Baumanagement Jobs

A new medium-scale office building is moving from concept to construction and now needs a complete structural design package. The architectural layout is ready; what remains is a full set of engineering documents that will let the contractor break ground with confidence. Scope • Perform all structural analysis and calculations for gravity and lateral loads in compliance with local code. • Optimise framing, slab, beam, and column schedules to balance strength, economy, and constructability. • Produce detailed drawings (PDF + editable CAD/BIM) with notes, sections, connection details, and material specs. • Provide a concise design report summarising assumptions, load take-offs, software output, and safety factors. Preferred tools include ETABS, SAP2000, , or equ...

I own a rectangular corner plot measuring 85 feet × 53 feet, with roads along both the 85-foot and 53-foot sides. The 85-foot side faces southeast (SE), while the 53-foot side faces southwest (SW). There is a strong possibility that the opposite 85-foot side will also have a road in the future. Effectively, this makes the plot a three-side road–facing property. Project Overview I am planning to develop a mixed-use residential property (rental-cum-personal) on the right side of the plot, with a green/open area on the left side. The design should accommodate current needs while also allowing future flexibility and upgrades. Site & Entry Requirements Primary entrance to be from the existing Southeast (SE) facing road, located near the right-side corner of the plot. Secondary...

My beach cottage sits a short stroll from the shoreline, and I want the outdoor space to echo the home’s clean-lined, modern cottage feel while staying practical for seaside living. The yard has to welcome friends during the day and provide a relaxed vibe at night. Key ideas to weave in: • A continuous surface of natural brick stone that can handle salt spray and keep bare feet cool. • Shade is built primarily through dense, strategically positioned tree planting, complemented by a simple pergola that frames the dining zone. • A compact outdoor kitchen or grill station that lets me prep food without running indoors. • An exterior shower for rinsing off sand and salt. • A small, open-air workout nook—enough room for yoga mats and light weights...

I'm seeking a skilled designer to create a golf net structure, primarily serving as a safety barrier at a sports facility. The structure should be durable, effective. Our net is 150M long , 6 concrete pads at 30m spacing 2 concrete pads with 2 tension posts 3mx3mx2.5m deep concrete pads Piled to a minimum of 9M 4 on each pad 17m high we would like the net to be. Trees have been removed so no more can come over onto net Keeping existing foundations Ideal Skills and Experience: - Experience in designing safety net structures - Knowledge of materials, especially nylon - Background in sports facility design and safety regulations Please include relevant experience in your bids.

I already have a completed architectural design and now need a civil/structural engineer to translate it into fully detailed construction drawings. Your work will form the basis for permitting and for my contractor’s on-site execution, so accuracy and code-compliance are critical. Scope • Review my architectural plans (DWG/PDF) and flag any dimensional conflicts that might affect the structural scheme. • Perform the necessary structural sizing and detailing based on standard analysis methods (ETABS, STAAD Pro, or your preferred equivalent). • Deliver the full set of structural construction drawings in AutoCAD (DWG) and printable PDF, including: – Foundation plan and footing schedule – Column, beam, and slab reinforcement details – R...

I need detailed septic system plans for a developed residential property in Hawaii, covering less than 1 acre. The plans must comply with local regulations and be suitable for existing structures. Requirements: - Accurate site assessment - Compliance with Hawaii's environmental regulations - Detailed diagrams and specifications - Experience with residential septic systems Ideal Skills and Experience: - Expertise in septic system design - Knowledge of Hawaiian regulatory requirements - Experience with developed properties Please provide relevant experience and a timeline.

Quiero darle un giro contemporáneo-tropical y moderno-cálido a mi vivienda. Busco un arquitecto que desarrolle un concepto con volúmenes simples, líneas limpias y techos inclinados metálicos, combinando piedra, madera y concreto. La fachada debe sentirse abierta y luminosa: ventanales amplios, iluminación arquitectónica indirecta y un pórtico alto que marque el acceso. También necesito integrar un espacio para dos vehículos que pueda funcionar con doble propósito. Áreas a intervenir • 1 dormitorio • 1 oficina • 1 sala-recibidor • 1 baño Interiores y acabados Prefiero paredes acabadas con pasta y una atmósfera minimalista pero acogedora. Quiero que las texturas nat...

I need a detailed architectural or CAD plan for an entire restaurant. Key requirements: - Accurate measurements and layouts - Design for dining area, kitchen, and other spaces - Professional quality suitable for construction Ideal skills and experience: - Expertise in architectural design or CAD software - Experience designing restaurant layouts - Attention to detail and creativity Please provide samples of previous work.

