Plc scada jobs

I have a Cognex vision camera already mounted above a high-speed food-and...delivers reliable results), setting proper exposure and calibration, then mapping the pass/fail result to our PLC over Ethernet/IP so the reject gate triggers in real time. Deliverables • Completed In-Sight job file, ready to load • Brief documentation covering tool settings, lighting guidance, and I/O mapping • Two remote sessions: initial commissioning and one follow-up after a full shift for final tweaks Acceptance criteria: during a controlled test the system must catch at least 95 % of known packaging defects with fewer than 1 % false rejects. I can schedule flexible hours for the remote sessions to match our production windows and will supply all images, part drawings, and P...

...optimisation. • Configuring and fine-tuning Siemens SCADA along with its associated automation hardware; familiarity with platforms such as Rockwell Automation or Schneider Electric is welcome but not essential. • Integrating third-party vendor packages—typical PLC, instrumentation, and communication subsystems—into the main control architecture. • Leading on-site troubleshooting, coordinating with OEM representatives, and closing punch-list items quickly. • Generating clear daily progress reports and final commissioning dossiers for client sign-off. Key requirements • Minimum 10 years’ field commissioning experience specific to SWRO or closely related desalination/water-treatment plants. • Proven track record work...

Ignition HMI/SCADA screen designer — operator UI redesign (regulated life-sciences) I’m looking for an experienced HMI/SCADA designer to redesign a set of operator screens for a regulated life-sciences application. The existing screens work but need a cleaner, modern, more user-friendly redesign. Scope: Redesign existing operator screens for clarity and ease of use Good HMI practice: clear layouts, logical navigation, readable alarm/status presentation, consistent styling Deliver a clean, modern, professional look Ideal experience: Ignition (Perspective and/or Vision) — required Industrial HMI/SCADA screen design Familiarity with GMP / 21 CFR Part 11 environments a plus Please share relevant HMI/SCADA work samples. Project specifics and s...

...and 2-D layout drawings, P&IDs, mechanical details, pipe-work and skid design, equipment sizing, instrument lists, cable routing and a coordinated bill of materials. Component selection must balance energy efficiency, durability and ease of maintenance; typical items will be high-pressure pumps, energy-recovery devices, membrane housings, cartridge filters, chemical dosing, control valves and a PLC/HMI package. Compliance & performance The plant should be engineered to meet commonly accepted international codes for pressure vessels, electrical safety, and quality management (ISO/ASME/EPA or equivalent). Target permeate quality is potable-grade, with recovery and specific energy consumption comparable to best-in-class commercial units. Process & milestones 1. Concept...

...conventions - Minimal hardcoding - Proper prop/configuration handling - Good folder structure - Comments where necessary - Git-based development - Easy integration with an existing React/Vite project ## Preferred Experience Experience in the following areas is a strong advantage: - React Three Fiber - - Industrial 3D visualization - Warehouse visualization - Digital Twin applications - SCADA / HMI visualization - ASRS / Automated Storage and Retrieval Systems - Material Handling Systems - Factory/industrial automation visualization - Web-based 3D dashboards ## What We Will Provide We can provide: - Existing React/Vite project structure - Existing components - Reference images/videos - 3D design requirements - JSON/API data structures - Component behavior requirements

...Control Engineer – PLC Programming & System Integration (Hitachi Preferred) We are looking for an experienced Industrial Air Compressor Control Engineer / PLC Programmer to support the development and integration of control systems for industrial air compressors. The ideal candidate should have hands-on experience with industrial air compressor control systems, PLC programming, electrical control circuits, and communication between compressor controllers and external automation systems. Experience with Hitachi air compressors is highly preferred. Experience with other major brands, such as Atlas Copco, Ingersoll Rand, Kobelco, and other industrial compressor manufacturers, is also welcome. 2. Required Technical Skills Candidates should have practical exp...

...Remote HMI Enclosure. Scope of Work: • Complete electrical schematic design in EPLAN Electric P8 for both panels. • Power circuit (400V AC) in the Main Panel for 2x vibratory motors and a braking device. • Control circuit (24V DC) for the PLC, safety relay, and pneumatic valves. • Hardware-based safety circuit (E-stop loop via Pilz safety relay). • Interconnections (terminals/cables) between the Main Panel and the HMI Enclosure. • 2D cabinet layout for both enclosures & Bill of Materials (BOM) export. Key Hardware Distribution: • Main Panel: Siemens S7-1200 PLC, Pilz Safety Relay, Peter Electronic AC-VersiBrake 230/400 (triggered via contactor NC contacts), and power distribution. • HMI Enclosure: Siemens KTP400 Basic HMI. •...

