and softstarters. In Machine Automation ,I have done projects like machine process Automation and writing software depositor and other part of machines and there I used AB PLC –RS Logix 5000 and Factory talk. weniger
  • cesur135 anheuern
  •     liveexperts123
 anheuern     liveexperts123
 anheuern

    liveexperts123 liveexperts123

    Pakistan $50 USD / Stunde
    Engineers | Research Writers | Developers
    Pakistan
    4.6
    2 Bewertungen 2 Bewertungen $50 USD pro Stunde
    بِسْمِ اللهِ الرَّحْمٰنِ الرَّحِيْمِ LIVE EXPERTS ® A team of professional ENGINEERS and DEVELOPERS who work effortlessly to get 5 STARS in every project.. Live Experts - Transforming ideas into...
    بِسْمِ اللهِ الرَّحْمٰنِ الرَّحِيْمِ LIVE EXPERTS ® A team of professional ENGINEERS and DEVELOPERS who work effortlessly to get 5 STARS in every project.. Live Experts - Transforming ideas into reality **Academic Writing, Literature Review,Research Papers, Thesis, Dissertations and Proposals. **Computer Science(Machine Learning,Deep Learning,Artificial Intelligence,Algorithms, Linux, Bash, Docker, Asterisk ) **Engineering(Electrical,Mechanical,Civil,Chemical,Software,Petroleum,Structural) **Statistics/Data Analysis (SPSS/Minitab/Weka/R Programming) **Big Data Analysis(Classification and Prediction,Hadoop,Spark ) **Game/Web development(3D,AR,VR,Unity 3D,IOS/Android Apps) **Software Development** **Matlab and Mathematica Python, Java, C/C++,C#, Arduino,Raspberry pi, Cloud Computing,3ds Max, Autocad,Solidworks,Revit Cisco,Simulink, Verilog/VHDL, Ansys, CAD,CAM,Abaqus, Arena,PCB, Hardware, EAGLE, Linux,Unix, Socket,Aspen,Hysys, TensorFlow,Keras,OpenCv,OpenGl,PLC weniger
  • liveexperts123 anheuern
  •     abatsis
 anheuern     abatsis
 anheuern

    abatsis abatsis

    Greece $50 USD / Stunde
    Data Analyst | SQL | Excel | Access | VBA | Macros
    Greece
    0.0
    0 Bewertungen 0 Bewertungen $50 USD pro Stunde
    I have more than 30 years of experience in Data Modeling and Analysis, specializing in the Industrial Production sector. I work with MS SQL, MySQL, SAP, Excel, Access, Python, Power BI. Since 1990, I have completed many projects in Production Control, Production Data Acquisition (machine data acquired from PLCs,...
    I have more than 30 years of experience in Data Modeling and Analysis, specializing in the Industrial Production sector. I work with MS SQL, MySQL, SAP, Excel, Access, Python, Power BI. Since 1990, I have completed many projects in Production Control, Production Data Acquisition (machine data acquired from PLCs, scales, etc.). I also program with T/SQL through stored procedures and table triggers. I have also created many projects in MS Excel and MS Access. I guarantee 100% quality execution of your project. I can work 20/30 hours/week. weniger
  • abatsis anheuern
  •     xpozec9
 anheuern     xpozec9
 anheuern

    xpozec9 xpozec9

    Serbia $25 USD / Stunde
    MCU * PCB * PLC*Machine Learning
    Serbia
    0.0
    0 Bewertungen 0 Bewertungen $25 USD pro Stunde
    I am a freelancer with a lot of PCB design experience. Design tools are Altium, Eagle, and Kicad. I have over 15+ years of design experience, microcontroller programming experience, manufacture and assembling experience. Could you give me a chance to work with you? I hope to work with you. You can find out through my...
    I am a freelancer with a lot of PCB design experience. Design tools are Altium, Eagle, and Kicad. I have over 15+ years of design experience, microcontroller programming experience, manufacture and assembling experience. Could you give me a chance to work with you? I hope to work with you. You can find out through my portfolio. weniger
  • xpozec9 anheuern
  •     khanicha
 anheuern     khanicha
 anheuern

    khanicha khanicha

    Indonesia $35 USD / Stunde
    Small Office Home Office Automation Specialist
    Indonesia
    0.0
    0 Bewertungen 0 Bewertungen $35 USD pro Stunde
    Small Office Home Office Automation Specialist Located @ South East Asia. It is a groups of programmers which various skillsets
    Small Office Home Office Automation Specialist Located @ South East Asia. It is a groups of programmers which various skillsets weniger
  • khanicha anheuern
  •     cmharichandan
 anheuern     cmharichandan
 anheuern

    cmharichandan cmharichandan

    India $10 USD / Stunde
    electronics engineer
    India
    0.0
    0 Bewertungen 0 Bewertungen $10 USD pro Stunde
    I have worked in plc, IoT, designing field. So I am interested in these fields. In plc, I have used siemens controllers. in IoT, I have done some mini-private projects. In designing, I have used fusion 360 software for designing.
    I have worked in plc, IoT, designing field. So I am interested in these fields. In plc, I have used siemens controllers. in IoT, I have done some mini-private projects. In designing, I have used fusion 360 software for designing. weniger
  • cmharichandan anheuern

Hallo , hier sind einige offline Freelancer

Hallo , hier sind einige offline passende Freelancer ""