Vlan dhcp netgear Jobs

I am looking for a freelancer who can help me set up a Virtual Local Area Network (VLAN) using Cisco Switch. I do not require any firewalling solutions for this project. Skills and Experience: - Experience in setting up VLANs using Cisco software - Knowledge of network configurations and routing protocols - Familiarity with ESXI Server for virtualization purposes We need Help in Cisco Area to create 6 VLANs and the correct routing for Opnsense and ESXI. Opnsense and Esxi are set up, only the Cisco switch configuration is still missing.

FortiGate Vlan - I am in need of a skilled professional who can set up a FortiGate Vlan to Siptrcunk - The VPN connection required is IPSec - The remote site is domestic - I require multiple concurrent VPN tunnels, specifically more than 10 - The ideal candidate should have experience in configuring FortiGate firewalls and setting up IPSec VPN connections - Knowledge of network security protocols and best practices is necessary for this project.

...paperwork at this moment. at the link below there is the setup that will be made and the antennas that will be installed. The requirements i need are below. 1) Setup the network in order to have the requirements that have been asked as below [Should have available the timestamps (use period-start of IP assignment/end of assignment) that the private IPs have been assigned to your clients by the DHCP server in order to be able to track the clients if requested. Should also have a record of the static IPs (public or private) assigned to your customers. Finally, you should make sure that there is no possibility for arbitrary use of IPs (eg manual IP setting by your customers without informing you) as in this case you will not know who made the connection. (Using PPPoE would help in...

SDN Network Expert Needed for OVS, OVN, VXLAN, VNI Implementation Project Details: - we will make a cluster for ovn northbound and southbound (already have it) - then we will configure vxlan for all nodes (already have it, bu...then we will need to route traffic of one port to other isolated from other traffic (in vxlan vni) and exit. Example: we have 3 nodes, we connecting to node 1 via wg and then we need to exit via node 3 br0 interface. So we need to encapsulate trafic with specific vni and then route it to another node. May be use logical switches or routers. Because we will connect via wg then may be we can move dhcp server to ovn for for wg. - platfrom where sdn is launched is ubuntu 22.04 - The desired timeline for completing the project is within 1 week, but i prefer start...

...150mbps $250 - The form should then create a new RADIUS user that gets tied into an available VLAN in our pool of available VLANS. -- We have a list of available VLANS that can be assigned to customers as they sign up. - We have 150 VLANS that are able to be assigned to users that select option 1 - We have 100 VLANS that are able to be assigned to users that select option 2 - The form should then generate a username/password in the RADIUS server and send an email to the new user with their WiFi Login credentials, the RADIUS user should receive an available VLAN from the pools of available VLANS depending on what speed they selected. - Once the end date comes, the user account should be deleted and the VLAN should then be added back to the list of available VLANS ...

...Network Tools. The script shall be required to prompt the user provide key inputs that will customize the VM and then update all relevant packages. During installation the VM build script shall complete the following steps: 1. Prompt user to input configuration information: a. User Name: This shall be added to the Hostname + (static field+RamdomID) b. Static IP, DNS and Gateway. No DHCP. 2. Auto-Update all packages. 3. Install all Prerequisites and packages. The packages to be included shall be defined during the development process. 4. Download software from our server to enable remote control of the VM. 5. Complete health check to ensure all packages are installed and running. Overall Requirements • Installation utility shall be branded with custom logo ...

L2TP VPN between office and Home with Mikrotik Routers - I am looking for a freelancer with experience in setting up L2TP/IPSec VPN connections between office and home using Mikrotik Routers. - The ideal candidate should have prior experience in configuring L2TP/IPSec VPN connections. - Knowledge of DHCP protocol configuration is essential for this project. - Past work examples or references showcasing successful L2TP/IPSec VPN setups would be highly preferred. - The freelancer should be able to provide a brief summary of their experience in setting up L2TP/IPSec VPN connections. - Detailed project proposals are not necessary for this job.

