Find Jobs
Hire Freelancers

Microprocessor software

$250-750 USD

In Bearbeitung
Veröffentlicht vor mehr als 3 Jahren

$250-750 USD

Bezahlt bei Lieferung
Write a software for a Microchip PIC processor, according to the attached PDF "Software_functional_description". The code must be well commented in english. The Development should be done in Microchip's MPLab, and the result delivered as such a project. The code must be tested and verified on a special made prototype board, the prototype board must be manufactured by the Freelancer, all manufacturing files will be supplied by me. The project bid must include manufacturing cost for the prototype board, a BOM- for the board is attached in this project for cost estimation purposes. Manufacturing files will be supplied to the winning bidder.
Projekt-ID: 27444822

Über das Projekt

10 Vorschläge
Remote Projekt
Aktiv vor 4 Jahren

Möchten Sie etwas Geld verdienen?

Vorteile einer Ausschreibung auf Freelancer

Legen Sie Ihr Budget und Ihren Zeitrahmen fest
Für Ihre Arbeit bezahlt werden
Skizzieren Sie Ihren Vorschlag
Sie können sich kostenlos anmelden und auf Aufträge bieten
10 Freelancer bieten im Durchschnitt $728 USD für diesen Auftrag
Avatar des Nutzers
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs, CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for electrical vehicles ,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$1.000 USD in 21 Tagen
4,9 (61 Bewertungen)
6,9
6,9
Avatar des Nutzers
Hi there, We are a professional team in Embedded firmware development having prior experience in PIC controller. So development will be done in Microchip's MPLab. Kindly spare some time for the interview. We have already developed many electronic products:- GPS Controlled Relay Event status using CC1310 chip Prayer Watch Wireless Alarm System Power Bank Camera slider controller Wifi home automation Bulb with remote control Curtains with remote control Automatic flush control Smart watch for hajj We will be glad to hear from you! Regards, Intellisense Technology
$350 USD in 30 Tagen
5,0 (13 Bewertungen)
5,4
5,4
Avatar des Nutzers
General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, analog design, PCB design and microcontroller coding. My projects summary is attached. Please look them. If you look them you will see that I'm ideal person who can make your project without any problem. Some examples are attached. It shows my ability to make your project. Any questions you can ask me. We can talk details of your project by using SKYPe and Whatsapp. Please give me your SKYPE and mobile phone number. My SKYPE: makinmakin35 I can agree budget which you can pay. Please tell me your expected budget. Please give me your project. I promise that I will give good solution. Please respond to me. I hope you will select me. Have a good time Cheers Metin
$250 USD in 10 Tagen
4,7 (19 Bewertungen)
5,3
5,3
Avatar des Nutzers
Hi, I have 14 years experience in micro controller programming. I have worked with PIC16F877A,PIC18F452,PIC18F4550,..etc programming in MPLab IDE. May I know which PIC micro controller you are using. I can get the PCB board manufactured here with the design files you will provide. I can procure components and assemble it. We can discuss Regards Senthil Chennai,India
$1.250 USD in 45 Tagen
5,0 (11 Bewertungen)
4,8
4,8
Avatar des Nutzers
Hi I'm an Embedded hardware / firmware design engineer with 18 years experience: • Designing Industrial motor control and speed Drive • digital Power supply design for commercial and industrial sector • micro-controller programming with ARM-Cortex M4/7/33 and Cortex-R, Cortex-A7/A9 / Risc-V , MIPS32 • Real-Time Operating systems [SafeRTOS / FreeRTOS / QNX / Mbed] • track record PCB design using Cadence Allegro / Kicad / Altium • system design and components selection and interfaces • PCB Signal integrity and Power/Thermal analysis so I invite you to chat and exchange more details about your project and show you how my experience fits your project.
$500 USD in 15 Tagen
5,0 (5 Bewertungen)
4,1
4,1
Avatar des Nutzers
Ready to start the work on your project with immediate effect , we can discuss more over chat, thanks regards.
$500 USD in 7 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
Hi, Thanks for sharing the requirement. We are expertise in product design, development and Testing (Hardware Design, Digital logic design (CPLD and FPGA), Schematics Entry, PCB Layout design, Software, Firmware, Mechanical, - Product Life cycle - End to End support and product Regulatory certification like FCC, CE and so on. Share the detailed requirement specification for detailed discussion and clear understanding. Visit my profile in LinkedIn for more detail. Have good experience and Expert in Logic Design. Will be able to support and compete the task with little effort and complete the task in time. In IOT related projects, interfacing and communication with the Android app though the Bluetooth interface ion android mobile phone.. Thanks and Regards Lingaraj +91 9980733665
$750 USD in 45 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
Hi Dear, I would like to working for your project. I am currently working on ESP32 project which simultaneously sample 3 ADC channel and send this data to bluetooth. I have developed circuit in modular design that i can attach so many sensor boards. Code is under development, but it is already working as prototype. I mean that, i can handle your project, as well. I am familiar with Microchip PIC MCU. I am chasing the opportunity to work abroad. Regards,
$1.200 USD in 30 Tagen
0,0 (0 Bewertungen)
0,0
0,0
Avatar des Nutzers
I am very much interested in working with you. I have been working with this type of job for a couple of years now and I can assure you that I can do the job very well. Please kindly contact me for further details of the job so that I can start now. Thank you and stay safe! Electrical Engineer, Master of Electrical of Engineering , Bachelor of Mathematics , Experienced at both fields , looking forward jobs and can do multitask jobs in the parallel in the limited duration .
$500 USD in 2 Tagen
0,0 (0 Bewertungen)
0,0
0,0

Über den Kunden

Flagge von SWEDEN
Mora, Sweden
5,0
22
Zahlungsmethode verifiziert
Mitglied seit März 16, 2008

Kundenüberprüfung

Danke! Wir haben Ihnen per E-Mail einen Link geschickt, über den Sie Ihr kostenloses Guthaben anfordern können.
Beim Senden Ihrer E-Mail ist ein Fehler aufgetreten. Bitte versuchen Sie es erneut.
Registrierte Benutzer Veröffentlichte Jobs
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Vorschau wird geladen
Erlaubnis zur Geolokalisierung erteilt.
Ihre Anmeldesitzung ist abgelaufen und Sie wurden abgemeldet. Bitte melden Sie sich erneut an.