...conventions * Minimal hardcoding * Proper prop/configuration handling * Good folder structure * Comments where necessary * Git-based development * Easy integration with an existing React/Vite project ## Preferred Experience Experience in the following areas is a strong advantage: * React Three Fiber * * Industrial 3D visualization * Warehouse visualization * Digital Twin applications * SCADA / HMI visualization * ASRS / Automated Storage and Retrieval Systems * Material Handling Systems * Factory/industrial automation visualization * Web-based 3D dashboards ## What We Will Provide We can provide: * Existing React/Vite project structure * Existing components * Reference images/videos * 3D design requirements * JSON/API data structures * Component behavior requirements

Our two-turbine, 2 × 250 kW hydroelectric station is now in the construction phase and the control panels are ready for code. I need a complete PLC program built around a Delta CPU of AS series. The logic must: • Start, stop, and protect each Francis turbine, including speed regulation and emergency shutdown routines. • Modulate inlet gates to manage water flow while maintaining set-point head and optimising efficiency. • Continuously monitor generator voltage, current, frequency and bearing temperatures, triggering alarms and trips when limits are breached. An accompanying HMI (Delta DOP or compatible) with clear status pages, trending, and manual-override screens is expected. I will supply P&IDs, I/O lists, and functional descriptions—your...

...conventions * Minimal hardcoding * Proper prop/configuration handling * Good folder structure * Comments where necessary * Git-based development * Easy integration with an existing React/Vite project ## Preferred Experience Experience in the following areas is a strong advantage: * React Three Fiber * * Industrial 3D visualization * Warehouse visualization * Digital Twin applications * SCADA / HMI visualization * ASRS / Automated Storage and Retrieval Systems * Material Handling Systems * Factory/industrial automation visualization * Web-based 3D dashboards ## What We Will Provide We can provide: * Existing React/Vite project structure * Existing components * Reference images/videos * 3D design requirements * JSON/API data structures * Component behavior requirements

...controlled by PLC. The project includes complete electrical design and drawings for the PLC Control Panel, Walk-In Cooler, and Walk-In Freezer. The electrical design should include: Evaporator units and evaporator fan controls Electric defrost heaters Drain heaters Refrigeration solenoid valves Temperature sensors Termination Sensor Door switches and safety controls Contactors and control relays Circuit breakers and fuses Control power supplies PLC digital inputs and outputs PLC analog inputs and outputs Communication/network connections Cooler and freezer field wiring Compressor/condensing unit control connections Terminal blocks, wire numbers, and component tags Required Drawings & Documentation: Main power distribution diagram Complete PLC...

...brand assets immediately). • Final deliverables in layered PSD or AI files plus ready-to-post JPG/PNG (and MP4 if you opt for a subtle motion treatment). Speed matters—ideally first draft in a few hours, final by end of day. If you’ve got a quick, creative turnaround and know how to optimise visuals for Instagram’s algorithm, let’s make this giveaway pop. Company: Proactive Wellness Centers, PLC Website: Feel free to use logo and assets from the website. Giveaway: #1. Free Body Composition Analysis. $75 value. Includes brief consultation. Learn where you stand and what you can do to get the physique you want. #2. Free peptide consultation. $325 value. Peptides are game changers but you need to be guided to get the right ones and use them corr...

...Custom PLC & HMI We are looking for an experienced **automation programmer** to support our industrial projects. Our team will handle: - Customer requirements - Process study - Control philosophy - Sequence of operation - I/O requirements - Interlocks and operating conditions - HMI screen requirements The programmer’s role will be to **implement the provided control logic on our custom PLC and develop the required operator HMI screens**. Main tasks: - Convert our provided control logic and sequence into PLC software - Program digital and analog I/O functions - Implement timers, counters, interlocks and alarms as specified - Develop HMI screens based on our provided design and operating requirements - Connect PLC variables to the HMI - Test and...

