Cellphone firmware Jobs

...Daten sichern, und die RAIDs neu starten, oder, falls es nötig ist, das RAID neu aufsetzen und die alten HDD ersetzen. Danach müsste auch das Firmware update laufen One hard drive has apparently failed in a RAID 5. When I install a new hard drive, it does not synchronise. I would like to back up the data and restart the RAIDs or, if necessary, rebuild the RAID and replace the old HDD. The firmware update should then also run Location / Standort 63571 Gelnhausen, Germany Aktuelle Konfiguration   Firmware-Version: Appware-Version: Bootware-Version: NVSRAM-Version: N26X0-780890-001 Anstehende Konfiguration   Firmware-Version: Keine Appware-Version: Keine Bootware-Version: Keine NVSRAM-Version: Keine Übertragen auf: Keine Modelln...

..."as3911_interrupt.h" #include "iso14443a.h" #include "clock.h" #include "ic.h" #include "uart.h" #include "delay_wrapper.h" #include "sorex_hal/Communication/Rfid.h" #include "utils/debug.h" #include "utils/reschedule.h" #include "buzzer/sounds.h" #include "cardman/cards_manager.h" #include "application/application.h" #include "application/rtc_timeout.h" #include "application/software_functions.h" /*! brief Firmware Version string (will be written to UART while initializing) */ #define FIRMWARE_VERSION_STR "v3.3.1" /*! * brief Short timeout before initializing/calibrating the RFID unit * Has been introduced to get better calibr...

Wir entwickeln und bauen moderne Tintenstrahl-Drucksysteme (siehe ) und suchen für die weitere Entwicklung und Optimierung unserer patentierten eigenen Elektronik - gerne auch langfristig - einen Programmierer mit Kenntnissen in Rust und C. Unser System basiert auf Unix mit ARM Multi-Prozessoring. Sie sollten nach Möglichkeit in Deutschland, Österreich oder der Schweiz zu Hause oder umzugsbereit sein. Nach einer Kennenlernphase kann auch weitgehend im Homeoffice gearbeitet werden. Wir bieten ein gutes Miteinander, kurze Entscheidungswege, ein sehr geiles Produkt und eine gute Portion „Start-Up-Mentalität“. We develop and build modern inkjet printing systems (see ) and are looking for a programmer with knowledge in Rust and C for the further development ...

in einem RAID 5 und in einem RAID 1 ist offenbar je eine Festplatte ausgefallen, wenn ich eine neue Platte einbaue, synchronisiert es nicht. Ich würde gerne die Daten sichern, das RAID neu aufsetzen und die alten HDD ersetzen. Standort 63571 Gelnhausen Aktuelle Konfiguration   Firmware-Version: Appware-Version: Bootware-Version: NVSRAM-Version: N26X0-780890-001 Anstehende Konfiguration   Firmware-Version: Keine Appware-Version: Keine Bootware-Version: Keine NVSRAM-Version: Keine Übertragen auf: Keine Modellname: 2650 Platinen-ID: 2660 Untermodell-ID: 143 Produkt-ID:  MD32xxi           Revision:  0780 Ersatzteilnummer: A00 Teilenummer: 0770D8 Seriennummer:   0BL003S Lieferant: DELL  &nb...

Firmware-Entwicklung auf einem STM32 Cortex-M4 Prozessor (zB STM32F429). Es soll der bidirektionale Datentransfer von einer UART Schnittstelle auf Ethernet abgebildet werden (UART-Ethernet Bridge). Zudem sollen die Daten von 4 AD-Kanälen auf Ethernet UDP abgebildet werden. Erforderliche Kenntnisse: - STM32 Eco-System inklusive STM32CubeMX - Entwicklungsumgebung STM32CubeIDE - FreeRTOS - LWIP-Stack - UART, SPI, I2C auf STM32 - Speichern von Konfigurationsparametern im Flash - Firmwareupdate über UART Weitere Aufgabenfelder im Bereich der Mikrocontroller-Entwicklung in langfristiger Zusammenarbeit möglich

Für ein Analysegerät soll ein existierendes Display (Ansteuerung durch Firmware) durch ein neues Display ersetzt werden. Dieses soll mit Embedded Linux angesteuert werden. Zusätzlich sind Schnittstellen anzusteuern (WLAN, USB) . Es sind ca. 24 Display zu realisieren, Beispiele s. unten.

