Clamp Jobs

I require a minimalistic STL model of a C clamp specifically tailored for cnc machining. The desired dimensions are roughly 100mm x 80mm x 40mm. For this particular project, the following attributes are ideal: - Proficiency in 3D modeling for cnc machining - Understanding of C clamp designs - Ability to produce a basic model with minimal details Despite the simplicity of the model, an accurate representation to ensure practical utility when printed is paramount.

As a firearms enthusiast, I need a skilled mechanical engineer to help me develop a gun mounting clamp for my handgun flashlight. This particular mount should have the following features: - Quick release mechanism: The mount should allow for a quick and easy detachment of the flashlight when necessary. - Lightweight design: Since this will be for a handgun, a lightweight design is crucial for ease of use and maneuverability. Preferred material: I strongly prefer Polymer due to its durability and lightness. Previous experience designing firearm accessories and knowledge of precision engineering will be advantageous. Familiarity with firearms is a plus. It is important to create a reliable, user-friendly and safe to use design. So if you have the right skills and interest in mecha...

...an electromagnet supplied with alternating current, like in the linked video at the minute 1:08. I already replicated the experiment at home with the same electromagnet derived from a microwave’s transformer and supplying 220V at 50 Hz to it and I obtain the same effect (I was also able to measure the current flowing with a current clamp and it takes about 37.5 amperes). But in my project i want to try and enhance the repulsion effect. I know that this effect is based on Faraday’s law and on the induction equation “f.e.m.= magnetic flux/time” so you could make the aluminum part jump higher by giving the electromagnet more current (increasing the magnetic flux). But I would like to see if the formula works also in the other way:

...an electromagnet supplied with alternating current, like in the linked video at the minute 1:08. I already replicated the experiment at home with the same electromagnet derived from a microwave’s transformer and supplying 220V at 50 Hz to it and I obtain the same effect (I was also able to measure the current flowing with a current clamp and it takes about 37.5 amperes). But in my project i want to try and enhance the repulsion effect. I know that this effect is based on Faraday’s law and on the induction equation “f.e.m.= magnetic flux/time” so you could make the aluminum part jump higher by giving the electromagnet more current (increasing the magnetic flux). But I would like to see if the formula works also in the other way:

I need a CAD design of a clamping mechanism that is ergonomic and easy. It should not have too many steps to close, should look sleek and be adjustable to round or square bars of a balcony in order to hold a telescopic pole. It should be a mechanism which can be clamped on and off quickly but still be secure. I have added an example of a prototype i have created which can be explored. Please see how it is holding the pole for better understanding of what I need.

I'm in need of an industrial design for a small, 4x6 inch photo frame box clamp shell. The chosen material for this project will be wood and plastic, catering to the sleek and stripped-down visual I want for the box design. A minimalist style is ideal - favouring clean lines and simplicity over ornate and complex details. Skills & Experience: • Industrial Design • Wood or plastic • Experience in minimalist design Show measurements and dimensions Show all components and parts Shows explosion view Interest in or knowledge about eco-friendly production methods will be viewed as a plus, as I'm hoping the chosen designer can advise on how to maintain an environmentally conscious manufacturing process. I look forward to your ideas and quotes for this u...

...looking for a skilled mechanical engineer who can assist me in designing an accessory for the exterior of a vehicle. The accessory is a connector which will bridge the vehicle's roof to an L-Track on its side. Key project details include: - The design should be based on plastic materials. - The design should have an integrated L-Track connector on the bottom - The design should have a rounded tube clamp at the top - The design should have an integrated L-Track strip across 70% of the length of the accessory - The finished product should be capable of bearing a medium load, between 20-50 lbs. - Experience in automotive industry projects, specifically with outdoor accessories, would be highly advantageous. - The ability in leveraging CAD design software for drafts and 3D-mo...

As we expand our digital presence, we're looking for a skilled technical content writer who excels in creating comprehensive and engaging content for a wide range of instrumentation products including but not limited to Multimeters, Clamp Meters, Sound Level Meters, Anemometers, and Lux meters. **Key Responsibilities:** - Develop clear, concise product descriptions capturing key features and benefits. - Create user-friendly manuals that simplify complex technical information. - Produce comparison guides that highlight product differentiators. - Craft website content and catalog descriptions that enhance customer engagement and SEO. **Ideal Skills and Experience:** - Proficient in technical writing with a portfolio highlighting instrumentation products. - Strong understanding ...