I need a working TIA Portal V17 project that lets me test and demonstrate basic control logic on a Siemens S7-1200. The goal is to open the file in my own installation, start PLCSIM (standard or Advanced, whichever you prefer), and watch the logic execute without errors. Scope • Create a clean project with the correct S7-1200 hardware configuration. • Write and comment the fundamental control routines I will specify once we start (start/stop, interlocks, simple timers, fault reset). Keep the code in LAD or FBD so it is easy to follow. • Set up tags and watch tables so I can toggle inputs and observe outputs during simulation. • Provide a brief note inside the project (or as a PDF) explaining how to start the simulation and what to look for. Acceptance I will...

I have an assignment that must be completed entirely inside TIA Portal V17. The focus is PLC programming and, more specifically, setting up a full simulation that proves the code works without needing real hardware. Here is what I need from you: • A finished TIA Portal V17 project file that contains the programmed logic and is ready to run in the built-in PLC-Sim environment. • Evidence that the simulation functions correctly—screenshots or a short screen-capture video are fine. • A brief walkthrough (PDF or Word) explaining how to start the simulation, what each main block does, and any assumptions you made. I will provide the assignment brief, tag lists, and any I/O tables I already have as soon as we start. Stick to standard Siemens functio...

...solution around a Siemens S7-1200 and need the complete PLC program and matching Siemens HMI screens created in TIA Portal. All logic has to compile error-free, follow Siemens best-practice block structure, use symbolic addressing, and include clear comments so I can maintain it later. Once we start I will share the I/O list, functional description, and network settings; you will return a single TIA Portal project that contains both the PLC and HMI configurations. Deliverables • TIA Portal project file (.ap13 or later) with PLC and HMI fully linked • Export of all program blocks and tag tables • Short PDF explaining program structure, tag mapping, and any special instructions • Video or simulation showing each HMI screen driving the P...

I have a manufacturing assembly line that needs a solid Siemens S7-1500 program so the whole process runs reliably without constant operator tweaks. The PLC will take charge of every step on the line—from feeding parts, through each assembly station, to final transfer—maintaining sequence, interlocks, and safety signals while logging key production data for our MES. You’ll be working in TIA Portal (latest V17 preferred, but I can migrate from V16 if needed). The deliverable I expect is a fully commented PLC project file, tested in the simulator first and then ready for onsite download. If you can include basic WinCC Unified screens for status and fault diagnostics, that’s a plus, but the core focus is the ladder/SCL logic that makes the line cycle smo...

# Custom Industrial PLC Hardware & Firmware Development We are looking for an experienced **Embedded Systems / Industrial Electronics Engineer** to design and develop a custom industrial PLC/controller suitable for real industrial environments. The objective is to develop a reliable, professional, manufacturable controller based on a custom PCB, not a hobby-level Arduino or development-board solution. The engineer should have strong experience in industrial electronics, embedded firmware, PCB design, EMC/ESD protection, industrial communications, and microcontroller-based control systems. ## Project Objective Develop a compact industrial PLC/controller capable of handling digital and analog I/O, industrial communications, machine-control logic, and optional Io...

I need an expert to troubleshoot a communication issue with my Siemens S7-1200 system. The malfunction is related to the PLC program. Key requirements: - Expertise in Siemens S7-1200 systems - Experience with PLC program diagnostics and repair - Strong problem-solving skills Ideal Skills: - Siemens certification - Background in industrial automation - Knowledge of communication protocols used with S7-1200 Please provide a detailed approach and timeline with your bids.

My production line near Kanchipuram, Chennai relies on a Siemens PLC that now needs expert attention. I have every manual, wiring diagram, and software license ready for you—what I’m missing is the specialist who can quickly pinpoint the fault, restore reliable operation, and verify the fix on-site. You’ll begin with a diagnostic session at the facility, work through the documented logic and hardware, correct whatever is preventing normal function, then test under load to confirm stability. Once the PLC is running as intended, I’ll need a concise service report detailing the root cause, corrective steps, and any preventive recommendations. If you know your way around Siemens Step 7/TIA Portal, have a solid track record with on-site troubleshooting, a...

