Filter

Meine letzten Suchanfragen
Filtern nach:
Budget
bis
bis
bis
Typ
Fähigkeiten
Sprachen
    Jobstatus
    1,885 analysis axle ansys Gefundene Jobs, Preise in EUR
    €105 Gebot i.D.
    14 Angebote

    I would like an ANSYS expert to help me with modelling the boundary layer (BL) which develops over a flat plate for three different flow regimes: i) Laminar, ii) not fully developed turbulent flow (transitional) and iii) fully developed turbulent flow. I will be providing Instructions for the whole process however the freelancer should be fully experienced

    €190 (Avg Bid)
    €190 Gebot i.D.
    31 Angebote

    ...with an engineering study, specifically in the area of design analysis. I have an urgent project that needs an analysis on particular design and I need you to create a report for me using Solidworks. I just need an animation, images, study results, design criteria, and detailed analysis reports. Moreover, the study is quite simple, but time is not

    €68 (Avg Bid)
    €68 Gebot i.D.
    18 Angebote

    We will send you the FEA composite model of a pivoting lever done with ANSYS. You will confirm the model is set up properly and results are reliable for deflection and safe working loads. The WPBZ file is 650,000kb

    €389 (Avg Bid)
    €389 Gebot i.D.
    35 Angebote

    Ansys modelling and analysis

    €26 / hr (Avg Bid)
    €26 / hr Gebot i.D.
    1 Angebote
    €15 Gebot i.D.
    1 Angebote

    We need you to write research content on different Mechanical engineering subjects. Fluid Dynamics Static & Dynamics Ansys Fortran Gas Turbine

    €29 (Avg Bid)
    €29 Gebot i.D.
    36 Angebote

    ...like to have your assistance on the simulation two cases attached the details for the cases introduction. The mesh file has to be compatible with OepnFOAM and created using ANSYS fluent or Gmesh for validation . Upon completion I will require a .msh file step by step tutorial explain the design procedures. If any interest to you, please send me a proposition

    €113 (Avg Bid)
    €113 Gebot i.D.
    15 Angebote

    We need FEM and CFD engineers. Should have good command on Meshing and analysis techniques.

    €45 (Avg Bid)
    €45 Gebot i.D.
    36 Angebote

    ...source in the PCB board around 50 degree [Zur Anzeige der URL Anmelden] modem of enclosure are place at the room temperature around 25 degree Celsius . i need help on doing the simulation using Ansys CFD to simulate on the enclosure with the heat source from the PCB and investigate the natural convection help to cool down the enclosure, and see also who the heat are reject

    €153 (Avg Bid)
    €153 Gebot i.D.
    27 Angebote

    the project is about simulation using ANSYS of a side pole crash impact on B-pillar ,with 3 different materials for B-pillar the changing of material will take place only in reinforcement layer. all the models, Mechanical properties and setup information are provided 3 thickness will be used for reinforcement layer for one of the materials. requirement

    €216 (Avg Bid)
    €216 Gebot i.D.
    7 Angebote

    I'm looking for someone who can do a written analysis on finite element analysis.

    €135 (Avg Bid)
    €135 Gebot i.D.
    54 Angebote

    Design 10 chosen Wheels - 11 x 6 mm that will fit a 0.0625 mm axle - Alloy Wheels and Rubber Tires for 164 die cast cars

    €159 (Avg Bid)
    €159 Gebot i.D.
    34 Angebote

    A Small ansys project I will share a pdf with details later

    €46 (Avg Bid)
    €46 Gebot i.D.
    27 Angebote

    Ölçüleri ve özellikleri belli iki metal plakanın kondaksiyon ile aralarında oluşan ısı transferi ve sıcaklık dağılımının simüle edilmesi ve analizi. Bir plaka soğuk (20-25C) diğeri ise prizmatik batarya yüzeyi(45-60) soğuk plaka içerisinde soğutma kanalları bulunurak bu kanallar sayesinde plakayı daha sonrada plaka batarya yüzeyini soğutmalıdır.

    €132 (Avg Bid)
    €132 Gebot i.D.
    14 Angebote

    ...equipment on it. I have done the FEA on Solidworks but I do not have the tools to tune the suspension systems that I designed. Suspension tuning cannot be done using SW and Ansys! It might need another software to tune suspension systems or use coded softwares like MatLab to do so, but I do not have the resources. Looking for someone who could do that

    €182 (Avg Bid)
    €182 Gebot i.D.
    16 Angebote

    We are planning to build an electric Scooter, So for the design section, we need a chassis, scooter designer. For analysis, we are looking for a person who is good at Ansys and other analysis software in market.

