Create a POC Project which use Electromagnets to move Spheres

Geschlossen Veröffentlicht vor 7 Jahren Bezahlt bei Lieferung
Geschlossen Bezahlt bei Lieferung

There should be two spheres of same size. The Sphere should be hollow and made of thin plastic or iron sheet. Electromagnets should be placed

around whole boundary of spheres from inside of sphere. An example of how Electromagnets may look like can be seen in attached pic. These

Electroamagnets are to be controlled through commands from Computer. Computer and spheres must be connected wirelessly.

One of the Sphere will be stationary. It will be fixed to a base Board. The Other Sphere must be able to move all around here with the help of

Electromagnets. Please check the attached pic MP.jpg. Lets call the fixed Sphere as stationary sphere and movable one as movable sphere for rest

of description.

Coordination Between Spheres: When the system is started. One electromagnet from each sphere should be ON. Both Spheres should be in contact with

each other at that point as shown in attached pic MP.jpg. Afterwards to move movable sphere on stationary one. The nearby electromagnets on each

sphere shown by pink color must be made ON. The previous Electromagnets which were made ON at Start should go off now. So that movable sphere

should now be in contact with stationary Sphere at new Join Point shown in pink color. Afterwards as per command from Computer the Spheres should

join at joinpoints shown in green colors in [url removed, login to view] and so on. Controlling and Commanding these join points, the movable Sphere should move around

on Stationary Sphere on commands from Computer.

WE can use arduino or Raspberry or any board to realize the project.

For powering System and Electromagnets in sphere. We can use small batteries inside the sphere. But if it increases too much weight of sphere

making hindering its movement. We can put battery outside connected and powering Sphere through wire.

But we must try our best to put batteries inside Sphere.

Conditions for Successfull Project:

1) The Movable sphere should be movable around stationary Sphere with the help on Electromagnets only.

2) The movement should be programable through Commands from Computer.

3) The commands must be sent wirelessly from Computer to Spheres.

4) There should be atleast 12 mini electromagnets per sphere.

5) The Sphere should be movable atleast for a minute around the stationary one. With each joinpoint lasting at max for 1 second.

6) The program and procedure to change programable movement must be shared with Sponsor.

7) All the schematics, parts used and procedure used to create project must be shared with Sponsor.

Elektrotechnik Elektronik Drahtlos

Projekt-ID: #10255169

Über das Projekt

2 Vorschläge Remote Projekt Aktiv vor 7 Jahren

2 Freelancer bieten im Durchschnitt $708 für diesen Job

riki888vw

Hi, I have experience in Arduino developing and complex algorithms programming. I have questions for your project: - if both spheres are on table? - can you illustrate movement trajectory from red to blue points? W Mehr

$750 USD in 30 Tagen
(8 Bewertungen)
5.0
Sushma1905

A proposal has not yet been provided

$666 USD in 10 Tagen
(0 Bewertungen)
0.0