You will have to configure an isolated Switched network behind the RIV router (Inter VLAN Router). The Switched network consists of several switches, including a core switch and the remaining floor switches. On the floor switches, client devices will be connected to the following VLANs: Production, Management, and WiFi. For the core switch, configure it as a VTP server and set it as the root for all the company's VLANs. Create all the company's VLANs on the core switch. All ports on the core switch should be configured as multi- VLAN

I am looking for a freelancer who can help me set up VLAN and subnet masks on my network equipment. I have an omada system, controller, router and multiple eap's. I have multiple vlans setup but when I adjust the main network subnet mask routing seems to fail. Ideal Skills and Experience: - Experience in setting up VLAN and subnet masks - Knowledge of network security protocols and best practices

Mikrotik DHCP showing conflict with the following Mac address 00:00:00:00:00:00. Conflict is not always it is sometimes when there are many clients not sure what is the reason. Once conflict comes up my Ubiquity Unifi AP not working good internet comes and goes not stable.

Mikrotik DHCP showing conflict with the following Mac address 00:00:00:00:00:00. Conflict is not always it is sometimes when there are many clients not sure what is the reason. Once conflict comes up my Ubiquity Unifi AP not working good internet comes and goes not stable.

I am looking for an experienced specialist to aid me in configuring a VLAN network on an Avaya IP Office system. I am in need of assistance but not sure which network setup is best for me - single VLANs or multiple - so I would appreciate help with making a decision and implementing it accordingly. The specialist should also be knowledgeable about performing just the VLAN configuration, as I do not need any help with integration into my existing network.

...need assistance with setting up VLANs and routing protocols, troubleshooting network connectivity issues, updating firmware and security patches, monitoring devices, as well as remote control of devices and full control over devices. This will be an ongoing task that would require assistance once a week., but could also be available on a one time basis. The router type I need help with is Cisco, Netgear, and D-Link....

In this role you must be knowledgeable in software and hardware. You will be responsible for assessing, designing, and implementing network security for the team. We need someone who has a strong understanding of security architecture and is able to work independently and collaboratively. Our ide...Knowledge in Server Operating Systems Knowledge in Mail servers Knowledge in Virtualizations Knowledge in Directory services Knowledge in File servers Knowledge in Firewalls, VPN's Network Access Control (NAC) Intrusion detection and prevention systems (IDS and IPS) Data Loss Prevention (DLP) Host/Endpoint Security Web content filtering Cloud Access Security Broker (CASB) Email security (TCP/IP, DHCP, DNS, Group Policy, Active Directory) Hardware (Lenovo laptops, Apple and Android ...

...cellular LAN; a Wireless LAN; and a Wired LAN with a wireless router. The system will be a 4G/5G architecture with VoIP capability and data transfer. Each of the three interconnected networks will be accessed through a Gateway/NAT router with IPv4 static public IP addresses externally and private IPv4 access internally. The access points should be interconnected and each LAN will have its own DHCP server for internal (private) IPv4 addressing. Run a simulation to demonstrate the functionality of your network by sending both voice and data information. The mobile devices have the capability of a smart phone which means that they can communicate with the access point using either voice or data LAN 1 Cellular System • Two Cell Towers • Three Smartphones • Cen...

I am looking for a freelancer who can help me set up VLANs on my UDM Pro. The purpose of this VLAN setup is to segment network traffic. Specifically, I have a list of devices or users that will be assigned to these VLANs. I am looking to set up 1-3 VLANs in total. Ideal skills and experience for this project include: - Strong knowledge and experience in setting up VLANs on UDM Pro - Understanding of network segmentation and traffic management - Ability to configure VLANs based on specific device or user requirements - Familiarity with network security best practices - Experience in optimizing network performance through VLAN setup

My business is in need of an experienced network engineer to help diagnose and troubleshoot an issue with our Local Area Network (LAN). We are havi...who has a firm grasp on all network security protocols and procedures. The ideal candidate must have extensive knowledge of current LAN technologies, firewalls, and network equipment. We are looking for someone who is highly organized and can apply their understanding of network architecture to potential solutions. High-level customer service skills are also essential. We have Netgear S3300-28x and M4300 Netgear switches and need the most effiicient network setup for maximum speed for out video and photography editors If you believe you have the requisite experience and abilities to tackle this network issue, please get in ...

