In Bearbeitung

Design thermal system 1 question

When a single refrigerant condenses and evaporates at a constant pressure between saturated liquid and saturated vapor, the temperature remains constant. A binary solution, on the other hand, experiences a change in temperature, as pointed in Chap. 5. When a refrigeration system cools a fluid stream through a large temperature as it passes through the condenser, it may be possible to conserve compression power by using a binary solution. Some applications of this concept have been made in the cryogenic and petrochemical industries.

The refrigeration cycle adaptable to refrigerant mixtures employs the usual components (compressor, condenser, evaporator, and expansion device) and a heat exchanger as well, as shown in Fig. A-13. A mixture of refrigerants R-12 and R-114 will be explored.


5 kW/K evaporator

UA= 5 kW/K condenser

0.3 kW/k heat exchanger

The condenser is water-cooled; water enters at 25°C with a flow rate of 0.8 kg/s.

The evaporator fluid is cooled from -15 to -25°C. Its flow rate is 0.57 kg/s, and its specific heat is 3.5 kJ/(kg.K).

The refrigerant is saturated liquid at point 3 and saturated vapor at point 1.

The compressor has adjustable capacity which is regulated to provide the specified refrigeration rate in the evaporator.

For saturated pressure

R-12 lnp= 14.861-2498.3/T

R-114 lnp= 15.407-2993.2/T

Where p = pressure, kPa

T= temperature, K

For enthalpy of saturated liquid

200 + [url removed, login to view] + [url removed, login to view] R-12

hf =

200 + [url removed, login to view] + [url removed, login to view] R-114

Where hf = enthalpy of liquid, kJ/kg,

t = temperature, °C

For enthalpy of saturated vapor

351.5 + [url removed, login to view] [url removed, login to view] R-12


337.4 + [url removed, login to view] – [url removed, login to view] R-114

where hg = enthalpy of saturated vapor, kJ/kg

t = temperature. °C

Work of compression

∆h={█(188 (1-(14.861-ln⁡〖p_2 〗)/(14.861-ln⁡〖p_1 〗 )) R-12@ 158 (1-(15.407-ln⁡〖p_2 〗)/(15.407-ln⁡〖p_1 〗 )) R-114)┤

Where ∆h = work of compression, kJ/kg

p2 = discharge pressure (total pressure), kPa

p1 = suction pressure (total pressure), kPa

When compressing a mixture, the work of compression is found by proportioning according to the mass fraction of the constituents in the mixture. The mixture is assumed to be ideal, and Dalton’s and Raoult’s laws apply. The molecular weights of R-12 and R-114 are 120.93 and 170.94, respectively.

Because the pressure changes as the refrigerant flows through the pipeline, the density and velocity also change. Account for the pressure drop in all pipes if the length from the compressor to the throttling device is 10 m (one way). The pipe cost in dollars per meter length is 300 D1.6, where D is the pipe diameter in meters.


For the specified refrigeration duty (approximately 20kW), determine the composition of the mixture that results in minimum power requirements at the compressor.

Required in 1 day.......

Only experience freelancer bid dont waste my time

Fähigkeiten: Ingenieurwesen, Maschinenbauwesen

Mehr darüber work ua, waste industries, thermal design power, the design cycle, system requirements for freelancer, system one freelancer, single system design, r.k. mechanical, power of the freelancer, minimum-cost flow, minimum cost flow, mechanical engineering cost, mechanical design 1, mass design, it engineering freelancer, is freelancer saturated, industries design, ideal industries, h&r freelancer, freelancer where to apply, freelancer water, freelancer question, freelancer power engineering, freelancer on r&d, freelancer mechanical

Über den Arbeitgeber:
( 9 Bewertungen ) Karachi, Pakistan

Projekt-ID: #6885196

Vergeben an:


A proposal has not yet been provided

$17 USD in 2 Tagen
(0 Bewertungen)

7 Freelancer bieten im Durchschnitt $47 für diesen Job


A highly experienced Mechanical Engineer with years of invaluable experience and completing projects from conception to completion with 100% accuracy, dedication and quality. Expert in refrigeration and air conditio Mehr

$60 USD in 1 Tag
(47 Bewertungen)

A proposal has not yet been provided

$55 USD in 1 Tag
(13 Bewertungen)

I have good experience of solving problems related to hvac. I will do your project in 2 days. If you wanna hire my services contact me at earliest. Regards, Engr Muhammad Arif.

$67 USD in 2 Tagen
(8 Bewertungen)

Đề xuất vẫn chưa được gửi

$55 USD in 1 Tag
(0 Bewertungen)

Dear Sir, I am expert in mechanical engineering. I am interested to do your work. I have 15 years experience in mechanical engineering. I am new in So I need feedback not money. I will do all my best Mehr

$40 USD in 1 Tag
(0 Bewertungen)

why do you need to use conbination of these two refrigerants in mixture? anyway, changing it leads to different temperature glide in evaporator. have you considered to use brand new refrigerant type HMO R1234yf. ? is Mehr

$35 USD in 15 Tagen
(0 Bewertungen)