...Shafts - Couplings - Conveyors - Rollers - Belt drives - Chain drives - Gear systems - Hydraulic systems - Pneumatic systems - Pressure vessels - Storage tanks - Heat exchangers - Industrial fans - Blowers - Material-handling systems - Structural frames - Machine guards - Platforms - Access structures - Pipe supports ELECTRICAL & AUTOMATION - MCC panels - PCC panels - Control panels - PLC systems - HMI systems - SCADA - VFDs - Soft starters - Servo drives - Motors - Sensors - Encoders - Proximity sensors - Photoelectric sensors - Temperature sensors - Pressure sensors - Flow meters - Level transmitters - Instrumentation - Emergency-stop systems - Safety relays - Industrial networking - Control wiring - Cable trays - Electrical panels - Motor control circuits CAD/CAM ...

...high-resolution stock shots plus several custom clips we filmed on-site; after I award the project, I’ll send you a detailed shot list that flags the must-use moments. The edit must spotlight high-tech industrial environments—think power plants, expansive HVAC plants and modern manufacturing floors—while weaving in brief supporting shots of our technicians in today’s safety gear interacting with tablets, SCADA stations or similar digital tools. Camera moves should feel steady and purposeful (slow pans, cranes, or drone passes), and transitions need to be seamless so the loop is imperceptible. Key specs • 16:9, web-optimised MP4 (H.264) • Final length: 15–30 s, perfect loop point • Corporate colour grade (cool, clean, slightly d...

We are building an AI-powered root-cause investigation workspace designed for industrial maintenance and reliability teams. When critical assets (e.g., centrifugal pumps, booster compressors) fail, engineers lose days hunting for evidence scattered across historians (AVEVA PI), DCS/SCADA alarm logs, work order histories (SAP PM / IBM Maximo), and shift notes. We are looking for an experienced Industrial Reliability / Maintenance Engineer to partner with us to review our investigation workflows, test simulated plant failure datasets, and validate our automated evidence collection workspace. You’ll walk through our guided investigation flow, centered on centrifugal pumps, booster compressors, and heat exchangers, and tell me where the logic, data mapping, or user experience fal...

...pump sizing and plumbing schematic, that keeps consumption to a minimum without sacrificing cleaning efficiency. • Modular mounting scheme that lets an installer attach guides, rails or wheels without drilling through panels or voiding manufacturer warranties – easy installation is the top priority for end users. • 3D CAD files, BOM with off-the-shelf components, simple control logic (Arduino, PLC or similar), wiring diagram and assembly instructions ready for a prototype build. • Life-cycle maintenance plan and projected per-clean cost so we can preserve the “low-cost” promise. If you’ve engineered moving equipment for rooftops or automated cleaners before, I’d value design insights, material choices and any test data you can s...

I’m developing an industrial-grade programmable logic controller intended to run closed-loop control systems on a factory floor. The job centres on hardware only: turning the functional specification I will supply into a production-ready board set. At a minimum I need complete schematics, an optimised PCB layout, recommended component stack (with industrial-temperature parts), and manufacturing files ready for prototype build. The design must tolerate harsh electrical noise, accept 24 V DC field power, expose isolated digital and analogue I/O, and provide standard fieldbus options such as Modbus-RTU over RS-485; extra Ethernet or CAN is a plus if it fits within the available board footprint. Acceptance is straightforward: the first-run prototype should power up, enumerate over the ...

I need an experienced Siemens PLC-HMI technician who is completely comfortable in TIA Portal V19 to jump in and keep a manufacturing-equipment project moving. You’ll take ownership of three areas: • Software development – creating new Step 7 logic and WinCC HMI screens, as well as refining and expanding the existing code base to meet updated process requirements. • System configuration – setting up hardware profiles, network communications and any device parameterisation inside TIA Portal so the line boots cleanly from power-up. • Testing & troubleshooting – commissioning the solution on our test rack, running simulated I/O, chasing down faults and validating every safety interlock before we roll it onto the shop floor. Success for...

...a fast round of improvements. All three layers—software, the HMI interface, and the underlying PLC logic—require bug fixes plus a handful of small feature tweaks. I already hold the complete source code and full documentation package, so you will start with everything you need. The existing program’s language will be confirmed by our manufacturing partner as soon as you come aboard; please be comfortable working in the common IEC-61131 suite (Ladder Logic, FBD, or Structured Text) so we can move quickly once the exact dialect is named. Scope and deliverables (must be completed inside a one-week window): • Review the current codebase and documentation. • Implement the agreed bug fixes on the PLC side and align the HMI screens accordingly. &...