As we expand our digital presence, we're looking for a skilled technical content writer who excels in creating comprehensive and engaging content for a wide range of instrumentation products including but not limited to Multimeters, Clamp Meters, Sound Level Meters, Anemometers, and Lux meters. **Key Responsibilities:** - Develop clear, concise product descriptions capturing key features and benefits. - Create user-friendly manuals that simplify complex technical information. - Produce comparison guides that highlight product differentiators. - Craft website content and catalog descriptions that enhance customer engagement and SEO. **Ideal Skills and Experience:** - Proficient in technical writing with a portfolio highlighting instrumentation products. - Strong understanding ...

We are making a gas stove market research .Provide some photos can get 30 $. 1. Do you have a Multi-head clamp gas stove? 2. Was it purchased within 3 years? If your answers are ‘yes ‘and you are interested, please contact me at any time. Thank you!

I am looking for a skilled 3D CAD designer to create a sheep handler clamp for restraining sheep during medical procedures. The ideal candidate should have experience in designing animal handling equipment and be familiar with AutoCAD software. Features and dimensions: - The clamp should be able to securely hold the sheep in place without causing any harm or discomfort. - It should be adjustable to accommodate sheep of different sizes and breeds. - The design should include a locking mechanism to ensure the sheep cannot escape. - The clamp should be made of durable materials that are easy to clean and maintain. Skills and experience required: - Proficiency in 3D CAD software, specifically AutoCAD. - Experience in designing animal handling equipment, preferably in the...

...Complex Animations The home page design for this project is straightforward without complex animations or advanced CSS, and consists of 8-9 sections. Extraction and Handling of Figma Design Files Independent extraction of images and SVG files from Figma, as well as the ability to work with unnamed figma layers. Accurate Setup of Styles and Fonts Implementation of styles and fonts (fluid with clamp) that precisely match the Figma files to achieve a pixel-perfect design. Workflow You get access to a dev site with a blueprint Ideal Candidate: Experience with Elementor Pro and Figma. Attention to detail Independent, with a proactive approach to work. If this initial task is successfully completed, you will be offered the opportunity to develop templates for additional pages such...

I need a Tube Clamp with hook to attach a clear window tarp to (see attached file for similar product), making it secure while driving but also removable. I also need washer plug inserts to run a bolt through a fiberglass roof. Part of the roof where the bolt attaches to is broken so I need a washer that tapered into a sunken plug insert so I can put a bolt through as to hold down the roof. Roll cage Tube Diameter is 1.5" (38mm) the hook will go into a 7/16" (11.11mm) eyelet hole like what's found on a tarp. The tapered plug needs to fit a 10mm bolt through. The measurements for the diameter of the hole (above the bolt head seen in picture) is 0.95" or 24mm. the depth of the whole insert should be no larger than 1" (25mm). **This is a small backyard projec...

Hi, I'm looking for an experienced 3d drawing designer who can create a precise 3d drawing of a clamp for me. The purpose of this clamp is to support objects in place, so accuracy is essential. The final design should be suitable for manufacturing and I would prefer it to be 2-5 inches in size, with a plastic material. That said, I'm open to ideas and suggestions for the design. My budget is flexible and will depend on the final type of design you produce. If you think you can meet my specifications, please let me know!

Bitte melde dich an oder Loge dich ein um Details zu sehen.

Bitte melde dich an oder Loge dich ein um Details zu sehen.

This is a quote for the modeling of the clam

I am looking for someone to assist me with a simple 3D printing project for protytping. I do not have a detailed design ready and will need assistance with the design process. The preferred material for the prototype is plastic. The product dimension is approx. 3' long, 1/2" wide and 1" high. It includes a few simple features such as a small brush head, with a hinge, and a "C" clamp or connector to snap/connect to a small diameter pole. I have approximate dimensions for the concept but will need to make adjustments as needed through the process. I am also open to input regarding different ways to accomplish during the design phase. Ideal skills and experience for this job include: - Proficiency in 3D modeling and design software - Knowledge of differen...

As we discussed on zoom, the task would be 3D model of clamp based on the photos, dimensions, or 3D scan ready for printing, Need to model, modify, and provide the STL model.

We need to design a plastic cover series to add to Medical product. From our drawing we need to apply this parts: Detail A: Plastic or Rubber cover to close the shock absorber area. Attention, the cover must be suitable to the movement of mechanism Detail B: Plastic cover for back part of electric actuator Detail C: Plastic cover for Clamp area Detail D and E: Plastic cover at the top of pipe to hide the mechanical parts of load cells at the top of the wheels Detail F: The electronic box can be moved on the frame according Aesthetic Design you propose and must be covered with a plastic cover Detail G: A socket plastic part for remote control that you can consider to place near the plastic cover of electronic box You must design all covers with same family fit idea and considerin...

