Find Jobs
Hire Freelancers

ASA 5515X Dynamic PAT Configuration assistance.

$30-250 AUD

Abgesagt
Veröffentlicht vor mehr als 9 Jahren

$30-250 AUD

Bezahlt bei Lieferung
Using software versions: Cisco Adaptive Security Appliance Software Version 9.2(2) Device Manager Version 7.2(2) Description: 2 x ASA5515X with above software ver running in Active/Standby High Availability and Dual ISP/Internet Feeds. (refered to as Outside_Primary and Outside_Secondary) The active/standby configuration is working properly, however having issues with Dynamic PAT when failing over to second ISP. The nat rule is set to nat any inside address behing Outside_Primary and that works fine. Problem is when failover to Outside_Secondary happens, i believe it is still trying to nat behind outside_primary. We need some sort of NAT/Dynamic PAT failover so that when failover happens, it is NAT/PAT'ing behind the correct interface. Note the software version is 9.2(2). Please do not contact with assistance or configuration for earlier versions.
Projekt-ID: 6170323

Über das Projekt

20 Vorschläge
Remote Projekt
Aktiv vor 10 Jahren

Möchten Sie etwas Geld verdienen?

Vorteile einer Ausschreibung auf Freelancer

Legen Sie Ihr Budget und Ihren Zeitrahmen fest
Für Ihre Arbeit bezahlt werden
Skizzieren Sie Ihren Vorschlag
Sie können sich kostenlos anmelden und auf Aufträge bieten
20 Freelancer bieten im Durchschnitt $123 AUD für diesen Auftrag
Avatar des Nutzers
Hello, I am a network security engineer spcializing in Cisco ASA's Connect with me on skype - packetscaper to discuss your project in detail
$100 AUD in 1 Tag
4,9 (22 Bewertungen)
4,7
4,7
Avatar des Nutzers
Hello, I am a CISCO Engineer and work currently for a CISCO Partner. I have a long experience with PIX/ ASA devices, I have done a lot of new projects this year with ASA HA Firewalls. In this case the problem is that ASA keeps the xlate table active on the first line. This can be fixed. Please consider my offer! Kind Regards, Ibra
$100 AUD in 1 Tag
5,0 (24 Bewertungen)
4,6
4,6
Avatar des Nutzers
Greetings of the day, I have read your requirements and can configure your network in few hours. I have Good Experience of working with Cisco Devices. If you want a sample of my work you can initiate a chat session and we can discuss things better. Thank You
$90 AUD in 3 Tagen
4,8 (19 Bewertungen)
4,3
4,3
Avatar des Nutzers
Greetings, As you specifed it is nat problem. If you are tracking primary interface and it fails, then it goes on the second interface while it still nats through first one. We can solve this in a matter of day. I hope we can work together, if not I wish you the very best. Best regards
$155 AUD in 3 Tagen
5,0 (8 Bewertungen)
3,6
3,6
Avatar des Nutzers
We are can take care of this problem by multiple ways depending on your requirement and resource availability. first and best approach is to use BGP, so that you don't have to worry about doing the multiple NATing. the second approach will be to create duplicate Nating for each interface. so that which ever interface is active it can take care of it.
$125 AUD in 3 Tagen
5,0 (3 Bewertungen)
3,1
3,1
Avatar des Nutzers
I am a highly talented Network Consultant looking forward to be hired by you. I have a strong technical knowledge and experience in the areas of routing, switching, networks security and wireless. I am CCIE certified and in my career I have also worked as a Systems Engineer so I possess strong skills in this areas like server virtualization, server management and scripting. When given this opportunity I will be a great asset for your company. I look forward to being hired by you.
$100 AUD in 3 Tagen
5,0 (2 Bewertungen)
2,8
2,8
Avatar des Nutzers
Hi, My name is Randy , I am a Cisco network engineer with experience at the CISCO Technical support background. I primarily working with Cisco ASA VPN/SECURITY infrastructure , but also can handle cisco routers , voice configs, APs config , nexus , T1/E1 conecctions and routing protocols as RIP , EIGRP , BGP , IS-IS ,OSPF, also have some expiernece with juniper and sonicwall devices. Any question let me know, Have a nice day ! : )
$55 AUD in 1 Tag
5,0 (6 Bewertungen)
2,3
2,3
Avatar des Nutzers
i have more than 5 years experience of Network Security and Routing & Switching. specially Cisco ASA with IS 8.3 and above also security devices like WSA, ISE ACS etc.
$155 AUD in 3 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
Cisco CCNA Security Certified, able to and certified to complete this request, send config with passwords removed and I will configure for you.