    €309 (Avg Bid)
    €309 Gebot i.D.
    10 Angebote

    Live and research project using software like Mimics innovation suite design software and Ansys analysis . When Dicom ( CT, MRI, CBCT) file is given, conversion from 2D to 3D images, design, mesh and analysis the model.

    €251 (Avg Bid)
    €251 Gebot i.D.
    14 Angebote

    Hi, I am looking for an expert in multi physics analysis in Ansys or Comsol. The problem involves the following physics electromagnetic + cfd + + fluid + structural + piezoelectric (FSI) The piezoelectric beam is immersed in a non newtonian rheological fluid (MR fluid). I want to check the vibration response of this beam in time domain and in frequency

    €98 (Avg Bid)
    €98 Gebot i.D.
    10 Angebote

    I wish to learn and use the Ansys computer simulation software for a short-term private project. However, I am not prepared to pay many thousands of USD for a licence of the software. I am looking for someone who can let me gain access to a free version of the software, eg. through a shared licence or cracked version.

    €107 (Avg Bid)
    €107 Gebot i.D.
    7 Angebote

    Dear freelancer, I need someone professional with Ansys 3d design

    €91 (Avg Bid)
    €91 Gebot i.D.
    10 Angebote

    We only need to do the report, 900 words Please let me know if you can do that Ansys part is already done This is only writing, analysis and interpretation of results it must have been including CFD,

    €18 (Avg Bid)
    €18 Gebot i.D.
    11 Angebote

    Hi there I want to design an Engine by using " Ansys " which is generate " power and Tourq " when apply inetial pressure (1-5) bar .

    €184 (Avg Bid)
    €184 Gebot i.D.
    11 Angebote

    ...engineering study, specifically in the area of design analysis. I have a project that needs an analysis on suspension design and I need you to create a report for me, no need to explain what it is, since I am an Engineer myself. I just need an animation, images, study results, design criteria, and detailed analysis reports. Moreover, the study is quite simple

    €149 (Avg Bid)
    €149 Gebot i.D.
    42 Angebote
    Trophy icon Promotional Video Beendet left

    ...stressful, time-consuming and uncomfortable. Not anymore, welcome to UBS, the premium bus service which can get you safer and quicker from/to Bangalore. Luxury sleeper / muti-axle coaches, free Wi-fi, USB charges, lip-smacking refreshments are some of the benefits of travelling with us. Starting with four services a day and stops well catered with walking

    €62 (Avg Bid)
    Garantiert
    €62
    6 Einträge
    Areodynamic ansys Beendet left

    i need transient Simulation with rotationg propellers

    €101 (Avg Bid)
    €101 Gebot i.D.
    22 Angebote

    ...same model in CSi Perform 3D software. I would like a civil or structural engineering background. Tasks: 1. Create a 3D model (in a finite element software like Perform3D, Ansys, SAP2000, etc) that match perfectly (or so) with matlab code. 2. If model results turn out different, go through the code to correct it. 3. Develope all other functions in

    €500 (Avg Bid)
    NDA
    €500 Gebot i.D.
    11 Angebote

    Hi , I have assignment soloving plane finite element 2d-3D I have sample of the answers, need someone familiar with Ansys workbench

    €40 (Avg Bid)
    €40 Gebot i.D.
    27 Angebote

    Please see the attached file. Deadline: 07.12.2018 Ansys related.

    €129 (Avg Bid)
    €129 Gebot i.D.
    6 Angebote

    Simulation of a turbocharger must be done in ansys software the geometry can be simplified the important point is the flow simulation itself. Garret GT15 turbocharger must be used in the design process and the data concerning it can be found on internet.

    €188 (Avg Bid)
    €188 Gebot i.D.
    18 Angebote

    I want to run ansys simulation of a gear assembly process provided in the attached video. I have attached necessary CAD files with all dimensions. To be more clear, first I want to simulate the process of the press head pressing onto the axle teeth with a 4500N vertical input force. Second to simulate the process of the press head pressing 0.65 inches

    €10 / hr (Avg Bid)
    €10 / hr Gebot i.D.
    7 Angebote

    A 3-wheels on a single horizontal axle with 4 swinging weights TOY drawing to be converted into a CAD drawing for 3D printing.

    €139 (Avg Bid)
    €139 Gebot i.D.
    87 Angebote

    I need you to develop some software for me. I would like this software to be developed.

