The term CAD/CAM denotes computer aided design and computer aided manufacturing. It is usually referred to in the context of software tools that perform a wide range of engineering functions. Selecting a proper CAD/CAM system is important to ensure that the stages of conceptualization and final production are under proper control. If you are foraying into computer-aided design and manufacture, you need an expert. There are many freelancers who can do this job for you at a relatively low cost. So, post your CAD/CAM job here and make your life easier! CAD/CAM Designers anheuern

Filter

Meine letzten Suchanfragen
Filtern nach:
Budget
bis
bis
bis
Typ
Fähigkeiten
Sprachen
    Jobstatus
    124 Gefundene Jobs, Preise in EUR
    simple project 6 Tage left

    2d plan of AutoCAD with proper layer system.

    €11 (Avg Bid)
    €11 Gebot i.D.
    30 Angebote

    East Side Clothing in Port Melbourne is looking for a freelance clothing patternmaker to collaborate inhouse on our two brands, Stella(reg) and Estelle(plus) 2-3 days per week. Must have experience with ladies clothing patternmaking. We are a small team based in Port Melbourne, equipped with StyleCAD and inhouse sample room. Position available to start immediately on site in Port Melbourne with th...

    €18 / hr (Avg Bid)
    €18 / hr Gebot i.D.
    7 Angebote

    Design for Theory of Mechanics & Materials , For the four link Mechanism

    €124 (Avg Bid)
    €124 Gebot i.D.
    14 Angebote
    Trophy icon Master plan layout 9 Tage left

    Hello, I have a cad file with land extent of 120 Acres. we want to make a master layout with 4000 Sqyards each plot. I need a 2D layout with Area and Dimensions of each plot within the plot name I have attached some examples of works given to me before, I need similar to these Note: Please make sure you maximize 4000 SQYD plots, If not possible in some areas, you can make 2000 Sqyrds or 1000 Sq...

    €115 (Avg Bid)
    €115
    1 Einträge

    I need a 2JZGTE Engine Block, Cylinder Head, Valves, Camshafts, Crankshafts, Pistons, Connecting Rods, Connecting Rod Caps, (ETC!!!) You get The Gist, I want the entire Working Engine, Does not have to be Perfectly Scaled to Exact Outer Dimensions.

    €966 (Avg Bid)
    €966 Gebot i.D.
    17 Angebote

    I need a water treatment plant designed on autocad using some notes I have to explain and I also have an example to follow.

    €28 (Avg Bid)
    €28 Gebot i.D.
    17 Angebote

    I need elvations and site plan.

    €147 (Avg Bid)
    €147 Gebot i.D.
    15 Angebote

    I need a 2JZGTE Engine Block, Cylinder Head, Valves, Camshafts, Crankshafts, Pistons, Connecting Rods, Connecting Rod Caps, (ETC!!!) You get The Gist, I want the entire Working Engine, Does not have to be Perfectly Scaled to Exact Outer Dimensions. I Will Provide What I have AS References. I do not know the dimensions. I DO NOT Want a lop sided pile of crap that looks good. I want as best as y...

    €364 (Avg Bid)
    €364 Gebot i.D.
    20 Angebote
    Mechnical Engineer 6 Tage left
    VERIFIZIERT

    Need a mechanical Engineer for design of a mechanical related task.

    €325 (Avg Bid)
    €325 Gebot i.D.
    31 Angebote

    I would like to hire the mechanical engineer who can design the inflatable / deflatable balloon which can sense the pressure gradients at the entire balloon surface differentially and then output that information in the 3D fashion, so what part of the balloon surface (e.g right, left, proximal, distal, top, bottom ) have high or low pressures and then able to inject semiliquid into the areas which...

    €422 (Avg Bid)
    €422 Gebot i.D.
    13 Angebote

    Nos encontramos en búsqueda de Programadores CNC (3 a 5 ejes) con experiencia en CAD-CAM Catia V5 con alto poder de análisis y resolutivo. Nuestra propuesta apunta a programadores freelance para desarrollar programas CAM sobre piezas de gran porte y altos estándares de calidad. Los principales objetivos de la función serán: - Generación de programas CAM s...