I am seeking a skilled professional to assist me with migrating my Windows 2012R2 DC1 and DC2 physical servers to a new Win2022 environment. The ideal candidate should have experience in Windows server migration and be able to co...Win2022 environment. The ideal candidate should have experience in Windows server migration and be able to complete the job efficiently and effectively. Current Server Setup: - DC1 is physical server and DC2 is virtual Additional Services: - DNS Preferred Migration Method: - Side-by-side migration method is preferred Skills and Experience Needed: - Experience in Windows server migration and DHCP services - Ability to complete the job efficiently and effectively New virtual servers of 2022 are already setup and updated. Will use TeamViewer for remote...

...freelancer who can assist me with GPON OLT provisioning. I already have the Genexis Saturn Solt33 08p equipment in place, but require basic configuration. The ideal candidate should have experience in GPON OLT provisioning, specifically with Genexis equipment. Additionally, they should possess the following skills: - Expertise in configuring GPON OLT systems - Knowledge of basic configuration, VLAN, and QoS - Familiarity with Genexis equipment I am looking for a freelancer who can work efficiently and effectively to configure my GPON OLT system. This is a one-time project, and the freelancer will have the opportunity to work with me on future projects if the work is satisfactory. The following are the expectations for project completion: - Connect to the VPN network using PP...

I am needing an expert in dd-wrt to setup a router/sw...requires custom setup and fault finding. I have a router setup with the latest dd-wrt firmware, but am having trouble with the custom setup. I am joining 2 sites/networks, each with their own gateway, and own DHCP server. What is needed is; 1) Disable DHCP server on the switch/router (already done) as DHCP server is elsewhere on local network 2) Setup the 4 lan ports as a ethernet switch (currently doesn't seem to work as a switch/router) 3) Setup one lan port, or the WAN port (as local ethernet port) to block all incoming and outgoing DHCP request 4) Setup Wifi to connect to and allow DHCP requests from local network See attached diagram I have access to the GUI and hope that using Teamviewe...

I am in need of someone who can help me with my Microsoft DNS server. I will outline the issue below. Only bid if you can help without remote access to the server. I am happy to provide screenshot and command outputs over the chat. I have a simple LAN with one subnet. One Windows Domain controller (windows server 2016) with all other roles in it such as DNS DHCP. At one point I decided to make one of the another windows (windows server 2012) server secondary Active Directory and DNS server. At some point, I am not sure, but may be changed scavenging. Now the issue is the first primary DNS server does not show any zone records while the secondary server has all of them. Even if I add one manually into the primary it gets deleted automatically and moved to secondary DNS server. So wh...

Goal: https:...is running via the Ubuntu 22.04 iptables, rather than via the vm router. Somehow I think I'm missing bridging the WAN interface NIC0-br0-vm router? The 2 routes for upstream connection are: default via dev br1 proto static metric 100 onlink default via dev br0 proto dhcp src metric 100 I have the first one set manually. The latter is due to the DHCP client enabled on br0. So the bridge gets a config from the ISP router. I want to go out via pfSense by disabling the DHCP client on br0 and enable it on pfSense WAN, assuming this is connected to br0. Here's my latest configuration: Bridge link: Ip -c a: Ip r: Networkd configuration:

Have a Firewalla gold router and firewall. Using Omada EAPs, 1 managed Omada switch, 2 unmanaged netgear switches, and Omada oc200 controller. Looking for 2 deliverables: 1. Create VLAN for IoT devices 2. Setup 1-way communication so devices on main network can access printer/Roku/etc on IoT VLAN

