Sendmail dovecot centos Jobs
Bid only you are an expert in AW and centos. I have a WordPress e-commerce website hosted on AWS. task 1. Need to remove un-useful files 2. check some basic things
I have a CentOS server hosting a single website (Invision Power Board forum). After trying to upgrade the forum, I am getting errors with a missing MySQL tablespace. The physical file was missing. I have been trying to hack it together using backups/new files etc, but so far no luck. I need a MySQL expert to help me fix this issue ASAP. I expect this will be a very fast fix (minutes at most) for a true MySQL expert. If it goes over time, I will pay extra as a tip. Only bid on this if you can work on it immediately - within the hour. A very large public website is down and I do not have days to wait for someone :)
i got a centos server installed with PMTA already and setup email acc via vesta cp. I need a freelancer to help me setup round cube to receive and send email and also guide and provide me with the commands used in seting them up so that i can fix it myself in the future.
It is required the development of a Laravel project with which list all the files and folders in a directory mounted via SMB, NFS or located into a direct attached storage. Once defined a path (passed as param...must use the task scheduling methodology of Laravel () - the application must run with an Artisan command (no API, no Front-End, but only back-end) - the application must be fully compatible with Laravel 5.7.*, 6.*, 7.* and 8.* - the code must me clean, commented (in english), and indented with tabs - the application must work with Ubuntu 18, Ubuntu 20 and CentOS 7 - the deployment must be done with Git You can use the library tree v.1.7 () or develop from scratch with PHP/Laravel.
hi i bought new vps and installed plesk panel i already migrate all my websites from old to new vps now i changed ip address of my custom name server in domain panel for pointing with new ip but it stop working need to connect new vps with nameserver correctly
...a version control system. FRONTEND SKILLS Experience with the implementation of client-side technologies like AJAX, ECMAScript 6, JSX, HTML, Jquery and SCSS. Knowledge implementing frontend frameworks like REACT and JQuery. SYSTEMS ADMINISTRATION Use and configuration of Apache server environments. Knowledge using Linux systems and the command line interface. Configuration and maintenance of Centos Web Panel. Use of communication protocols like SSH and FTP. Administration and maintenance of postgres databases. TRANSVERSAL SKILLS Familiar with the use of Jira (Kanban / SCRUM). Proficient / Superior understanding of English with excellent communication skills. Self-motivated Enthusiasm investigating and participating in continuous learning processes. Attention to detail. IMPORT...
Optimisation and updating Centos server on a VPN. Disk space to be optimised, The application is only around 25 GB, back up to GDrive checked and old backups deleted. The webserver seem to be not available from time to time and keep getting Server not available error. I want to ensure the server is available all the time. All un necessary ports must be closed and firewalls checked.
I will send you server credintials, you need to install pgsql and pgadmin on centos server.
I have Vtiger 7 CRM, previously we had to use asterisk PBX installation for the specific setup but due to the inactive time period of the business, existing PBX settings are no longer exist. we did install issabel Asterix into another centos machine. since we already have all installations for both issabel Asterix and vtiger, and they are both in working conditions and vtiger already has the related module for its own... it should to be taken only 1 hour for a guy who has previous experience on the task... (both voip calls and vtiger are in working condition) What I want: -CRM Users should able to use "click to call" dialing options for making outgoing calls right from Vtiger CRM by clicking on the numbers. -Instant pop-up alerts for incoming calls displaying the cont...
I have my existing website and platform written in ruby on rails, deployed on aws and having centos machine. I need to completely revamp the same in React.js on frontend and node.js on backend and need to deploy using docker and automate using jenkins. Please ping, only if you have knowledge of all the mentioned tech stack as already my time got wasted. The budget will be atmost $350-400.