I need a detailed on-site survey for multiple retail stores so we can confirm that our new waste compactor will fit, power up, and be serviced safely. Your report has to give me everything the installer and electrician will ask for: • Site measurements – all critical dimensions around the proposed compactor area, ceiling heights, door clearances, and any obstructions, recorded in both metric and imperial units. • Electrical requirements – panel rating, breaker space, conduit path, distance to the closest suitable connection, and clear photos of the existing service. Confirming voltage and phase onsite. • Accessibility & placement options – path of travel for delivery, turning radii, dock or grade-level access, and at least one recommended mounting l...

I need a detailed on-site survey for multiple retail stores so we can confirm that our new waste compactor will fit, power up, and be serviced safely. Your report has to give me everything the installer and electrician will ask for: • Site measurements – all critical dimensions around the proposed compactor area, ceiling heights, door clearances, and any obstructions, recorded in both metric and imperial units. • Electrical requirements – panel rating, breaker space, conduit path, distance to the closest suitable connection, and clear photos of the existing service. Confirming voltage and phase onsite. • Accessibility & placement options – path of travel for delivery, turning radii, dock or grade-level access, and at least one recommended mounting l...

I need a detailed on-site survey for multiple retail stores so we can confirm that our new waste compactor will fit, power up, and be serviced safely. Your report has to give me everything the installer and electrician will ask for: • Site measurements – all critical dimensions around the proposed compactor area, ceiling heights, door clearances, and any obstructions, recorded in both metric and imperial units. • Electrical requirements – panel rating, breaker space, conduit path, distance to the closest suitable connection, and clear photos of the existing service. Confirming voltage and phase onsite. • Accessibility & placement options – path of travel for delivery, turning radii, dock or grade-level access, and at least one recommended mounting l...

I'm looking for a skilled freelancer to develop a takeoff system for my roofing company. The system should work from both photos and drawings to create: - Accurate material list - Cost estimations - Labor requirements - Integrate with our internal excel pricing sheets depending on the product we are using - take the required information from documents to produce costs - produce a estimate for sign off ready to send to clients Ideal candidates should have experience in construction estimation software and a strong understanding of roofing materials and labor. Please submit detailed project proposals. Key issues are there are around 40 different roofing and pricing schedules and there are a lot of variables that come to pricing.

I need a concise, job-ready Quality Assurance Plan for my new residential build. The document must spell out, in plain language and with practical templates, how we will: • Verify materials quality from procurement through installation of all gas mitigation controlls including pilling • Set and monitor workmanship standards for every trade on site • Enforce safety protocols and all gas-mitigation controls from excavation to hand-over Please align every section with current local building codes, relevant international standards, my custom project requirements, and the NSW EPA Guidelines. At hand-over I expect a single, well-structured PDF (or editable Word file) that includes checklists, inspection schedules, acceptance criteria, and a clear responsibilities matri...

Je dois finaliser la gestion documentaire d’un lot de 1 000 isométriques (SW et FW) pour notre chantier. Votre mission se décline en trois volets : • Bullage détaillé des isométriques - Chaque plan devra être entièrement bullé, avec des annotations précises indiquant l’emplacement de chaque soudure. - Le format d’origine des fichiers restera inchangé ; je récupérerai les plans annotés en PDF et le fichier source modifié. • Analyse visuelle des soudures - Réaliser une revue complète en distinguant clairement les travaux effectués en atelier et ceux réalisés sur site. - Signaler toute non-conformité ou point...

I need a dependable professional who can take full ownership of day-to-day site operations. Your first priority will be thorough, documented site inspections that keep every phase of the project transparent and on track. Beyond that, you’ll keep an eye on ongoing activities, enforce safety protocols, and step in early when you spot anything that could jeopardize timelines or compliance. You’ll speak with our clients far more often than anyone else on the team, translating real-time site conditions into concise updates they can act on. Clear communication, accurate reporting, and a talent for anticipating issues are therefore essential. To keep expectations crystal-clear, here’s what I’ll look for: • Daily inspection walk-throughs with photographic evidence ...

Bitte melde dich an oder Loge dich ein um Details zu sehen.