...znalosti/zkušenosti: - Přehled o cloudových službách (AWS, Azure) včetně jejich nastavení, správy a řešení problémů. - Dobrou znalost počítačových systémů, zabezpečení, správy sítí a systémů, databází a systémů pro ukládání dat a telekomunikačních systémů. - Zkušenosti s virtualizačními technologiemi jako je VMware nebo Hyper-V. - Zkušenosti s prací s síťovými protokoly a službami (např. TCP/IP, DHCP, DNS, VPN). - Zkušenosti s prací v systémech Linux a Windows Server. - Znalost nástrojů pro monitorování systémů (např. Nagios...

create an implementation and secure migrat...Ranges . Locks down unauthorized port ranges . Locks down unauthorized programs . Allows for third-party agreements . Uses VLANS for management . Uses VPNs as appropriate for confidentiality 3. 2 x Windows 2016/2019 and 2 x Linux servers (must contain 2 flavors or more) and must contain: . DNS (trusted DNS or secure DNS) . DHCP (used to assign IP addresses to devices) . NTP (trusted servers) . A database (SQL or Oracle) . Certificates based privacy (minimum) 4. How will you Securely migrate on-premises data to the cloud environment that you have created? Use alot of visuals from aws cloud architecture and bullet points explaining e...

Windows VPS Boot Issue: Troubleshooting Blue Screen of...Blue Screen of Death - Troubleshooting: Yes, but the issue persists Ideal Skills and Experience: - Proven experience in troubleshooting Windows VPS boot issues and resolving Blue Screen of Death errors - Familiarity with virtualization technologies and hypervisors (e.g. Hyper-V, VMware) - Strong knowledge of Windows Server operating systems and related technologies (e.g. Active Directory, DNS, DHCP) - Ability to diagnose and resolve hardware and software issues related to VPS booting and performance - Excellent communication skills and availability to work remotely on short notice If you have the skills and experience to help me resolve this issue, please submit your proposal with your relevant experience and availability. ...

Tengo un proyecto ya hecho. Necesito que se configure una VLAN troncal, una NAT dinámica y que se arregle un error en la redistribución.

...desire to grow in your role and with the company - You are proactive; a tenacious self-starter to the core - You are technically savvy with a deep knowledge of networking protocols and experience in debugging network issues (packet capture and analysis, etc.) - You have strong experience with common protocols and services (FTP, TFTP, NTP, SNMP, syslog, etc.) and a thorough understanding of DNS, DHCP & Linux with 5+ years’ experience - You are an excellent communicator - you have a way with words & can connect easily with others. You possess a strong ability to explain highly technical issues to non-technical audiences - You have a passion for constant improvement - always looking to do things better (both personally, as part of a team and for the company) - You are ...

I have multiple ISP providers, I would like to create multiple vlan where each router will be connected, each ISP router is connected to a different Mikrotik and the output of each Mikrotik goes into a separate uplink vlan port of the Huawei OLT (Mikrotik1 output 1 connect to G0, Mikrotik2 output1 connect to G1, Mikrotik3 output 1 connect to G2 etc...) I am not sure if the Line profile or the Service profile of the OLT are being configured correctly. I meant T-CONT, GEM Port index and GEM Port connection index... I would like someone with the knowledge to verify the configuration I have done and tell advise if it is wrong. Huawei OLT MA5608T

...about 20 different windows and 20,000 options just for trying to print to a single printer, and the Ricoh documentation is completely incomprehensible. One other issue may be that on the printer configuration page I printed, under Host interface it says DCHP Active and gives an IP address, but under IPv6 Configuration it says DNS Method: AUTO-OBTAIN (DHCP) but then under DHCP it says "Inactive" and doesn't give any IP address under IP Address (DHCP). I have no idea what any of that means, but hopefully that is some help. Please don't reply by just copying and pasting your standard text - I want to know who can fix this problem, and has understood the issue. I've attached some screenshots to hopefully help with that. So please start your r...