hi i bought new vps and installed plesk panel i already migrate all my websites from old to new vps now i changed ip address of my custom name server in domain panel for pointing with new ip but it stop working need to connect new vps with nameserver correctly
to clear server error by installing the ssl as autossl is not working in cwp and centos
We need an expert FreeSWITCH (FS) Application Developer for our Call and Omnichannel Contact Center project to help us to develop and integrate our web app with FS platform. . Requirement: Linux CentOS atau Oracle Programming Skills: ASP Net MVC Net Core 3.1 Javascript, JQuery, CSS
Estimated 40-50 hours of development time to build integration of our application with RouteOne DSP. The right person for the project will have excellent skills in the following: LAMP Stack developer PHP SOAP Certificate based authentication XML API – site to site integrations Linux – CentOS 7
Hi we think that our setup maybe not optimal on our cloudlinux VPS server. the hyper-v host have plenty of ressources backed by SSDs and we see some site been slow even with LVE set to unlimited. we understand that some wordpress can be the cause themself with the script but we would like someone to take 1 hours to improve setting in the Centos and WHM to make sure nothing is not properly set. thank you
I have my existing website written in ruby on rails, deployed on aws and having centos machine. I need to completely revamp the same in React.js on frontend and node.js on backend and need to deploy using docker. Please ping, only if you have knowledge of all the mentioned tech stack as already my time got wasted. The budget will be atmost $350-400.
we need centos and CWP ( CENTOS WEB PANEL ) experience dveloper to install cwp on cento7 server with out any issues and it should work perfectly with our domain and emails ! must start now and through anydesk ! maximum budget : 10$ as it's simple task for some one knows what he is doing
This is maybe 20 lines of code. I am not interested in or any other site,...that require large numbers of dependancies including node.js, no python. I automatically do not chat with anyone that auto bids as most are trying to capture everything without reading and that is a waste of my time. I need a simple C/C++ example that extracts the upload/latency (and if there are other details) from the netflix speed test site. The completed code must run on Linux like Centos and of course, I will need the source code. I need the output to be simple text, nothing fancy, no graphics, just plain text echos to the console. If you don't know about this already, there is no point in bidding because you will be doing the same as we've had to, searching the Internet to find nothing.
Servers (CentOS and Ubuntu) will be provided for the right person. Connect freeswitch to astpp server, add a vendor and pass calls. You document all so that anyone with minimal tech knowledge can take the document, follow each step there and get the same results (freeswitch + astpp installed, freeswitch connected to astpp, calls route via a vendor). Then I will consider the project is done and it will be paid. Otherwise if we can not repeat the same from our side, the project is not considered as done and will not be paid. Please confirm, that all details of the project are clear we could go forward. Thanks.
I have my existing website written in ruby on rails, deployed on aws and having centos machine. I need to completely revamp the same in React.js on frontend and node.js on backend and need to deploy using docker. Please ping, only if you have knowledge of all the mentioned tech stack as already my time got wasted. The budget will be atmost $280-$300
I'm looking for someone that is willing to answer questions that I have about Asterisk / FreePBX configurat...be well-versed in Asterisk, Linux, SSH, SIP, etc. For example, voicemail email notifications are being sent from asterisk[at] and my spam filter does not like that. I tried editing the config via FreePBX >> Voicemail Admin, but it's till not working. So I need help getting that fixed and maybe setting up the proper DNS records for it to use one of my FQDN's. Note: My distro uses Sendmail and I think Postfix would be better. Note: If we decide to proceed with this job via your Freelancer.com bid, payments will only be made via Freelancer.com. Kindly do not make an offer if you plan to ask to be paid via another platform/payment method. Thanks f...
Experienced in vmware management and tuning, capable of Centos and mysql security and optimization
I have Vtiger 7 CRM, previously we had to use asterisk PBX installation for the specific setup but due to the inactive time period of the business, existing PBX settings are no longer exist. we did install issabel Asterix into another centos machine. since we already have all installations for both issabel Asterix and vtiger, and they are both in working conditions and vtiger already has the related module for its own... it should to be taken only 1 hour for a guy who has previous experience on the task... (both voip calls and vtiger are in working condition) What I want: -A single click to call customers: Initiate calls right from Vtiger CRM by clicking on -Instant pop-up alerts for incoming calls displaying a contact name -CRM Users can use single-click dialing options for makin...
I have CentOS server and I am running java application on tomcat . I need someone to Setup, configure tomcat and MySQL server. application should run properly after setting up db server. Wil share necessary credentials.