Busco a un ingeniero estructural que desarrolle el cálculo completo para una tolva estática de acero. Necesito un análisis estrictamente estático que compruebe resistencia, estabilidad global y límites de deformación bajo las combinaciones de carga pertinentes (peso propio, material contenido, viento y posibles cargas de mantenimiento). Para agilizar la revisión, adjunta todo en un solo paquete que incluya: • Memoria de cálculo detallada con hipótesis, normas aplicadas y resultados numéricos. • Modelo editable en la herramienta que prefieras (SAP2000, STAAD, ANSYS o similar) junto con archivos de salida. • Planos de espesores, refuerzos, soldaduras y notas de fabricación listos para taller. • ...

I need a full structural design package for a new commercial car showroom. The building must safely support the weight of vehicles on display and in storage, so high-load-capacity floors are the core requirement around which the entire frame, slab system, and foundation will be engineered. To keep coordination smooth, please base all modelling and analysis in any of the standard tools—STAAD Pro, ETABS, SAP2000, or Revit Structure—so I can share files easily with the wider project team. I will provide the architectural layout, column grid preferences, and preliminary soil report as soon as we begin. Deliverables • Signed-off calculation report covering gravity, lateral, live-load vehicle stacking, and code checks • Complete structural drawings (PDF + DWG) for found...

I need an estimator to review the floor plans and pull the partition wall-length measurement in linear feet, translate those figures into drywall square-footage requirements, and prepare a material take-off for that scope. I’ll need the framing of the partitions and the drywall. Those are the two scopes, framing and hanging drywall only. This does not include any drywall finishing. That will be completed by others. I will send the PDF plans as soon as we agree to proceed. Please use any professional takeoff software you are comfortable with—Bluebeam Revu, PlanSwift, On-Screen Takeoff, or a comparable tool is fine—so long as the numbers reconcile against the architectural sheets. Deliverables: • total wall lengths (LF) referenced to sheet and detail. • Corres...

I need the February prSchedule for Feb (Gant chart being updated) Termite barrier install main house - 4th Feb Footings dig completion 6th Feb 4/5th February - Plumbing site works Main house timber delivery - 5th Feb Carpentry main house lower level and upper internal - 10th Feb - 28th Feb LVL deliveries main house - 12th Feb Steel delivery balance of footings - 13th Feb Steel install balance of footings - 16th - 20th Feb Engineer inspection 20th Feb Footings pour 23/24th Feb Blockwork balance retaining walls and garage walls 25th Feb commence Window delivery main house 24th Please mirror the exact dates, apply logical links where obvious (FS relationships, lag where needed), set the critical path, and produce a clean bar layout that reads well when printed to a single-page PDF. Deliver...

I need detailed architectural blueprints for a new traditional-style house. The blueprints will be used for construction planning. Ideal Skills and Experience: - Proficiency in traditional architectural design - Experience in creating comprehensive construction blueprints - Knowledge of local building codes and regulations - Strong attention to detail and accuracy Please provide samples of previous work and an estimated timeline.

I’m planning a new pool that will serve multiple commercial facilities—a hotel, apartment complex, and on-site gym—and I want a cohesive, modern aesthetic that instantly feels high-end yet welcoming. The core concept should balance day-to-day recreational use with the durability and safety standards required for busy public spaces. Key design direction • Style: clean, Modern lines and finishes • Must-have feature: integrated LED lighting for both ambiance and clear nighttime visibility • Setting: outdoor courtyard with direct access from all three facilities Scope of work I’ll need a full design package that includes schematic sketches, 3D visualisations, material and equipment schedules, and construction-ready drawings with MEP coordination...

I have prepared a detailed scope of works for a single-family residential project and now need a complete architectural electrical diagram produced from it. The drawing must show all lighting, power, and low-voltage runs, circuiting, panel schedules, and any special notes that appear in the scope. Please base every symbol, legend entry, and sheet reference on standard residential drafting conventions so it can be handed directly to the builder and inspector without re-work. Because this is a single-family home, space usage is straightforward, yet accuracy is critical. I need the finished drawing in both PDF for immediate issue and the original CAD file (DWG or DXF) so we can make future revisions in-house. Turnaround is urgent—ASAP once you receive the scope and floor plans. Let ...

A new medium-scale office building is moving from concept to construction and now needs a complete structural design package. The architectural layout is ready; what remains is a full set of engineering documents that will let the contractor break ground with confidence. Scope • Perform all structural analysis and calculations for gravity and lateral loads in compliance with local code. • Optimise framing, slab, beam, and column schedules to balance strength, economy, and constructability. • Produce detailed drawings (PDF + editable CAD/BIM) with notes, sections, connection details, and material specs. • Provide a concise design report summarising assumptions, load take-offs, software output, and safety factors. Preferred tools include ETABS, SAP2000, , or equ...