I need assistance with flashing my Netgear R6400v2 router with DD-WRT firmware. I do not currently have DD-WRT firmware installed on my router. I need help obtaining the correct firmware and instructions for my router and for someone to flash the router via remote logon. Ideal Skills and Experience: - Experience with flashing routers with DD-WRT firmware - Knowledge of Netgear R6400v2 router - Ability to remotely logon and install firmware on the router Preferred Method: - Remote logon and installation of firmware on the router

...relevant field. The selection criteria should highlight the technical knowledge and skills required for the position. The freelancer should have experience in writing selection criteria for government positions. The final document should be clear, concise, and persuasive. Criteria: • Demonstrated experience in infrastructure applications for delivering management and authentication services, such as DHCP, DNS, Active Directory, DFS, NTFS and storage systems • Experience in Microsoft 365, Azure, and cloud services. • Knowledge of ITIL and demonstrated analytical and problem-solving skills to assess and resolve complex technical issues and initiate ongoing improvements. • Expertise in identifying and implementing contemporary and emerging business and t...

We ar...structures, and algorithms. -A quality-oriented mindset with a strong commitment to automated testing, metrics collection, monitoring, and continuous improvement in all of your work. - 8+ years of experience in software development of which a minimum of 3 years of experience building apps on Mac - Proficient in C/C++ Programming - Understanding of network & security protocols (e.g. TCP, UDP, IP, HTTP, DHCP/DNS, TLS, Active Directory/LDAP, SSO/SAML/Oauth) - Degree in Computer/Electronics/Electrical Engineering -Device level driver development experience Even Nicer to have: -Working experience with VPN technologies specifically in IPSec/IKEv2 is a plus -Working experience with Cryptography and PKI -Demonstrable experience in building highly scalable, performant, and low-l...

I am looking for a freelancer to update my current PacketFence Server configuration to meet new requirements. The ideal candidate should have experience in PacketFence configuration and troubleshooting. New requirements: - Allow the currently isolated sub-reds to have access to the server TCP services a...troubleshooting. New requirements: - Allow the currently isolated sub-reds to have access to the server TCP services and UDP IPTVs channels. Current State: - PacketFence is set up as a gateway in Inline Mode to create the isolated networks by Roles Solutions: 1. Update the current inline mode to allow the firewall to have access to the TCP services and UDP channels and VOP content 2. Set up of PacketFence VLAN mode 3. Open to a better solution to update the network with Packet...

...basado en un entorno empresarial real. Debéis poneros en la piel de un administrador de sistemas y configurar todo un entorno empresarial completo, contando servicios y usuarios que hagan uso de esos servicios, además de equipos cliente. Como contenido mínimo se solicita que al menos haya tres servidores comunicados entre sí e implementar mínimo tres servicios de red, uno debe de ser DNS y otro DHCP, quedando el tercero a vuestra elección. He de indicaros que los servicios deben de estar completos, es decir, por ejemplo, si se configura un servidor web, no vale con simplemente instalarlo, habrá que configurar en una medida mínima dicho sitio web, por ejemplo, instalando y haciendo una pequeña configuración de u...

We looking for someone who create us a service: We have an iso with that iso a computer with active internet connection (dhcp) can boot and with the iso a connection to our server is generated A menue will appear We can choose which operating System (Debian, Ubuntu, Windows) whatever will be installed on the computer We should get a guide how we can add isos or Images to the server so we can install any other operating system - but the Base ISO from which the client is booting should not be changed it should be everytime the same. A computer can be a VM, a Server, or a physical Computer. We expect from you - Choose a solution - install the solution - test the solution - do a complete documentation - create a guide how we can add , change and replace ISOs or Images on Boooti...