Good Morning! Im a sneaker reseller. I use proxies to get multiples tries on sites dropping these. I laready rented some /24 subnets to route on a server, installed squid as forwarding proxy, setting outgoing rules. The problem i’m facing is: on all sites i get in with those ips without being rate limited, except from 1 and i don’t understand why. As i start more than 3 tasks with 3 diff ips, i get rate limited, after a while all ips go through. The site is footlocker. Thanks
We are looking for a programmer knowledgeable in PHP to make a script that will be hosted on our server (CentOS + cPanel) that will allow us to enter any domain then it will go out and parse that single URL and list all domains (de-duped) that are connected to that page. The output format would be: : . . . ...etc For example, if we enter into the script, it would output scrape that single URL then see that there are 3 domains used in the page source code to fully load that page (Usually CDN URLs, Google Analytics...etc) so the output would look like this: : . . . Another input example: Expected Output: : . .
Szukam osoby do stałej współpracy w zakresie rozwoju naszych serwisów. Praca składająca się z kolejnych zleceń-projektów, każdorazowo szacowanych czasowo i wycenianych. OS: Centos 7 Apache 2.4 PHP 7.1 MariaDB 10.2 Wymagana biegła znajomość języka polskiego
install centos 7 and configuring csf firewall for task server
...cuando ejecutamos un proceso que llama aproximadamente mas de 3 millones de registros, despues de 1 minuto recibimos un erro de "Time Out" desde Oracle Apex. Para solventar el problema decidimos hacer lo siguiente: 1-We migrate from Oracle 11g to Oracle 19c in an RDS in AWS. 2-We update our version of Oracle Apex to the last version that until a month ago was 20.0. 3-And we create an ORDS in CentOS to improve Apex performance and better manage queries. 4-We try to optimize the query that brings more than 3 million records caused by the "timeout". Until this moment we think that everything was solved because the process did return data in seconds, but from one day to the next the "time out" back again, and it has become unstable, sometimes it works...
Need a Dev OPS Specialist to create a MEAN stack Platform in a standalone CentOS server. Required to secure the server. harden the server Migrate a Website from WordPress hosting to individual Hosting
hi Ranrui, I have this project i need to do be done by end of May 2021. 1) Run linux CentOS provided (VM) 2) Perform system audit on the OS and compare against some auditing standards.
install centOS 7 and configure csf firewall on it
Good Morning! Im a sneaker reseller. I use proxies to get multiples tries on sites dropping these. I laready rented some /24 subnets to route on a server, installed squid as forwarding proxy, setting outgoing rules. The problem i’m facing is: on all sites i get in with those ips without being rate limited, except from 1 and i don’t understand why. As i start more than 3 tasks with 3 diff ips, i get rate limited, after a while all ips go through. The site is footlocker. Thanks
I have my existing website written in ruby on rails, deployed on aws and having centos machine. I need to completely revamp the same in React.js on frontend and node.js on backend and need to deploy using docker. Please ping, only if you have knowledge of all the mentioned tech stack as already my time got wasted.
We are looking for a Linux specialist to help us package Java applications. The successful applicant will have: - An excellent working knowledge of Red Hat / Centos Linux - Experience with packaging a Java application into an RPM. - Expertise in working with Virtual Machines (VMs) Willing to work with my Java developer to get it done. The process for packaging a Java application into an RPM will need to be fully documented.
Install SSL Certificate on centOS and fix the current SSL issue
Hi Batyr R., I need to implement various site-to-site VPN and remote VPN access scenarios using strongSWAN and OpenVPN. More exactly 1. site-to-site IPSec VPN using Strongswan 2. remote access IPSec VPN using Strongswan 3. site-to-site SSL VPN using OpenVPN 4. Remote access SSL VPN using OpenVPN In all these scenarios, as a VPN gateway you can use any Linux distribution (Ubuntu, CentOS, etc). For remote VPN access, you can use Windows workstations. Can you help me with this?
Hi Vipin G., I need to implement various site-to-site VPN and remote VPN access scenarios using strongSWAN and OpenVPN. More exactly 1. site-to-site IPSec VPN using Strongswan 2. remote access IPSec VPN using Strongswan 3. site-to-site SSL VPN using OpenVPN 4. Remote access SSL VPN using OpenVPN In all these scenarios, as a VPN gateway you can use any Linux distribution (Ubuntu, CentOS, etc). For remote VPN access, you can use Windows workstations. Can you help me with this?