Für das Rollout unserer LTE-Router benötigen wir eine Software, die Konfigurationsdateien und Firmware-Upgrades automatisiert auf die Router überträgt und aktiviert. Über eine WEB-Oberfläche muss es möglich sein, den aktuellen Firmware-Stand der Router abzufragen und eine Rückmeldung über die erfolgreiche Übertragung zu erhalten.

Mit einem Bluetooth BGM 113 und einem RFID Chip verwalten wir Zutritte für Schlösser. Hierzu suchen wir einen langfristigen Partner möglichst in der Nähe vom Bodensee. DE/AT/CH. Die Firmware existiert bereits mit einigen Fehlern. Das Schloss wird sowohl mit Bluetooth als auch mit RFID Karten verwendet. App-Kenntnisse sind von Vorteil aber nicht zwingend. Job: - Überarbeiten der bisherigen Firmware - Hinzufügen von neuen Features Das Projekt läuft auf Stundenbasis.

...Pinfeld auf dem Display erscheinen. Egal welchen Pin man dort eintippt, soll sich das Handy nicht entsperren. Versucht man es dann aber ein zweites Mal, so ist es egal welche Zahlenkombination man eintippt, das Handy entsperrt sich. Das Handy selbst wird nicht mehr genutzt und soll nur für diese eine Funktion umprogrammiert werden. Evtl. schafft man dies ja bereits mit einer guten App und ohne die Firmware komplett umzuprogrammieren....

Hallo Reiner, wir suchen derzeit einen weiteren (remote) Kollegen im Bereich WiFi Router Firmware, LoRA-Sensor/Gateway Firmware, Cloud-WiFi. Ideal wäre C-Erfahrung und eine gewisse Passion für Router Firmware. Bei grundlegendem Interesse können wir gern einmal telefonieren. VG Steffen

Deutsch: Es geht um ein Projekt in eine embedded Firmware, wo verschiedene neue Protokolle im Bereich der Netzwerktechnologie umgesetzt und angepasst werden müssen. Weitere Details werden erläutert nach persönliche Kontaktaufnahme. Wir suchen einen Entwickler mit Erfahrung in Netzwerktechnologie. Programmiersprache ist C.

Bitte melde dich an oder Loge dich ein um Details zu sehen.

Ich habe das Problem dass nach langem Betrieb ein RAID1 Verbund auf meinem QNAP TS439R-UP mit aktueller 4.24 Firmware plötzlich "entladen" wurde. Ich möchte dies nach folgender Anleitung wiederherstellen und suche einen Linux Profi der im Umgang mit QNAP NAS sehr vertraut ist.

Unterstützung bei der Einführung von Embedded Linux auf Basis von Embedded Prozessormodulen (Phytec, MSC, QT …), voraussichtlich mit den Prozessoren Texas Instruments AM3352 oder NXP Unterstützung bei der Modulauswahl Inbetriebnahme der Entwicklungsumgebung Einführung in die GUI-Erstellung an konkreter Projektaufgabe Konfigurieren des Grundsystems Definition der Firmware-Update-Möglichkeiten LAN-Einbindung, USB-Einbindung (Speicherstick, externes Touchpanel, ggf. WLAN-Stick) Entwicklungsumgebung: Embedded Linux (Yocto oder . PTX-Dist). Hängt vom gewählten Modul ab Hochsprache : Ansi C Profil / Anforderungen: Gute Kenntnisse von Embedded LINUX Erfahrung mit obengenannten Prozessoren Kenntnisse in C und in der Entwic...