I am looking for a skilled individual or team to design and develop a clamp earth resistance meter. This project requires expertise in electrical engineering and measurement accuracy. Requirements: - The earth resistance measurement must have a required accuracy of ±1%. - The preferred method for the meter to measure earth resistance is through the inductive method. - The maximum earth resistance value to be measured should fall within the range of 0-10 Ohms. Ideal Skills and Experience: - Strong background in electrical engineering and circuit design. - Experience in developing clamp earth resistance meters or similar instruments. - Proficiency in programming and firmware development for data acquisition and analysis. - Knowledge of inductive measurement methods and...

...divide-gray-500/10 divide-gray-500/25 divide-gray-700 divide-gray-800 divide-gray-900/10 divide-gray-900/5 divide-indigo-700 divide-opacity-10 divide-opacity-20 divide-white divide-white/10 divide-white/5 divide-x divide-y divide-y-0 filter from-[#80caff] from-[#ff4694] from-[#ff80b5] from-[#FF80B5] from-black from-gray-800 from-gray-900 from-indigo-100/20 from-transparent from-white line-clamp-2 line-clamp-3 peer peer-border-indigo-600 peer-border-t-2 peer-ring-2 peer-ring-indigo-600 placeholder-gray-500 prose prose-sm ring ring-0 ring-1 ring-2 ring-4 ring-8 ring-black/10 ring-blue-400/30 ring-blue-700/10 ring-gray-400/10 ring-gray-400/20 ring-gray-500/10 ring-gray-900/10 ring-gray-900/20 ring-gray-900/5 ring-green-500/20 ring-green-600/20 ring-indigo-400/30 ring-indigo-5...

Bitte melde dich an oder Loge dich ein um Details zu sehen.

I am looking for someone to help me with specialized design concepts for railway transducers to produce a clamp mechanism that is smaller than 100 kg in required load capacity, more than 50 mm in required opening size, and constructed out of steel. The ideal candidate would be able to investigate the requirements of the project and come up with a design concept that meets all project specifications. The successful candidate should have a strong background in mechanical engineering and the tools and resources necessary to complete the task in an efficient and effective manner.

Alter truss tie beam height Morning, need a price please for calcs / method to raise the tie beam in the 2 trusses in the attached pic the depth of the beam to sit directly under purlins, happy to either bolt & / or fabricate plates to clamp. Done several before but Need paperwork for building control. Tie beam is 220x100 & diagonal sections of timber are 280x100. Roof is 100x50 rafters, felt, 50x25 battens and natural stone flags, total internal span to inside of structural stone walls is 4300mm

...110÷230Vac 2 x Schneider A9N18372 - Circuit Breaker C120N 4P C 80A 10ka 1 x Schneider A9F89432 - iC60H 4P C 32A 10ka Circuit Breaker 1 x Schneider A9F89416 - iC60H 4P C 16A 10ka Circuit Breaker 4 x Cabur CB810 - CBD.70 THROUGH CLAMP 1 x Cabur TE820 - TEC.70/D EARTH TERMINAL 8 x SIEMENS through clamp 35mmq gray 8WH10000AM00 2 x Siemens through terminal 35mmq yellow green 8WH10000CM07 4 x Siemens 8wh10000ak00-16mmq gray through terminal block 1 x Siemens through terminal 16 mm² yellow green 8WH1000-0CK07 4 x SIEMENS Clamp size 6mmq gray color 8WH10000AH00 1 x Siemens Earth clamp green yellow 8wh10000ch07-6mm2 It must have the following logic: Incoming 3-phase neutral and earth power line with 70 sq. mm cable on the 5 terminals, from the terminals ...

Bitte melde dich an oder Loge dich ein um Details zu sehen.

The relationship between the two view projections in your step is also wrong. The main view and the left view should be at the same height The jig you sent me is a three-claw clamp I want another set of fixtures

I am looking for a freelancer who can create Catia and Solidworks files for my project. Skills and Experience Needed: - Proficiency in Catia and Solidworks software - Experience in creating both Catia and Solidworks files - Strong understanding of manufacturing processes Project Requirements: - Both Catia and Solidworks files need to be created - Specific dimensions and specifications will be provided by me - The purpose of these files is for manufacturing purposes. If you have the necessary skills and experience, please submit your proposal. Thank you!

