Copadata Zenon Energy Project

@hayteekeys

Hi, KINDLY READ THROUGH MY PROPOSAL, I can take your Zenon system from an empty workspace to a ready‑to‑run energy‑management project. I have done several EMS , and i can send some of them to you upon request for you to check MY APPROACH - Project structure: - Create a clean Zenon project with hierarchy for sites/feeders/assets, tag groups, and screen sets tailored to energy use cases. - Communications: - Configure drivers and channels for IEC 61850, Modbus TCP, IEC 60870‑5‑104 (as per your devices). - Import/configure points, apply your tag naming rules, and verify live data acquisition. - HMI / UX: - Build concise operator views: single‑line or asset overviews, alarms/events, trends, and basic KPI dashboards (load, energy, power factor, etc.). -Documentation: - In‑project comments plus a short configuration note so future engineers can extend the project easily. WHAT I NEED FROM YOU TO START - Device list + protocols and IPs. - Tag naming convention and any KPIs you care about most. - Brand/UX guidelines (logos, colours, fonts) if available. With that, I can usually deliver an initial build in about 1–2 weeks, depending on device count and HMI complexity, then iterate once you’ve tested it on your side.

@AwaisChaudhry

Hello, I’m Muhammad Awais. I will take your Zenon Energy project from an empty workspace to a fully configured, ready-to-run solution. I will implement a clean Zenon project structure for energy management, with clear hierarchies, variables, and screen sets. I will configure communications to IEC 61850, Modbus TCP, IEC 60870-5-104, or similar, and verify reliable data acquisition from your field devices. I will design a compact operator interface with alarms, trending, and basic KPI dashboards so the system can run effectively from day one. I will provide concise in-project comments and documentation to ease future changes. Once you share device lists, tag naming conventions, and brand guidelines, I’ll align the project to those standards and deliver a rapid initial build. I have done Zenon project setups for energy facilities and can outline a realistic turnaround and the exact information I need to begin. Which field devices and interfaces will be in scope, and are there any gateways required for IEC 61850, Modbus TCP, or IEC 60870-5-104? What are the target KPIs and alarm thresholds for the initial dashboards? Do you have specific tag naming conventions, asset hierarchies, and brand guidelines I should follow? What are the network and security constraints (VPN, firewall, remote access) for device connectivity and Zenon server setup? What is the expected timeline for the initial build, acceptance criteria, and sign-off, and what information will you provide to start?

@fawadazeem1

i am PhD in electrical engineering with a number of completed projects in SCADA and energy management. I have delivered Zenon projects from a blank setup to a stable, ready-to-use system for power and renewable energy facilities. I will create a clean Zenon project structure, configure reliable communication using IEC 61850, Modbus TCP, or IEC 60870-5-104, and develop a simple, practical operator interface with alarms, trends, and key energy KPIs. The focus will be on usability, performance, and easy future expansion. Clear variable descriptions, in-project comments, and brief documentation will be included to ensure maintainability. An initial working version can typically be delivered within 5–7 working days. Before starting, I would like to confirm: Estimated number of devices/tags Required communication protocols Any predefined KPIs or alarm priorities Whether this will be reused for multiple sites Looking forward to collaborating on this project.

@geoker6

Hey there, Trust all is well. While I haven't done an energy project with Zenon, I did attend a Zenon copa data training. I'm also an experienced electrical and automation engineer in water and waste water treatment. Kindly contact me to discuss further details. Best Regards,

@redbrickamerica

Hello! We are prepared to transform an empty workspace into a fully functional Zenon energy-management solution. With expertise in PLC & SCADA and Electrical Engineering, we'll craft a customized Zenon project structure, establish communication channels to standard field devices, and design an intuitive operator interface with alarms and KPI dashboards. Our experience ensures reliable data acquisition and future-proof documentation for easy modifications. Let's kick-start this project swiftly and efficiently. How soon can we commence the initial build, and what details do you require?