Wir suchen jemanden der unseren Support Chat konstant besetzt. Es geht um einen Onlineshop in China...einen Onlineshop in China der Smartphones, Tablets und Gadgets verkauft. Die Chat sollte konstant besetzt sein und hilft bei Fragen zu den Produkten, Zoll, Firmware, Versand und anderen Themen. Eine Einschulung mit den wichtigsten Themen und dem Umgang des Chats wird von uns durchgeführt. Uns ist wichtig, dass der Freelancer gut Deutsch sprechen und schreiben kann und ggf. Englisch in Sprache und Schrift beherrscht, da 10% der Kunden Englisch sprechen. 90% unserer Kunden sprechen Deutsch. Auch wäre ein Verständnis für technische Gadgets, Smartphones und Tablets von Vorteil, so das der Freelancer auch mit Begriffen wie Snapdragon, Firmware, Custom R...

...Systemkonzepten • Mitarbeit in agilem Entwicklungsprozess im Medizinbereich (ISO 62304) • Mitwirkung bei der Definition von Risikominderungsmaßnahmen • Mitwirkung bei Workshops • Umsetzung der UI nach Designvorgaben • Mitarbeit bei der Erstellung von Testspezifikationen • Definition und Programmierung von Unit Tests • Programmierung und Konfiguration embedded PC’s • Umsetzung Kommunikation zu Firmware (CAN, UART) Qualifikationen: • Abgeschlossenes Studium der Informatik oder vergleichbare Ausbildung mit entsprechender Berufserfahrung • Erfahrung in der Programmierung mit C# .NET 4.5 • Erfahrung mit Windows Presentation Foundation, Windows Workflow Foundation, Visual Studio Unit Testing Framework &bu...

Entwicklung eines abgesicherten tools fuer den Firmware-Update im Bereich von Blattmessung-System fuer WindKraftAnlage.

Die Firmware der IP Camera IC-3116W der Firma Edimax (SourceCode verfügbar auf der Hersteller-Seite: ) soll so angepasst werden, dass sich die Kamera nicht mehr mit der Cloud des Herstellers verbindet, sondern stattdessen mit einem von uns bereitgestellten Server kommuniziert.

Wir suchen für unsere F&E-Abteilung einen Firmwareentwickler, der uns bei der Umsetzung unserer alten Firmware auf eine neue Plattform unterstützt. Kenntnisse aus der Aerosoltechnik sind wünschenswert aber nicht zwingend. Elektrotechnische und Elektronikkentnisse notwendig. Programmiersprachen: - C / Cx - Assembler - LabView Dies ist als Projekt auf 6 Monate angelegt mit Option auf Verlängerung oder Festeinstieg!

Hallo, wir benötigen eine iOS / Android App mit einer simplen Suchfunktion und integrierter Datenbank. Das App muss auf alles iPhones (3G aufwärts) und iPads laufen. Desweiteren muss es auf jedem Android Gerät (Firmware 2.3 aufwärts) laufen. Die App Funktion ist schnell erklärt. Ein Textfeld (Ajax Live Suche) durchsucht eine lokale auf dem Gerät installierte sqlite Datenbank. Der Benutzer tippt also einen Begriff ein und bekommt seine Ergebnisse. Die Datenbank besteht lediglich aus 3 Feldern. ID, TITLE und TEXT. Die Live Suche benutzt dabei Title und Text um das gewünschte Ergebnis zu finden. Sofern es mehrere Treffer gibt, muss das Programm sortieren und zwar erst die Treffer im TITLE und danach die Treffer im TEXT. Sofern mögli...