$222 AUD in 2 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
My opinion is that probably the default-route is not changing to the backup link when primary is not available, and so the NAT applied is still the primary. By configuring a monitoring service inside the ASA the default-route can be dinamically changed when necessary, and as well roll-back automatically when primary link come back up.
$122 AUD in 1 Tag
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
Certifications:  CISCO CCNP Routing & Switching Certified  CISCO CCNP wireless Certified  CISCO CCNA certified (Cisco Academy-American University in Cairo(AUC)  Cisco CCNA Security Certified  Cisco CCNA Voice Certified  Cisco CCNP (Security Firewall) (642-618)  F5 BIG-IP Local Traffic Management (F50-531)  CISCO Cvoice v.6 Certified  QoS v.6 certified  Juniper Networks Certified Internet Associate (JN0-101)  CISCO Advanced Routing & Switching Field Engineer (ARSFE) (642-067)  CISCO Wide Area Application Services (WAAS) (642-655) Job Resbonsibilities:  Configuration of IP networks including IP Routing protocols EIGRP, ISIS, OSPF, BGP, and QoS operation and deployment.  Perform design, installation, configuration, and support of LAN/WAN hardware and software including Cisco Routers, and Switches.  Perform design, network migration plans, acceptance test plans, proof of concept plan and network documentations.  Responsible for wireless projects (site survey, offline planning, WLAN design & implementation).  Installation, configuration, and troubleshooting experiences in operating Cisco Routers several models, and deployment and configuration for Cisco layer two and multilayer switches.  Installation of WAN serial links E3's, E1's, and HDSL lines, and good experiences in troubleshooting links failure.  Configuration of Cisco Firewalls (ASA) CLI, hardware, and software architectures and operation.  Prior experience in working in an IP network operations envi
$144 AUD in 1 Tag
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
I can help you troubleshoot this issue. Description: 2 x ASA5515X with above software ver running in Active/Standby High Availability and Dual ISP/Internet Feeds. (refered to as Outside_Primary and Outside_Secondary) The active/standby configuration is working properly, however having issues with Dynamic PAT when failing over to second ISP. The nat rule is set to nat any inside address behing Outside_Primary and that works fine. Problem is when failover to Outside_Secondary happens, i believe it is still trying to nat behind outside_primary. We need some sort of NAT/Dynamic PAT failover so that when failover happens, it is NAT/PAT'ing behind the correct interface. Note the software version is 9.2(2). Please do not contact with assistance or configuration for earlier versions.
$120 AUD in 2 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
A proposal has not yet been provided
$83 AUD in 3 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
I am a CCIE Security and can help u in ur project. Can deliver very fast. Please contact in case any sort of clarification is needed.
$88 AUD in 2 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
Hello, I would definitely be able to help you with this project. I have significant experience in managing Cisco Firewalls across for managed security service providers. With Dual ISP setup with ASA, I have usually seen issues with track configurations and/or network design layout to two ISPs. I would we more than happy to have a introductory Skype session. I can be reached on prats84. Pratik
$135 AUD in 3 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
I currently work as a Cisco ASA and security engineer for a large consulting company who manages over 400 clients. I have configured ASA’s for the large financial companies around New York City and am well trained and experiencing in ALL ASA features. I also work very quickly and efficiently, testing all features before deployment.
$160 AUD in 3 Tagen
0,0 (0 Bewertungen)
0,0
0,0

Über den Kunden

Flagge von AUSTRALIA
Robina, Australia
4,8
9
Zahlungsmethode verifiziert
Mitglied seit Juni 16, 2008

Kundenüberprüfung

Danke! Wir haben Ihnen per E-Mail einen Link geschickt, über den Sie Ihr kostenloses Guthaben anfordern können.
Beim Senden Ihrer E-Mail ist ein Fehler aufgetreten. Bitte versuchen Sie es erneut.
Registrierte Benutzer Veröffentlichte Jobs
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Vorschau wird geladen
Erlaubnis zur Geolokalisierung erteilt.
Ihre Anmeldesitzung ist abgelaufen und Sie wurden abgemeldet. Bitte melden Sie sich erneut an.