The attached survey shows an irregularly shaped plot that must host a five-bedroom residence, each bedroom with its own bath, plus a generous lounge, family kitchen and an internal staircase. Cross-ventilation comes first, with space-efficiency and abundant daylight woven into every decision. Concrete and steel will be the primary construction materials, but I’m open to modern, contemporary or even subtly traditional expressions so long as the result is practical and cost-effective. Scope of work • Concept stage: provide two-to-three layout options that resolve the awkward geometry, highlight air paths and daylight strategies, and indicate basic massing. • Design development: refine the chosen scheme into fully dimensioned floor plans, elevations, sections and coord...

I need a thorough foundation inspection for a residential property where a contractor has cut away part of the foundation. Requirements: - Assess the stability of the remaining foundation. - Check for any hidden issues not visible on the surface. - Provide a detailed report with any recommendations if necessary. Ideal skills and experience: - Licensed structural engineer or foundation specialist. - Experience with residential foundation assessments. - Ability to provide a detailed, professional report.

Task Description: Design of Hallway Extension We would like assistance in designing an extension of our existing hallway so that it harmonizes with the current building, both functionally and aesthetically. Since the construction is quite simple we do not need construction drawings but are looking for design and function. But we need measurements. At present, the hallway leads directly into two bedrooms, which is not ideal for guests. Our goal is to create a new entrance area by extending the hallway, improving privacy and circulation within the house. Key requirements and considerations: Entrance alignment and visibility: The entrance to the new extension should be aligned with the current front door. This alignment is important because there is a fireplace in the existing hallway tha...

I'm seeking a skilled landscaper to create a modern backyard design. The design should include: - Outdoor seating areas - Lighting elements - Fireplace - Pergola - Outdoor kitchen Ideal candidates should have experience in modern landscaping and a strong portfolio showcasing similar projects.

I need a comprehensive light study on my building's exterior lighting to ensure compliance with local building codes. This study will help identify any potential issues and recommend necessary adjustments. Key requirements: - Assess current exterior lighting setup - Identify compliance gaps with local building codes - Provide detailed report with recommendations for adjustments Ideal skills and experience: - Knowledge of local building codes - Experience with lighting design or assessments - Strong analytical skills and attention to detail

I’m preparing a full interior fit-out for a commercial facility that includes open-plan office areas, several conference rooms, plus the lobby and reception zone. The look I’m after is modern and minimalist—clean lines, neutral tones, functional finishes, and subtle tech-friendly details that keep the space uncluttered yet professional. What I need right now is solid back-of-house documentation and guidance so construction can run smoothly and costs stay predictable. Your main task will be to translate the concept into a clear Bill of Quantities and a phased implementation plan that contractors can price and build against without ambiguity. Deliverables I expect: • Detailed BOQ broken down by trade, material, and labour for the offices, meeting rooms, lobby, and re...

I’m transforming a quiet corner of my home into a modern, minimalist koi pond dedicated to relaxation and meditation, and I need a designer who has already tackled residential ponds within India’s climate and construction norms. The vision is clean lines rather than ornate stonework, yet it must feel alive—gently moving water, soft illumination after dusk, and subtle greenery floating at the surface. To achieve that, I want: • A sculptural waterfall or fountain that offers a calming sound without overpowering conversation • Discreet underwater lighting positioned for evening ambience and fish wellbeing • Select floating plants that complement the minimalist aesthetic while aiding water quality Please include in your proposal: &b...

Good day, I have a basic pencil sketch of my house plan, I need help with converting that into a CAD file for further processing. if you can also provide structural drawings then that's a plus - please mention what you charge for structural designs ready to start freelancers preferred Thanks

I’m running a live construction project and the Primavera P6 schedule now needs a careful refresh. The work is already in the execution phase, so I’m looking for someone who can jump straight into the current .xer file, bring every activity up to date, and make sure the plan fully reflects what is happening on-site. Here’s what I need you to tackle: • Updating timelines – insert the latest progress, adjust remaining durations, and realign milestones so float and critical paths are accurate. • Resource allocation – re-level labour, equipment, and subcontractor usage to avoid overloads or idle time while keeping cost codes intact. • Risk management – review the existing risk register in P6, add new field risks we’ve identified, ...