...with Kinco K615S-16DT PLC I am looking for an experienced **PLC/Industrial Automation programmer** to integrate a **Pepperl+Fuchs PGV100-F200-R4-V19** positioning/color sensor with a **Kinco K615S-16DT PLC**. The sensor communicates through **RS485**, and I need to establish communication between the sensor and PLC and correctly decode the data received from the sensor. ### Main Requirement The PLC should receive and process the data from the **Pepperl+Fuchs PGV100-F200-R4-V19** sensor, including: * Detected **color/code** * Position information * Position/orientation value * Determine whether the detected position is: * **Left** * **Center** * **Right** * Receive and store the corresponding sensor values in PLC registers * Display/u...

Ignition SCADA / PLC Integration Expert Needed Looking for an experienced Ignition SCADA and PLC integration expert for an ongoing industrial automation project. Experience with AutomationDirect Do-more/BRX PLCs, OPC UA, Modbus TCP, tag mapping, and Ignition configuration is preferred. The work involves communication setup, tag integration, optimization, troubleshooting, and SCADA development. 21 CFR Part 11/GMP experience is a plus. Please share examples of similar projects you have completed.

...automation and IoT solutions company providing end-to-end solutions for factories and manufacturing industries. We undertake projects in Industrial Automation, Energy Management, Water Management, IoT-based Monitoring, Wireless/LoRaWAN Solutions, Industrial Software, AI-based Reporting, and Process/Production Monitoring. Our capabilities include industrial hardware design, sensor and meter integration, PLC/automation integration, wireless data acquisition, cloud/dashboard development, alert systems, data analytics, and customized software solutions. We are interested in collaborating with project brokers, EPC companies, system integrators, consultants, and industrial solution providers who have ongoing or upcoming projects and require a reliable technology execution partner. ...

Hi Balaavikash, I noticed your profile and would like to offer you my project. We can discuss any details over chat. I want to implement a fertilizer mixing system using a Siemens LOGO! PLC.

I need a robust data-logging routine built for a Siemens S7-1200 that controls ...timestamp them accurately, and store the records so they can be exported as CSV or accessed through OPC later on. All code must be clearly commented so I can maintain or extend it after delivery. Deliverables • TIA Portal project file with the completed PLC program • Any HMI tag configuration needed for the logging function • Simple load-up guide plus demonstration proof that data persists after power-cycle Acceptance criteria Logged values must appear every second or faster, include precise timestamps, and remain intact if the PLC loses power or communication. A remote session to test live on my hardware is fine. Let me know your turnaround time and any detail you ne...

...motion control. Servo motors are mandatory for the motion stages, and I’m open to integrating any additional sensors or actuators the design demands, provided they mesh smoothly with the Siemens environment (TIA Portal, Step 7, alike). Solid experience in PLC ladder/structured-text programming, kinematics, and mechanical integration will be essential because the prototype must run reliably on the shop floor for live demonstrations. Deliverables • Detailed system architecture and BOM • All CAD, electrical, and pneumatic drawings • PLC code, HMI screens, and commented source files • Fully assembled, tested prototype with on-site commissioning • User manual, maintenance guide, and a brief handover session Acceptance criteria T...

I have an S7-1500 PLC at the heart of a new industrial-automation line and I need the complete machine-control logic written and linked to a Siemens HMI. The system must start, stop, interlock, and sequence several motors, valves, and safety devices while exchanging status and diagnostic data with a central SCADA node. You will work in TIA Portal and structure the program with fully commented function blocks so future maintenance is straightforward. Alongside the PLC code I need intuitive HMI screens that show live states, allow manual jog/override, and expose the usual maintenance counters. Alarm handling, fault acknowledgement, and clear messaging are essential so operators can react quickly on the plant floor. Before hand-off, simulate the project with PLCSIM ...

I'm seeking an expert to help with programming both HMI and PLC using Siemens SIMATIC. Key Requirements: - Siemens SIMATIC proficiency is a must - Experience with both HMI and PLC programming - Ability to deliver high-quality, efficient code - Troubleshooting skills are a plus

We are looking for an independent technical professional for a one-off remote technical handover easy and simple assessment lasting approximately Suitable experience includes smart-home systems, building automation/BMS, KNX, ELV, AV/control systems, PLC/SCADA, commissioning, troubleshooting, or similar technical systems. The selected person will review two short sanitized technical handover packages and answer a fixed set of takeover/troubleshooting questions based only on the supplied information. During the assessment, no AI tools, web search, outside documentation, or help from another person will be allowed. This is an independent evaluation only — no installation or ongoing work is required. Please include: 1- years of relevant hands-on experience; 2- your m...