    €374 (Avg Bid)
    €374 Gebot i.D.
    7 Angebote

    I WANT A PERSON WHO KNOWS ABOUT DESIGNING A PROGRAM ( SIMILAR WITH AN ALREADY EXISTING ONE) BUT IMPROVED AND WITH MORE OPPORTUNITIES USING 3D IMAGES ON THE SMILE DESIGN. I WILL NEED TO USE STL FILES, JPEG IMAGES AND 3D FACE SCANS AND BRING THEM ALL TOGETHER IN THE PROGRAM.

    €15 / hr (Avg Bid)
    €15 / hr Gebot i.D.
    13 Angebote

    Progettista Solidworks..,.......... CAD/CAM Progettazione manifatturiera Ingegneria meccanica Progettazione del prodotto Solidworks

    €323 (Avg Bid)
    €323 Gebot i.D.
    10 Angebote

    We are a glazing contractor located in Southern California. We fabricate and install Aluminum-Framed Entrances and Storefronts, Glazed Aluminum Curtain Walls, and other misc glass related products. We are looking to outsource Estimating material take-offs, shop drawings, and fabrication drawings. The attached project is a small school with (5) openings utilizing Arcadia AFG7251, 2-1/2 x 7-1/4, T...

    €394 (Avg Bid)
    €394 Gebot i.D.
    13 Angebote

    I have a smooth simple 5 inch plastic part I wanted to 3D print

    €71 (Avg Bid)
    Lokal
    €71 Gebot i.D.
    19 Angebote

    Looking to convert schematic to a CAD file. Attached design is not calibre specific but looking for it to be chambered in .223 calibre

    €282 (Avg Bid)
    €282 Gebot i.D.
    38 Angebote

    Convert survey drawing to cad plan

    €78 (Avg Bid)
    €78 Gebot i.D.
    39 Angebote
    SolidWorks Concrete Tests 5 Tage left
    VERIFIZIERT

    The attached video clip was supposed to run another 25 seconds or so with the workman pointing out various parts of the "Type B Air Meter," photo attached. I need an animation of the meter zooming in and out at various meter prts with text and arrows identifying the part. This is for a training video. I will provide more detail to the freelancer seleted. Thank You

    €107 (Avg Bid)
    €107 Gebot i.D.
    32 Angebote

    Existing granny flat, need some architectural drawings and BAS

    €236 (Avg Bid)
    €236 Gebot i.D.
    35 Angebote

    Model and/or Calculate certain electrical characteristics of a copper wrapped solder column with diameter 0.50mm x 2.2mm long. Output requires following data: 1. DC resistance measured from end to end of the pin. 2. Resistive model (make a schematic) showing resistances in series and parallel. 3. Theoretical maximum current rating of the pin using the dimensions of the copper ribbon as a guideli...

    €403 (Avg Bid)
    €403 Gebot i.D.
    14 Angebote

    need lateral / load calculations for a beam supporting a covered deck. 4x8 girder below 2x6 floor joists below 2x6 decking floor. with roof over . per ibc 2018

    €154 (Avg Bid)
    €154 Gebot i.D.
    20 Angebote

    I need an expert engineer that can do complicated drawings

    €466 (Avg Bid)
    €466 Gebot i.D.
    84 Angebote

    I have gerber files and full BOM for a PCB design project I worked on with another freelancer This freelancer has gone AWOL recently before he could show me how to order samples from the site Should be a relatively quick job for someone that know's what they're doing

    €24 (Avg Bid)
    €24 Gebot i.D.
    16 Angebote

    COMMERCIAL STEEL FRAMED BUILDING REQUIRES A FLOOR SLAB AT 60M X 40M IN EXTENT DESIGNED TO CARRY RACKING LOADING TO 7.0 METRES HEIGHT

    €2910 (Avg Bid)
    €2910 Gebot i.D.
    21 Angebote
    98 guibal rd 5 Tage left

    permitted development side extension - extending kitchen out to side of property. Building control needs the following: a block plan, existing and proposed elevations, sections, construction details and a construction specification. Please see attached existing floorplan and a sketch i made of the proposed extension.