    €124 (Avg Bid)
    €124 Gebot i.D.
    14 Angebote
    ansys simulation Beendet left

    battery simulation on ansys with air flow

    €46 (Avg Bid)
    €46 Gebot i.D.
    14 Angebote

    ...specifically in the area of design analysis. Due date is on Dec 6, 2018!! I have a project that needs an analysis on suspension design and I need you to create a report for me, no need to explain what it is, since I am an Engineer myself. I just need an animation, images, study results, design criteria, and detailed analysis reports. Moreover, the study

    €131 (Avg Bid)
    €131 Gebot i.D.
    50 Angebote

    ...of CFRP composites. Preferable Systems to use - Ansys / Altair Hypeworks / Solidworks / MatLab Some Approaches - Changing cross sectional area/ adding - removing fillets, etc. Steps - A) Structural analysis of previous design. B) Optimization process (Material assignment) ( Re-design). C) Analysis of new design + Comparison. D) Report. A picture

    €280 (Avg Bid)
    €280 Gebot i.D.
    17 Angebote

    I have PNG files of ultrasounds of a vein and need the geometry of the vein to be put into a file format that can be read by ANSYS Computational Fluid Dynamics solvers.

    €117 (Avg Bid)
    €117 Gebot i.D.
    15 Angebote

    I have been trying to simulate on Ansys-fluent two cars moving opposite to each other and between them a vertical wind turbine. I want someone to help me in this project as soon as possible, where I have several questions regarding this matter. I watched a lot of videos on YouTube, but, unfortunately, I didn't able to simulate this case. I did the model

    €92 (Avg Bid)
    €92 Gebot i.D.
    4 Angebote

    I need an expert in Finite Element Analysis and ANSYS Workbench.

    €13 / hr (Avg Bid)
    €13 / hr Gebot i.D.
    27 Angebote

    anyone who has skill simulation on Ansys Fluent and ansys Chemkin pro .

    €151 (Avg Bid)
    €151 Gebot i.D.
    12 Angebote
    Trophy icon solidwork and CFD 2 Beendet left

    solid model and CFD in Ansys, aerodynamic analysis

    €7 (Avg Bid)
    Garantiert
    €7
    8 Einträge

    Design a suspension system by using Ansys

    €94 (Avg Bid)
    €94 Gebot i.D.
    8 Angebote

    the article should build on using a wind turbine to elec...should build on using a wind turbine to electrolysis water to hydrogen gas then use the gas to generate power. the article should be with the result in the program (Matlab or Ansys ) vale (6-10 pages with originality 90% only plagiarism allow 10%) I want to publish this paper in Scopus journal

    €141 (Avg Bid)
    €141 Gebot i.D.
    9 Angebote

    Civil Engineer with the knowledge of FE Analysis with Seismic Engineering and also know programs; ANSYS, Linpro, and SMath studio portable.

    €151 (Avg Bid)
    €151 Gebot i.D.
    3 Angebote

    Need transient analysis of a component with complex geometry and file size of the model of 1GB. If you own a strong computer, this is a very easy task.

    €102 (Avg Bid)
    €102 Gebot i.D.
    12 Angebote

    ...conditions, meshed or not should be explained and mentioned. also i need the ANSYS files to be sent too for my supervisors to check and proof of work. the attachments are: 1- literature review, 2- guideline. Also i will be needing the actual parameters, module size and all the ANSYS details that you will be using to be available by next week to show my supervisor

    €178 (Avg Bid)
    €178 Gebot i.D.
    15 Angebote

    I have a project for you. Please find the attachment for more details. Please read the requirements file carefully.

    €38 (Avg Bid)
    €38 Gebot i.D.
    11 Angebote

    I would like for someone to draw the wind turbine with the dimensions I got into ANSYS and AutoCad, detailed.

    €126 (Avg Bid)
    €126 Gebot i.D.
    40 Angebote

    i have a beam element question that needs to be put on the ansys program to get the values and analysis.

    €25 (Avg Bid)
    €25 Gebot i.D.
    32 Angebote

    ...an aeronautical engineer to optimise the design. we can provide 3d file of what is done so far (concept work), so that you can focus on optimisation. Ability to perform CFD analysis is a must, possibility to use solidworks preferred, but not necessary. begin your bid with "vent" to make sure you've read this brief trough. Please bid ONLY if you are an

    €100 (Avg Bid)
    €100 Gebot i.D.
    1 Angebote