Seeking an experienced firmware engineer to create the firmware on an STM STA8089FG GNSS chip to customize the data sent out via its UART interfaces. The task: - Obtain firmware source code and SDK from ST - Modify firmware to allow custom UART data output: UART0 - GNSS, UART2 - debug strings - Provide source codes so we can update debug messages if needed

...access to the internet. Requirements: Master's degree or PhD in Computer Science, Cybersecurity, or a related field Extensive experience in internet security, privacy, and VPN technologies Strong proficiency in server-side software development Familiarity with OpenWrt and router firmware development (preferred) Passion for internet security and privacy Responsibilities: Develop robust Wireguard exit nodes and VPN server software Ensure seamless integration with existing client software and VPN router firmware Implement secure authentication mechanisms for client connections Design scalable server architecture for hosting on rented solutions and in-house servers Create comprehensive documentation and instructions for server deployment and management Preferred Qualif...

I'm looking for a tech savvy freelancer to rectify a persistent issue I'm experiencing when trying to use my DualSense controller natively with the game, Brawlhalla. Despite having support for DualSense, Brawlhalla no longer responds appropriately to the controller. Notably, I've already made an attempt to update the DualSense controller firmware; unfortunately, the issue persists. Your objectives will be to: - Diagnose the problem's root cause - Develop and apply effective manuver to fix the issue - Test to ensure the problem is completely solved The right person for this job should possess the following qualifications: - Proven experience in troubleshooting and resolving tech-related issues on Steam and Windows. - Familiarity with DualSense controller and ...

For my project, real-time voltage levels tracked through an ATSAMD21 MCU will be crucial. I need someone who can develop firmware to transport this crucial A/D data to a host computer via USB in a raw format. This endeavour calls for: * Proficiency in crafting firmware for ATSAMD21 MCU * Proficient understanding of voltage/current monitoring systems including TI INA3211 i2c sensor * Ability to transport raw A/D data via USB * Experience in real-time data monitoring solutions. Your role would be to focus on developing a robust and efficient real-time monitoring system to track voltage levels and send this information in raw format to the host computer. Your expertise will ensure that accurate and reliable voltage info is readily available for further processing and analys...

I'm in need of an expert to design and develop firmware for real-time tracking in an indoor positioning system using UWB modules. Your expertise should include: - Firmware development for Qorvo Decawave UWB modules (DWM1001C) - Firmware development for nRF52832 - Understanding and implementation of Real-time tracking with multiple tags and anchors - Knowledge of indoor tracking systems I expect the resultant firmware to offer efficient and accurate real-time tracking. Please only put a bid if you have relevant experience and are confident in this area. Your portfolio of similar projects will be asked for review. As a reference; firmware needs to be designed to work with 20 tags and 20 anchors in the same zone. Tags will be communicating...

Bitte melde dich an oder Loge dich ein um Details zu sehen.

I'm in need of an experienced electronic embedded system developer to create a cutting-edge blood pressure monitor medical device. The project involves schematic, pcb, firmware development, as well as algorithm creation, testing and monitoring. Additionally, the device should be able to interact with an Android app for display and control purposes. Key features: - Bluetooth connectivity: The device should be able to connect to other devices wirelessly. - Real-time monitoring: The device should provide continuous data so that users can monitor their blood pressure in real-time. The Android app should include: control device and viewing data with scheduling. Regulatory Standards: - CE (Conformité Européenne): The device must adhere to European standards for healt...

Title: Expert Resume Editor Needed for Entry-Level Embedded Software/Firmware Engineer Position Project Description: I am in search of a seasoned resume editor with a technical background in embedded software and firmware engineering to refine and enhance my 1-2 page resume. This revision will specifically target entry-level positions in the embedded systems industry. The project will include: Content Editing: My resume requires expert tweaking to better align my educational background and internship experiences with the demands of entry-level embedded software/firmware engineering roles. Proficiency in technical language specific to embedded systems is essential to ensure the terminology and skills listed are relevant and up-to-date. Formatting & Layout Editin...