Hi Abdelfadeel, I need to implement various site-to-site VPN and remote VPN access scenarios using strongSWAN and OpenVPN. More exactly 1. site-to-site IPSec VPN using Strongswan 2. remote access IPSec VPN using Strongswan 3. site-to-site SSL VPN using OpenVPN 4. Remote access SSL VPN using OpenVPN In all these scenarios, as a VPN gateway you can use any Linux distribution (Ubuntu, CentOS, etc). For remote VPN access, you can use Windows workstations. Can you help me with this?
We have just upgraded from Magento 1 to Magento 2 and switched to a new dedicated Linux server. Everything is running very slowly with very high CPU load. We already did all the basic optimization as suggested by Magento but the load is still so high and we can not even save some products ...should be running quickly so there must be some bottleneck somewhere or some misconfiguration. We need someone with advanced server configuration knowledge and experience as the basic things like caching and some SQL optimization have already been done. Server specs: Dell PowerEdge R620 - 2 x Intel Octa-Core Xeon E5-2640v2, 2.0 GHz - 6 x 500GB SSD - 192GB DDR3 RAM - Hardware RAID 10 - Linux CentOS v7.x - cPanel/WHM Premier Metal - 1GbpsBandwidth - Litespeed commercial with Litemage cache. - ...
Updated ubuntu mail server yesterday and system is now broken. Setup is dovecot, postfix, roundcube and other common security apps. Users are system users. Need help repairing system.
Update existing image (i.e centos, windows) to a new version of the image on a Managed Instance Group in GCP with the help of Cloud Functions and Python. Usually, we do the same using a command "gcloud compute instance-groups managed rolling-action replace xxx" against a MIG
The website contains a historical record of every security announcement related to Centos Linux going back to 2005. I require a small command-line Java program that unzips and parses the monthly gzip archives of these emails, enriches their data with additional data downloaded from , and finally, for each email, reformats it into a special JSON file. Deliverable: 1. Converter: A Java program (source code, unit tests, and build script) that when invoked in a directory (e.g., java -jar .) locates every "*." email archive file in the current directory (and subdirectories) and generates (or regenerates) the "RH??-*.json" files that correspond to the data the Java program extracts
Hello everyone, I have a server and two VM on it which are Centos and Windows. I want to backup Centos VM for local disk and remote disk everyday from Veeam Backup program. I have these kind of confiquration but I have some problems and questions. Is there anyone who expert that subject? Please text me via chat. Have a nice day.
We got server which gives no space left on device df -h gives: /dev/mapper/lv_root 50G 31G 19G 63% / tmpfs 16G 0 16G 0% /dev/shm /dev/cciss/c0d0p1 477M 147M 305M 33% /boot /dev/lv_home 339G 124G 198G 39% /home df -i / gives : /dev/mapper/lv_root ...gives: /dev/mapper/lv_root 50G 31G 19G 63% / tmpfs 16G 0 16G 0% /dev/shm /dev/cciss/c0d0p1 477M 147M 305M 33% /boot /dev/lv_home 339G 124G 198G 39% /home df -i / gives : /dev/mapper/lv_root 3276800 3276800 0 100% / we found out huge mysql-bin fils is eating up all our space Server is Centos 6 with directadmin panel...
Help me with installing CentOS 8 and cPanel/WHM on my server.
...with a Ubuntu server with a dovecot error: - LSB: Dovecot init script Loaded: loaded (/etc/init.d/dovecot; generated) Active: failed (Result: exit-code) since Wed 2021-05-12 13:24:29 CDT; 15min ago Docs: man:systemd-sysv-generator(8) Process: 14495 ExecStart=/etc/init.d/dovecot start (code=exited, status=1/FAILURE) May 12 13:24:29 systemd[1]: Starting LSB: Dovecot init script... May 12 13:24:29 dovecot[14506]: doveconf: Fatal: Error in configuration file /etc/dovecot/conf.d/ line 30: Unknown settin> May 12 13:24:29 dovecot[14495]: * Starting IMAP/POP3 mail server dovecot May 12 13:24:29 dovecot[14508]: doveconf: Fatal: Error in configuration file /etc/dovecot/conf.d/
just need a 10 min course to understand why im doing wrong while creating a birdge and adding vlan. we will test communication between 2 servers . thx
To use Python on Centos 7 to retrieve Firebase data onto MySql database. We have registered a Firebase project and linked with a camera developer. You will be provided a SSH login to Centos 7 server for the project.