    €567 (Avg Bid)
    €567 Gebot i.D.
    20 Angebote

    We are Empyres Group, a mining and mineral processing company indulged in manufacturing and trading of products like silica sand, red ochre, limestone, dolomite etc. and we are looking for a Plant Engineer for a Silica Sand processing plant.

    €453 (Avg Bid)
    €453 Gebot i.D.
    2 Angebote
    File conversion 5 Tage left

    I have a 2015 version of VECTORWORKS which will not convert files to DWG to be read by AutoCAD or other CAD programmes. I need a couple simple 2D drawings converted from .VWX to .DWG for the engineer so they do not have to repeat a host of measurements for retaining wall design.

    €12 / hr (Avg Bid)
    €12 / hr Gebot i.D.
    28 Angebote
    Shop drawings 4 Tage left

    Looking for someone to do the shop drawings in any 3D software on an ongoing basis. Have something ready to go to be done in Solidworks or Inventor. Attached is the drawings and I need the cast in plate to be drawn and supplied. Thanks Vivek

    €39 (Avg Bid)
    €39 Gebot i.D.
    20 Angebote

    I need local (Seattle, WA or Kent, WA) manufacturing engineers proficient in SolidWorks. We are looking for 1-2 people/consultants to help a client create missing drawings for parts and sub-assemblies. This is a light industrial assembly/manufacturing facility. It would be a mix of onsite/remote delivery.

    €43 / hr (Avg Bid)
    €43 / hr Gebot i.D.
    3 Angebote

    I need a complete design with electricals of a 300 Ton CNC Press brake machine.

    €807 (Avg Bid)
    €807 Gebot i.D.
    10 Angebote
    Panel Layout 4 Tage left

    We manufacture panelwork of 120 designs with different connector layouts. we need a cad designer to take a typical drawing and work within our AutoCAD dynamic blocks system to create the designs. We need ongoing help with regular projects so would prefer to find someone for regular work.

    €16 / hr (Avg Bid)
    €16 / hr Gebot i.D.
    42 Angebote

    I need CAD plans completed for an existing tenancy in Takapuna. This is part of lease deal and the tenant requires these drawings to be provided asap to assist them with their fitout planning. I only have rentable survey area plans on file.

    €36 / hr (Avg Bid)
    €36 / hr Gebot i.D.
    30 Angebote

    I tried this once before, however the manufacturer need a certain file type. It is a cad file type called a STP file - A three-dimensional object data saved in the Standard for the Exchange of Product Data (STEP) format. Most STEP files are saved with the .stp file extension. The goal is to 3D print these to a 2 foot size using SLS - Selective laser sintering.

    €811 (Avg Bid)
    €811 Gebot i.D.
    37 Angebote

    Architect design and drawings are needed for 700sqf house addition

    €2932 (Avg Bid)
    €2932 Gebot i.D.
    26 Angebote

    We are looking for someone to help us in establishing the best cycle time of production of a machined part on CNC machining centers and turning machines For new parts(quotation), and for parts we already produce trying to make the process more efficient if possible. Using Cad/Cam.

    €17 / hr (Avg Bid)
    €17 / hr Gebot i.D.
    29 Angebote
    MVM Church 4 Tage left
    VERIFIZIERT

    Our congregation would like to build a sanctuary. We have a member who has a Chief Architect program that is drawing up our floor plans. The building will include restrooms and several classrooms also. We are nearing the point where we will be needing structural drawings.