I need a detailed structural assessment of the foundation of a residential building. The primary issue is bowing, which requires immediate attention and a general structural review of the vacant building as it sits to verify structural safety. Key requirements: - Experienced structural engineer - Expertise in diagnosing foundation issues - Provide a comprehensive report with recommendations Ideal skills: - Structural engineering background - Knowledge of residential construction - Strong analytical and reporting skills

I regularly handle commercial projects and need a reliable electrical estimator who can open my PDF drawing sets in Bluebeam, extract the quantities, and deliver a polished bill of quantities that I can price and send a quote straight to builders Here’s what I expect on every package you return to me: • Clear labor-cost breakdowns tied to each line item • A separate sheet listing the exact quantity of every symbol counted (lights, outlets, switches, data points, etc.) • All formulas left visible so I can trace your logic if a client has questions - Underground lengths and submains lengths I’ll supply the drawings, scope notes, and any addenda. Turnaround is usually three business days, but let me know if a larger set needs more time—communication...

I'm seeking a qualified structural engineer to assist with rebuilding decks on a 40-year-old beach condo. Your expertise is crucial for ensuring safety, compliance, and structural integrity. Key Responsibilities: - Conduct thorough inspection and analysis of current deck structures - Provide code compliance review to meet local building codes - Suggest and confirm approach for rebuilding Ideal Skills and Experience: - Licensed structural engineer - Extensive experience with renovation of older buildings - In-depth knowledge of local building codes and regulations - Strong analytical and problem-solving skills Please provide a detailed plan and ensure all work meets local regulations.

We require a detailed draftsperson to prepare full working drawings for a compact, single-storey residential project (approx. 55–62 m²) in Northern Suburbs of Perth, WA. All drawings must comply with Australian and local building standards and be suitable for certification and building permit lodgement—including Surveyor CDC approval where required. Comprehensive working drawings, including (but not limited to): site plan, floor plan, elevations, sections, electrical layout, and other documentation necessary for a CDC application. All plans must meet the City's building permit regulations and Australian construction codes. preferably you would have examples of similar projects in Perth or Western Australia. Full details will be provided upon engagement and further...

I am looking for someone to have a look at some land and see and design what is likely to be passed for planning permission or change of usage. Residential or industrial. It is close to listed buildings and has previously been rejected for a bungalow many years ago.

I’m ready to move from architectural concepts to permit-ready documents for a new, wood-framed single-family home in Washington State. To do that, I need a structural engineer who is currently licensed in WA and familiar with the 2021 IBC/IRC as adopted locally. You’ll start with my near-complete architectural drawings, design all gravity and lateral systems for a wood structure, and package the engineering so the county reviewer can approve it on the first pass. Western Washington, Clallam County, wind, snow, and seismic (typically Cat. D) loads must be addressed, along with any portal-frame or narrow-wall situations the plan requires. Deliverables • Signed and stamped structural drawings (PDF + CAD) • Calculations book covering gravity, wind, and seismic analyse...

Necesito un diseño completo para un asador de estilo moderno que se integrará en el patio de mi casa. El cuerpo principal debe construirse en ladrillo, manteniendo líneas limpias y contemporáneas que combinen con el resto de la fachada. El proyecto debe incluir: • Parrilla de carbón incorporada y optimizada para flujo de aire. • Área de bar contigua con espacio para taburetes y superficie de trabajo impermeable. • Módulos de almacenamiento para utensilios, carbón y suministros, discretamente integrados en el frente del asador. Entrego las dimensiones del espacio y fotografías del entorno una vez iniciado el trabajo; con ello espero: 1. Planos constructivos detallados (plantas, alzados y secciones). 1. ...

I have a complete set of architectural and MEP drawings for a new Physical Therapy / GYM facility in West Columbia, Texas and I need them professionally sealed by a Texas-licensed PE. Before stamping, the Mechanical, Electrical, and Plumbing sheets must be reviewed, corrected where necessary, and brought fully in line with local code so I can submit for a building permit without delay. Scope • Mechanical – confirm HVAC load calcs, equipment schedules, duct / diffuser sizing, and ventilation rates. • Electrical – verify panel schedules, circuiting, conduit sizing, and egress / exterior lighting per NEC and local amendments. • Plumbing – check potable, waste, and vent sizing, fixture counts, and water heater specification for IPC/Texas compliance. All...