We need a missed call (cellphone) fwd to the voice Ai and the bot can answer questions, send caller texts messages while on phone and send links to products and services or forms to the callers phone via text, book call back times and setup appointments on the calendar and at the end send a text message to the owner of the cellphone with a complete transcript of the call. I think these pats the tools we need and i have acct for all of them i can give you access to. Make Go high level Lmk your thoughts

...Absolut main aspect is an accurate (in sense of stability, low noise and absolute value representation) K thermocouple element measurement. Two approaches are forseen - using the high precision MAX31856 as well as the AD8495 in conjunction with a 20-bit SAR and 24-bit SigDelt ADC. Apart from the ADC proposition the project comprisis of a full circuit and PCB creation. Additionaly also the needed firmware for the respective communication (over SPI) shall be properly implemented (well structured and with readable comments). Finally also testing should take please for measure the achievable performance of the proposed and implemented solutions. Please read carefully the attached project sheet with even more details. Looking forward to work together with an experienced engineer in...

...understanding of automation - Specific experience or good understanding of the "Go High Level" platform - Excellent project management skills to ensure a quick turnaround - Ability to work under pressure and meet tight deadlines We need a missed call (cellphone) fwd to the voice Ai and the bot can answer questions, send caller texts messages while on phone and send links to products and services or forms to the callers phone via text, book call back times and setup appointments on the calendar and at the end send a text message to the owner of the cellphone with a complete transcript of the call. I think these pats the tools we need and i have acct for all of them i can give you access to. Make Ghl If you're a web developer with a keen eye for det...

...between Arduino-Pymite and cc65 for Commodore 64. • Ability to exhaustively test and debug for optimal performance. As I have not started to work on this, it's essentially a from-scratch operation. Moreover, full compatibility between Arduino-Pymite and cc65 for Commodore 64 is a non-negotiable requirement. Fortunately, I will be providing all necessary resources, which include required tools, firmware, and hardware for testing purposes. It is critical that the freelancer have experience in porting projects and has prior demonstrated mastery of cc65 and Arduino systems....

I am in need of an expert firmware developer to work on an IoT project. The firmware will be developed for ESP8266. Ideal Skills and Experience: - Proficient in IoT firmware development - Experience with ESP8266 - Knowledge in C/C++ would be a plus The project will involve: - Collaborating in the design of the firmware for the IoT device - Writing efficient and reliable code to run on the ESP8266 - Testing to ensure the firmware works as intended - Offering support and addressing potential issues post-implementation. I'm open to any suggestions you might have regarding the programming languages to be used for this project. I need code to upload in nodemcu esp8266 1) Anyone can connect to internet through SSD and password. 2) it will connect to ...

As one of the leading Internet Service Providers (ISP), I am seeking a qualified PHP developer to create a customer-friendly web portal that interfaces with GenieACS API. The main functions of the web portal should be to monitor devices, manage firmware, and handle configuration management. The ideal freelancer for this task would have the following expertise: - Extensive knowledge and experience in PHP programming - Experience in working with APIs, particularly the GenieACS API - A deep understanding of device monitoring, firmware management, and configuration handling - Capability to design customer-centric user interfaces suitable for our ISP customers By the end of the project, the result should be a fully functional web portal that allows our customers to manage thei...

...developer to assist with the project. Key project requirements: - The drone will be based on ESP32 and will utilize brushed motors. - It should be designed for both indoor and outdoor environments. - The primary control mechanism will be through a smartphone. - The main functionality of the drone will be for photography and videography purposes. Your role will be to: - Develop the necessary firmware to control the ESP32 based drone. - Implement the smartphone control interface. - Ensure that the drone is designed to be stable and suitable for both indoor and outdoor flights. - Implement the necessary software to enable it to capture high-quality photos and videos. Ideal skills and experience for the job include: - Proficiency in ESP32 and brushed motor drone development. - Pr...