@adily1

Hi, There, I understand you're looking for a comprehensive solution to transform an empty workspace into a fully configured, ready-to-run Zenon project for energy management. My expertise aligns perfectly with your requirements, ensuring a structured project tailored for seamless communication with various standard field devices and an intuitive operator interface with essential functionalities. I'm Adil Yousuf, and I bring over 6 years of experience in PLC & SCADA, along with in-depth knowledge of Electrical Engineering. My previous work includes designing and configuring Zenon projects, ensuring reliable data acquisition and user-friendly interfaces. Please take a moment to review my portfolio here: https://www.freelancer.com/u/adily1 I'm eager to discuss the turnaround time for the initial build and the specific information needed from you to kick-start the project. Thank you for considering my proposal. Regards, Adil Yousuf

@gridbits

Hi, we are a group of engineers who are mainly working in automation systems for utility and oil and gas we are providing full engineering remote services for our customers including and not limited to Documentation - System architecture diagram - IP address list - Cable list for provided system - FDS document,.. and many more depending on your deliverable list Configuration - System configuration for many systems (Zenon, DsAgile, EcoSUi,..) based on IEC61850, Modbus, DNP3, .. - Relays CID files. - Gateway configuration. - Remote support for troubleshooting...etc Depending on your inputs like (SLD, signal list , project specifications) we can show you many of previous completed projects. so, you can consider us as remote support office for you. BR Gridbits

@joaquinc48

Hello, I have experience developing Zenon projects from scratch for energy-management applications, including hierarchical variable structures, screen sets, alarms, trending, and KPI dashboards. I’ve configured communication with IEC 61850, Modbus TCP, and IEC 60870-5-104 devices, ensuring reliable real-time data acquisition and clear operator interfaces. My approach is to structure the project for maintainability, map all devices to standardized tags, implement intuitive dashboards, and provide embedded documentation and comments for straightforward future modifications. A few technical questions: • Which devices/protocols will be the primary focus for initial integration? • Are there specific alarm priority or KPI calculation requirements? • Preferred layout/branding for the operator interface screens? Thanks

@oleksandrt68

Hello I’m an industrial automation engineer with proven experience building Copadata Zenon projects for energy-management systems. I’ve reviewed your requirement to take an empty workspace and deliver a fully structured, ready-to-run solution with reliable data acquisition, alarms, trends, and KPI dashboards. I can provide: • A clean, hierarchical Zenon project tailored to your energy facility use case • Communication configuration with IEC 61850, Modbus TCP, or IEC 60870-5-104 devices, fully tested for reliability • Operator screens with intuitive dashboards, alarms, and trends for immediate usability • Clear in-project documentation and comments for straightforward future updates With your device list and tag conventions, I can quickly build and deliver an initial tested version, ready for operational deployment.

@kenzol2

I am an experienced Zenon engineer with hands-on expertise in energy-management systems. I can set up a clean, modular project structure from scratch, configure communication with field devices via IEC 61850, Modbus TCP, and IEC 60870-5-104, and design operator screens with alarms, trending, and KPI dashboards. Documentation and in-project comments will make future edits straightforward. I can start immediately and would need device lists, tag conventions, and any branding guidelines to begin a reliable first build.

@reeses3

I specialize in building Zenon projects for energy facilities from the ground up. I will create a structured project hierarchy with variables and screens, configure communications to your field devices, and provide an operator interface ready to use with alarms, trending, and KPI displays. Clear documentation and annotated project comments are part of my deliverables. With the device list and naming conventions, I can provide a working prototype quickly and guide you through further expansions.

@lucianm5

I can take your Zenon project from an empty workspace to a fully functional energy-management solution. My services include clean project structure, communication setup to IEC 61850, Modbus TCP, IEC 60870-5-104 devices, and a simple yet functional operator interface with alarms and dashboards. I emphasize maintainable design and thorough documentation. Once I have your device lists, tag conventions, and brand guidance, I can deliver an initial build ready for immediate testing.

@callums57

I offer Zenon project setup services for energy-management applications. I will design a modular project architecture, implement communication to your field devices, and create operator screens with alarms, trends, and basic KPIs for immediate usability. My focus is on clean design, maintainability, and clear in-project documentation. With the device information and naming standards, I can deliver a first version quickly, ensuring all communications and displays work out of the box.