    €43105 (Avg Bid)
    €43105 Gebot i.D.
    6 Angebote

    Need a civil engineer to develop plans for Drainage and Grading for two (2) lots in Nampa. Looking to have this done asap.

    €345 (Avg Bid)
    €345 Gebot i.D.
    15 Angebote
    Enclosure design 4 Tage left
    VERIFIZIERT

    We have a 3d case design in solid works and we are looking for a cad designer to do some modifications to this case. We would like to add a couple of ports and fan placement, etc. to the case. The dimensions of the case are approximately 45*30*30 cm.

    €259 (Avg Bid)
    €259 Gebot i.D.
    84 Angebote
    3D Lemon STL 4 Tage left

    A half of Lemon. I need for cnc.

    €23 (Avg Bid)
    €23 Gebot i.D.
    25 Angebote
    Cell Guide 4 Tage left

    Needing a quote for mechanical dwg of the attached part. Material G10 Use ASME-Y14M (metric dwg) Single dwg with bom shown Std shop & water jet tols

    €43 / hr (Avg Bid)
    €43 / hr Gebot i.D.
    1 Angebote

    I'm in need of a CAD drawing for a prototype I'm trying to have made. I've attached a picture of something similar. I need the inside diameter to be 2" or a little bigger (it needs to go over a 2" outer diameter pipe). The inside height needs to be 11" and there needs to be a 5/8" hole drilled through both sides 1" from the bottom (not a slit as depicted...

    €69 (Avg Bid)
    €69 Gebot i.D.
    30 Angebote
    Solidworks model for spine 4 Tage left
    VERIFIZIERT

    looking for Solidworks expert. I need the model for spine

    €7 - €13 / hr
    Versiegelt
    €7 - €13 / hr
    48 Angebote

    2 bathroom gut and renovations - need drawings for permit approvalated in Canada so we need BCIN number if possible

    €266 (Avg Bid)
    €266 Gebot i.D.
    30 Angebote

    Need 3dmodel of a object. Cad file available but only the surface model needed that in 3d solid model

    €16 (Avg Bid)
    €16 Gebot i.D.
    22 Angebote
    CAD/CAM designer 4 Tage left

    Looking to have our current designs processed professionally with an interlocking system. No designs will be sent until a confidentiality agreement has been signed.

    €283 (Avg Bid)
    €283 Gebot i.D.
    52 Angebote

    I want you to design the exterior of my house for me. I already have the floor plans drawn and all I need is the design for the exterior of my house.

    €135 (Avg Bid)
    €135 Gebot i.D.
    75 Angebote
    Structural drawing templates 4 Tage left
    VERIFIZIERT

    I'm a Structural Engineer who has recently set up a business. I need a technician to work with - initially to set up drawing/model templates in AutoCAD / Revit but then on an ongoing occasional basis for producing drawings.

    €374 (Avg Bid)
    €374 Gebot i.D.
    15 Angebote
    2d plans AutoCad -- 2 4 Tage left
    VERIFIZIERT

    Hey. I need to redraw some drawings from hand drawn to an autocad one. I attach some plans which are hand drawn and then one which is final. I need such quality. I would need 100-200 plans a month.

    €15 / hr (Avg Bid)
    €15 / hr Gebot i.D.
    149 Angebote
    Ansys CFD Analysis 4 Tage left
    VERIFIZIERT

    I will need someone to perform a CFD Analysis on 4 different car radiator models - Solidworks file will be provided ( or IGS version ) - Meshing has to be done - Find the most Efficient and Least Efficient car radiator - Explain the outcome of all 4 radiators to me in point form Below are the JPG pictures of the car radiators for your convenience

    €88 (Avg Bid)
    €88 Gebot i.D.
    26 Angebote

    I need an arhitect who can custom design my house plan. Area = 2000 to 2200 sq ft. should be of 4bhk plan, ground floor only

    €66 (Avg Bid)
    €66 Gebot i.D.
    31 Angebote

    Top CAD/CAM Gemeinschafts-Artikel