I'm in need of a skilled technician to update the firmware on my Checkpoint 1430 router. The requested firmware version is and due to the router being an End of Life (EOL) model purchased used, traditional download options are not available. The upgrade process will need to be executed offline. The key aim of this project is to: - Carry out the upgrade strictly offline - Ensure no loss of current functionality - Improve stability and fix any existing bugs if you could download and send me the file it would me great

...employing techniques to minimize noise and ensure compliance with regulatory standards. Signal Integrity: Ensuring signal integrity is maintained throughout the PCB layout design, especially in high-speed and high-power circuits, by minimizing impedance mismatches and signal distortion. Collaboration: Work closely with cross-functional teams including electrical engineers, mechanical engineers, and firmware/software developers to integrate PCB designs into the overall system architecture. Documentation: Create comprehensive documentation including PCB layout drawings, simulation results, Gerber files, assembly instructions, and design validation reports to support manufacturing and testing processes. Qualifications: Experience: Proven experience in PCB layout design and simulatio...

I hope you are good. I have read your description carefully and understand everything. I’m Electronics engineer who have 25 year experience on analog design, renewable energy, power electronics, motor control, microcontroller coding and PCB design. I have used Arduino, PIC, MSP430, C2000 and STM32 for 8 years. I have developed several codes by using their IDE and compilers. I know all principles of them. And I can do microcontroller simulation by using Proteus. Proteus have microcontroller model and peripheral components to simulate the code. The code can be debugged by using COF file also. Simulation result is same with real time application. I have 8 year experience on Arduino and know all principles of it. I’m using Atmega chip instead of Arduino board as a platform to hav...

...illustrate trends of specific variables related to the device's performance. - Show and manage (download) log files: The app should have the capability to display and manage log files stored on the device, with the ability to download them. - Show the value of specific parameters: The app should display real-time values of specific parameters of the device. - Write a C firmware sketch for a MCU (it has to be integrated into an existing firmware) Ideal candidates for this project will have: - Extensive experience in mobile app development, particularly on both iOS and Android platforms. - Proficient in Bluetooth device integration with mobile apps. - Strong UI/UX design skills to ensure a user-friendly interface. - Familiarity with data visualization tools for the tre...

I'm looking for an experienced firmware developper to build an STM32 for a board based on STM32G0 MCU, The firmware shall manage interruption between button and sensors, enter into bootloader mode on an interruption on the serial port (RS232), the firmware shall manage a state machine based on sensors input and go to sleep mode when no interruption occurs. More details will be shared later

I'm looking for an experienced ESP32 embedded developer with strong skills in firmware and web development. Your major tasks include: - Develop firmware for our ESP32 hardware - Create an interactive web interface for file management functionalities Ideal skills: - Profound experience in ESP32 firmware development - Robust web development expertise, specifically in building interfaces for file management - Strong communication skills and attention to detail By joining this project, you'll leverage your skills to improve our embedded system technology while creating a high-quality web interface for our users.

Debian 12 (Bookworm) now installs with non-free drivers included. Apparently there's a way to modify the installation so that it doesn't include non-free drivers, but I can't figure out how. I tried adding "firmware=never" in the installation's boot parameters (before --quiet), but that didn't work. If this is possible, I simply need someone to write instructions for me. Note that I'm installing from DVD. Please: this is for a Debian expert only (all the instructions I've found on forums haven't worked, so I don't want someone who's merely copying that stuff). Thanks!

Tenemos un marcha un proyecto, cuyo responsable dejo a medias el proyecto (primeras versiones de esquemáticos y prototipo) cuando procedíamos a empezar al desarrollo del firmware. Necesitamos retomar el proyecto, estudiar la viabilidad del trabajo realizado, re-diseñar o terminarlo y producir dos prototipos. Algunos aspectos importantes son: Sistema de comunicación LTE + Satelital (GlobalStar), uso eficiente de batería, sistema autónomo y plataforma flexible para su evolución.