...(SolidWorks or equivalent CAD preferred) plus an itemised bill of materials. • Define PLC or embedded control logic for weight accuracy, safety interlocks, and user-friendly changeovers between formats. • Supply a commissioning checklist and maintenance guide so the build team can assemble, test, and validate the line. Acceptance criteria 1. ±1 % fill-weight accuracy across all packaging formats at a minimum throughput of 20 units/minute. 2. Tool-less changeover between bags, jars, and pouches in under ten minutes. 3. Compliance with common food-contact regulations (e.g., FDA, EU 10/2011) and inclusion of stainless-steel contact surfaces. 4. Complete deliverables: CAD pack, schematics, BoM, PLC logic (or ladder diagram), and operation manual. ...

I am setting up a Mitsubishi FX5U PLC paired with an FX5-80SSC-G motion module that drives seven MR-JET-G servos. The goal is to run every axis in rotational camming and keep all seven servos perfectly locked to a master rotary incremental encoder. All development must be carried out in GX Works3, making full use of the motion instruction set and cam table utilities available for the iQ-F series. I already have the basic hardware topology and parameter files; what I need is a clean, well-structured program that: • Generates and downloads the required rotational cam profiles. • Establishes master-slave relationships so each MR-JET-G follows the encoder in real time. • Handles start-up homing, cam engagement, on-the-fly ratio changes, and safe stop routines. &bu...

We are looking for an independent technical professional for a one-off remote technical handover assessment lasting approximately 75–100 minutes. Suitable experience includes smart-home systems, building automation/BMS, KNX, ELV, AV/control systems, PLC/SCADA, commissioning, troubleshooting, or similar technical systems. The selected person will review two short sanitized technical handover packages and answer a fixed set of takeover/troubleshooting questions based only on the supplied information. During the assessment, no AI tools, web search, outside documentation, or help from another person will be allowed. This is an independent evaluation only — no installation or ongoing work is required. Please include: 1- years of relevant hands-on experience; 2- y...

I need a qualified engineer in Ahmedabad to take full ownership of designing and estimating electrical control panels for a manufacturing environment. The work covers everything from translating my process requirements into detailed schematics through to producing an accurate bill of materials and cost summary. Scope of work • Design low-voltage control panels that integrate an HMI, SCADA connectivity and secure remote-monitoring capability. • Prepare single-line diagrams, wiring schedules, panel GA layouts and terminal plans using AutoCAD Electrical or EPLAN (whichever you are fastest with). • Select components that comply with IEC/IS standards and are readily available in India. • Generate a clear BOM with vendor part numbers, quantities and pricing so...

..."safety pack" to move the valve to the "filter" position if there is a power failure. I basically need someone to set up a plc to control these various I/Os and help me choose/integrate some kind of controller or user interface. I am also completely open to other solutions. The only part that is already purchased is the 6-way valve, so nothing is set in stone. I am a contractor building a water feature in an outdoor habitat for red-footed tortoises. My client wants as much of the maintenance automated as possible. Key Requirements: - Use of PLC for automation - Position sensors to ensure pump is off during valve operation Ideal Skills and Experience: - Experience with PLC programming and setup - Familiarity with valve automation and control ...

I already have a Siemens S7-1200 on the factory floor and now need the full PLC logic and SCADA layer that will let us follow our energy profile in detail. Your task is to program the controller, map every relevant tag, and build the screens so my team can see: • Power consumption for each monitored feeder and machine • Voltage levels on all phases, with alarms on excursion • Equipment-specific performance metrics that we will define together On the SCADA side—WinCC inside TIA Portal is the natural choice, but I am open to another platform if it talks to the S7-1200 smoothly—you will create real-time graphs for the operators, historical data reports for management, and a trend analysis page that can be filtered by line, shift, or date...