I need a comprehensive design review for a house addition. The key concern is whether to scrape the existing structure and start anew or to add on to the current design. Requirements: - Evaluate the current design and provide insights on aesthetics and functionality. - Compare the benefits and drawbacks of a complete redesign versus an addition. - Provide a detailed project proposal. Ideal Skills: - Strong background in architectural design. - Experience with residential additions and remodels. - Excellent analytical skills to assess current structures.

I need a professional to evaluate broken roof trusses damaged by a tree for insurance purposes. Requirements include: - Use existing photos (JPEG format) to assess damage - Provide detailed damage documentation for insurance claims Ideal Skills & Experience: - Experience with structural damage assessments - Knowledge of roof truss systems - Familiarity with insurance documentation processes

I’m ready to transform my backyard into a warm, traditional retreat and I need someone who can guide the process from concept sketches through final construction. The must-have centerpiece is a 24-foot round above-ground swimming pool; the surrounding hardscape should be a concrete patio that blends comfortably with a classic, timeless look. Alongside the pool and patio, I’d like three integrated features built right in: a fire pit for cool nights, an outdoor kitchen for easy entertaining, and a pergola to create a shaded sitting area. Space planning is important because the yard isn’t huge, so I’ll rely on you to balance clear circulation paths, safety zones around the pool, and enough room for seating and cooking. What I need from you • Scaled design drawin...

I need a licensed surveyor or architect to come on site and capture the exact span length and width of an existing bridge. The structure is standing and accessible; however, I have no recent dimensional data and must rely on your precise field measurements to move forward with my planning. The core of the job is straightforward: verify and document the clear distance between abutments as well as the overall deck width. If you can also advise on other parameters—such as load capacity or material thickness—let me know, but those are optional at this stage. Please bring your own equipment (total station, laser scanner, or similar), supply raw measurement files plus a concise PDF report, and include a simple CAD or annotated drawing that shows where each dimension was taken. Accu...

I'm seeking a detailed QS to do a cost breakdown for the villa project that has just started This breakdown will help in budgeting and financial planning. Key Requirements: - Itemized costs for labor, materials, and equipment - Cost estimates for each stage of construction - Insights on potential cost overruns or savings Ideal Skills and Experience: - Background in construction management - Experience with residential villa projects - Strong analytical skills and attention to detail - Proficiency in cost estimation software or tools

We require someone to create professional to-scale architectural diagrams and blueprints. This is the building: We require changes to the external of the building including floor heights as well as internal floor plans. If you're read this and looked at the maps building, and your price is an accurate price for the project, start your proposal with the word 'Coconut'.

I am looking for an expert in MEP drafting and coordination to update and refine my Mechanical, Electrical, and Plumbing layouts. This project requires an in-depth understanding of the latest equipment, code requirements, and routing modifications to deliver an integrated MEP design that is free of clashes. - Conduct a detailed review of existing MEP layouts against new equipment specifications, route changes, and updated codes - Manage the coordination process between the mechanical, electrical, and plumbing designs to ensure a harmonious, clash-free integration - Produce clean, layered DWG files for future modifications and archiving - Provide ready-to-print PDF files for immediate use in project meetings and reviews - Maintain open and clear communication to adhere to project specifica...

Job Description This project is intended for construction and authority approvals. All drawings must be suitable for contractor handover and execution. We are seeking a highly experienced commercial interior designer or architect to deliver a fully execution-ready interior and exterior design package for a specialty coffee shop. The scope includes interior spaces, outdoor seating areas, façade design, restrooms, and a closed preparation kitchen. This is a construction-focused project, not a conceptual or visualization-only assignment. Only designers with proven experience in specialty cafés or commercial hospitality projects should apply. ⸻ Scope of Work (Strict and Mandatory) Concept Design • Develop a clear, professional design concept for a specialty coffee s...

looking for an experienced BIM MEP freelancer to develop a complete MEP BIM model and perform clash detection and coordination within a 2-day timeframe. The scope of work includes creating discipline-wise BIM models in Autodesk Revit, integrating them, and performing clash detection using Navisworks, along with BIM 360 collaboration setup. Scope of Work HVAC Modeling Ductwork, equipment, accessories Proper levels, systems, and naming conventions Electrical Modeling Lighting, power, cable trays, panels (as per standard BIM practice) Plumbing Modeling Water supply, drainage, fixtures, piping systems Firefighting Modeling Sprinklers, piping, valves, pumps (basic LOD suitable for coordination) Coordination & Clash Detection Combine all MEP models Perform clash detection in Na...