...with experience with CM/LineageOS to building a custom-rom/firmware Project Details: - device is based on MT6580A - current firmware is only available as binary and working in 98% of cases - we need to improve it, but vendor does not exist anymore - I need to recreate from scratch the firmware with Google's Android sources and with mediatek drivers around it. We can share you a fresh Ubuntu 22.04 or any other Ubuntu version required on a system to run the code. It is required to have multiple years of experience with Android Firmware development and packaging for Android Watch If you have also experience in Android Watch / WearOS Firmware development, particularly with Android Wear OS, I would

I'm looking for an experienced firmware engineer to develop new firmware for nRF52 controllers. The main goal is to create an efficient firmware system that supports: - Low energy consumption - Wireless connectivity - Sensor data processing The chosen professional should have a solid background in firmware development and a good understanding of nRF52 controllers. Detailed experience in low energy consumption, wireless connectivity, and sensor data processing is also highly desirable. Only those with a proven track record in these areas are encouraged to bid. Having actual work experience with nRF52 controllers will significantly increase your chance of success in this project.

I'm seeking a proficient programmer to translate a short program (approx 1000 lines) written in assembler to C code for a PIC16. The task will require: - creating global variables and constants - creating functions based on the subroutines. - remove code that has a P876 compiler switch (the code will run on a PIC16F883 only). - create a simple flowchart of the program flow and... - ...replace goto statements with C type loops (for, while, do) and function calls. - adding comment blocks ahead of each function with some notes of what the code is doing. - check where the global variables are actually used and where possible change scope to a local variable. - create the main() function - add comments for anything that looks like a bug or incorrect. - compile code using Microchip XC8 c...

I'm in need of a seasoned software engineer experienced with firmware customization as well as product and motherboard design. The Successful Candidate Should: - Have expertise in user interface design. - Be capable of processing and analyzing data. - Have experience in integrating devices. Scope of Work: - You will be tasked with customizing existing software/firmware, with a focus on delivering specific end-user functionalities and enhancing overall utility. Motherboard/Product Design Considerations: - The design needs to accommodate specific connectivity options. - Incorporate a built-in display interface as a core feature. - Energy efficiency optimization should be considered in the design to ensure the final product is eco-friendly. Your bid will not be consi...

I am in the process of developing a basic Toy Drone with fundamental manoeuvrability capabilities and looking for someone who can do it .. 1. Flight Controller Firmware: - Autonomous flight mode: I want the drone to have the capability to fly autonomously. - Altitude hold: The drone should be able to maintain a specified altitude. 2. Remote Control Software: - Remote control: The remote needs to be intuitive and user-friendly with joystick controls. Softwares to be built in MatLab.

I am looking for an experienced electronics and firmware engineer to build a low-cost USB/COM port proxy hardware. This hardware will primarily be used for data transfer between one input port and two output ports, along with device programming and debugging, as well as providing remote access to the ports. Requirements: - The hardware should have three ports: one for input and two for output. - It should act as a proxy between the USB and COM ports, enabling data from one port to be sent to two devices. - It should be compatible with the RS232 protocol. - It should also work as a USB host and operate in a USB environment. Ideal Skills: - Electronics Engineering - Firmware Programming - Knowledge of USB/COM port architectures - Familiarity with RS232 protocol

I am in need of a skilled developer to create a seed key algorithm that can be used with Scania EMS S6, S7, and S8 models. Requirements: - The algorithm should be designed to work on all of the listed Scania EMS models. - The primary application of the seed key algorithm will be for security and access firmware data. - I am not looking for individual algorithms for each model, but rather a single, universal code that will be applicable to all three models. Ideal Skills: - Extensive experience in developing seed key algorithms - A strong understanding of Scania EMS S6, S7, and S8 models - Prior experience in developing security and immobilizer functions in automotive systems. If you are confident in your ability to complete this project successfully, please reach out. Your bid ...