I need a hands-on PLC specialist to help me bring a mechanical prototype to life during a one-week onsite sprint in Kochi, Kerala. The controller at the heart of the build is a Delta PLC, and the machine combines stepper motors, linear actuators and assorted sensors that must move in a tightly defined sequence. Your task is to write, load, test and fine-tune the program, then stand beside the rig while we commission it, troubleshoot any surprises and leave it running reliably. If you also know your way around Siemens or Mitsubishi hardware that is a welcome extra, but Delta fluency is what matters most here. Key expectations • Develop and document the PLC code that drives the full motion sequence • Integrate the stepper drives, linear actuators and se...

...tracking that remains reliable through rain, dust, vibration, and wide temperature swings. Please help me with a complete package: choosing a proven radar sensor, defining the mounting arrangement, outlining the wiring (power plus any 4-20 mA / Modbus or similar signal we decide on), and supplying a concise setup and calibration guide. If you have a neat way to integrate the readings into a local PLC or a cloud dashboard, let me know—I’m open to either solution so long as it can be maintained easily by plant technicians. Deliverables • Sensor and hardware specification with vendor links • Mechanical drawing or sketch of the installation point • Wiring / communication schematic • Step-by-step commissioning instructions • Brief O&...

Looking for an experienced PLC, Instrumentation & Automation tutor to teach a beginner student. The ideal tutor should have strong practical knowledge of PLC programming, ladder logic, sensors, electronics, instrumentation, HMI/SCADA, and industrial automation, along with excellent spoken English. The tutor should be patient, able to explain technical concepts in a simple way, and preferably have experience teaching young or beginner students through practical, hands-on examples.

My industrial automation project is already wired and powered; what I am missing is a solid CoDeSys program that brings the PLC and its accompanying HMI to life. All field devices are connected, I/O lists are ready, and I can give you the functional description and signal tables the moment we start. Here is what I need from you: • A CoDeSys project file that controls the PLC exactly as described in the functional spec, fully commented and structured for future maintenance. • An HMI application matched to that logic—alarms, set-points, status screens, and basic trending—delivered in the native editor so I can tweak graphics later on. • Remote commissioning support to walk through the first start-up, verify every I/O, and fine-tune any timing o...

...text-based result display Once the second image is captured the app should immediately show a clean text summary such as “Length shrinkage: 3.2 % Width shrinkage: 2.7 %”. No dashboards or plots are necessary, but the code should leave room for future extensions. • Automation hooks Please expose a command-line flag or minimal API so the measurement routine can be triggered from an external PLC later on. Acceptance will be based on: 1. Repeatable detection of the four marks on at least 30 consecutive samples with ≤ 0.5 mm error, verified by a calibrated ruler. 2. Executable installer and full Python source, commented and ready to re-build. 3. A brief user manual covering camera setup, calibration procedure, and typical runtime (target < 5 s ...

I have a steady stream of PLC-, HMI- and automation-based projects that need crisp, production-ready drawings. Right now my top priority is a complete set of power and control circuit schematics for an automation panel. All work must be prepared in AutoCAD or AutoCAD Electrical, following the IEC symbols and my in-house layer, title-block and revision standards. You will receive the PLC I/O list, brief control philosophy and preferred part numbers. From that, I expect a clean schematic package plus the supporting documents that let my panel fabricator move straight to wiring. Deliverables • Power & control circuit schematics (DWG) • Corresponding BOM / component list (Excel or embedded table) Acceptance criteria The drawings must match the supplied I/O list...

For a basic carwash system I need someone who can write a bitshift register to control the timing of the Tunnel. The whole system would have about 10 inputs and 24 outputs, it is important that we can change the basic settings (timing of the outputs) through a HMI. We are used to working with Siemens in TIA portal and used the Siemens 1200 series PLC's and KTP700 HMI in similar projects.

We are an established industrial water treatment company based in the United States looking for a highly experienced PLC/HMI engineer to assist with the development of a wastewater treatment chemical feed and process control system. This is not a simple PLC programming assignment. We are looking for a contractor who can help develop portions of the control philosophy, identify design gaps, recommend best practices, and create a professional, maintainable control system that can be supported by our team long-term. The project includes: Chemical feed control systems Polymer blending systems DAF (Dissolved Air Flotation) process controls Clarifier chemical dosing pH monitoring Turbidity monitoring Conductivity verification Flow-paced chemical dosing Pump duty/standby control ...