I need to design and assemble a car battery, redesign the holder slightly and attach the clamp with screws

...items to the robotic arm for further processing. The following details outline the specific requirements for this project: 1. Software: The entire design must be created using Fusion360. No other software is allowed for the design process. 2. Handling Mechanism: The carousel should incorporate the handling of a single item by a clamp mechanism that targets all shipments at 12cm from the bottom and 8cm from the outside of the carousel. The handling surface of the clamp measures approximately 2cm by 2cm. Robotic arm is already in place and only carousel design is needed. 3. Rotation and Size Compatibility: The carousel must be able to rotate letters and shipments of various sizes. The acceptable size ranges are as follows: - Height: 14cm to 38cm - Width: 10cm to 29c...

I’m looking for a CAD designer to make a 3D model plans for the brass corner clamp shown in the attached photos. The width of the piece is 2.25” The length will be determined upon design The shape must create a 90 degree angle The insert must be able to hold 3/16” pane and should be smaller than 1/4”

...the discerning mountain biker. Crafted from aerospace-grade aluminum, this stem is engineered to provide maximum strength, stiffness, and durability while maintaining a lightweight and streamlined design. The ONE Pro MTB Stem features a unique 4-bolt faceplate design that distributes clamping force evenly across the handlebar, minimizing stress and increasing control. The oversized 35mm bar clamp diameter further enhances stiffness and precision, allowing for confident handling and precise steering in the most challenging terrain. Designed with the needs of high-performance riders in mind, the ONE Pro MTB Stem also incorporates a sleek and stylish aesthetic. Its minimalist profile and clean lines complement any bike build, while the laser-etched logos and anodized finish al...

Off grid solar station with an inverter connected to an external 3-pin socket need to track how many kWh's are discharged via the plug. Current thinking is tis might be a raspberry pi with a cellular modem, ideally connected to a clamp meter or similar Data sent to an IP address that can be accessed remotely in Excel or similar format. Does this sound achievable? If so, do you have any questions to be able to provide a quote. Ideal person is based in UK and able to help with hardware procurement and testing. Potential for future feature development Paul

I need someone, to be creative and apply a retaining mechanism to a finished model. The model is a bone clamp with fast lock ( a threaded rod and a knob), will need a retraining mechanism or a lock feature to lock the knob when you spin it so it wont loosen under any circumstances. Will send the model once we discuss and agree

Few line of Python code for assignment.

I want a pen-paper circuit diagram with all the details of the components and working algorithm of a 4 clamp non contact current meter, the detailed description is in the file attached below

Bitte melde dich an oder Loge dich ein um Details zu sehen.

Bitte melde dich an oder Loge dich ein um Details zu sehen.

I need a CAD drawing for 3D printing. It is a plastic cam buckle that will accommodate two 1/2" wide nylon straps running through it. The cam buckle can clamp the straps in place so they cannot move. Each strap is .075" thickness for a total of 0.16" thickness. I marked the approximate lengths/widths on the photo that I would like for the cam buckle. This photo is of a similar cam buckle. It does not need to be identical, but similar in style and able to meet the above requirements. Could you draw this for 3D printing? How much would it cost to design and how long? Thank you! -- Eileen

We are in the process of developing a hydraulic powered hand tool targeted at the automotive service industry. Please review the attached product concept sketch and inform me of the cost for a review of the concept design as it relates to practicality/feasibility. Note that the grip area of the tool is to clamp 3/8"~1/2" hard steel rods.

Describe the manufacturing technique and process required to produce the clamp used in a v- block assembly

Trying to design a two plane hydraulic log clamp. One hydraulic cylinder will move vertical. The second will move a sleeve over tubing horizontally in a straight line. The picture shows what I am trying to describe. It is not the roller chain piece. The piece behind it. It needs to travel 37” horizontally. I do not need the drawings for the second hydraulic cylinder that mover vertical.

Need a 2d CAD and 3d designer to design a c clamp press frame from structural streel flat bar. Please inquire for more details.

Need an expert who has good knowledge of machine learning with CLAMP with Data Science and Machine Learning concepts as they are applied to the Cybersecurity domain. Deadline - Today

Need an expert to complete a project on machine learning

Bitte melde dich an oder Loge dich ein um Details zu sehen.

I am looking to Build Pneumatic Air Cylinder Machine with Ram Tools for Form End of Tube. Copper Tube will require Clamp to hold the product while Linear Ram Stroke will Form Expansion or Shrink Function.

I am looking to Build Pneumatic Air Cylinder Machine with Ram Tools for Form End of Tube. Copper Tube will require Clamp to hold the product while Linear Ram Stroke will Form Expansion or Shrink Function.

Bitte melde dich an oder Loge dich ein um Details zu sehen.