Adding a new domain controller to a network and decommission the old DC controller. Server 2016 to server 2022. Would like to have step-by-step instructions. There's no DHCP that is handled by the router. only DNS . I promoted the new DC and transferred all the roles. I forgot to uncheck the global catalog and then I decommission the old DC. Once I did that my DNS stopped working I could not figure it out what was going on. I would like to make sure that my DNS is pointing to my correct DC. So that my other workstations will work correctly.

I am looking for a Cisco Meraki expert to configure several VLANs for my network. I need between 1-5 VLANs configured with specific routing and firewall rules. The devices that will be connected to the VLANs are a mix of servers, workstations, and network devices. The ideal candidate for this project will have experience with Cisco Meraki configuration ...connected to the VLANs are a mix of servers, workstations, and network devices. The ideal candidate for this project will have experience with Cisco Meraki configuration and a strong understanding of VLANs, routing, and firewall rules. They should also be able to provide recommendations for best practices and ensure the network is Certification ECMS and a good working Knowledge of VLAN management using Meraki Infrastructure

We looking for someone who create us a service: We have an iso with that iso a computer with active internet connection (dhcp) can boot and with the iso a connection to our server is generated A menue will appear We can choose which operating System (Debian, Ubuntu, Windows) whatever will be installed on the computer We should get a guide how we can add isos or Images to the server so we can install any other operating system - but the Base ISO from which the client is booting should not be changed it should be everytime the same. A computer can be a VM, a Server, or a physical Computer. We expect from you - Choose a solution - install the solution - test the solution - do a complete documentation - create a guide how we can add , change and replace ISOs or Images on Boooti...

I am in need of an expert freelancer who has experience with Mikrotik PPPOE servers, VLANs, OLT Huawei, and ONT. This project has already being designed and implemented. I will like someone to overview the project and tell me what is missing and what can be done for improvements. And guide me to implement the best solution. The ideal candidate should have in-depth knowledge of the following: - Configuring Mikrotik PPPOE servers - Setting up VLANs and connecting them to switches - Configuring OLT Huawei and ONT - Troubleshooting network issues Current design is attached. The project must be completed within 3 days. The freelancer should be able to work efficiently and deliver high-quality results within the given timeline.

I need some network professional that have good experience with Arista EOS and Cisco IOS. You need to work with both devices in the Area of VLAN, BGP SNMP, etc. I will give you access to both Consoles Remotely via AnyDesk. COM4 Arista DCS-7124S COM5 Cisco 6509 We have a Cisco 6509 which will be the Upstream for the Arista. You need to configure 2 BGP Sessions as well on the Cisco and setup 2 bgp instances on the Arista that need to establish with the Cisco 6509 (upstream) and its ASN. Also you need to create multiple VLANs etc. Attached in PDF is step by step tasks you need to do. If you think you are the right one for this job let me know

My project is to set up a server running Windows Server 2019 with various roles, including DHCP Server, DNS Server, and Active Directory Domain Services and SSL cert, this will be for a small office of 7 users only. The server does not need to be accessible from different networks. Any additional software required will be discussed with the freelancer. This will be for us to utilize in our day-to-day operations and activities. We require someone with a great knowledge of Windows Server and experience in setting up the relevant roles. Knowledge in Linux would also be desirable. The successful freelancer will be able to complete this project within a specified timeframe.

I have a routeros config, 1 wan 1 lan 1 static routing on a separate network. eth1 wan eth2 static routing eth3-5 + wifi bridge on lan router will have to use eth2 dns for lan but assign form dhcp standard dns (such as 9.9.9.9), some local clients will use router as dns configured as static. I will need this config to be ported on openwrt or pfsense.

Requirements:The network supports two VLANs: Lab and Support. The address-ranges for the VLANs are shown in the figure. No routers can be used internally except for the R-Edge router, which connects the network to the internet. You need to implement two-layers switching architecture ...for the R-Edge router, which connects the network to the internet. You need to implement two-layers switching architecture with one switch at the distribution/core layer and three access switches. All the access switches support both VLANs. There is only one IP address assigned to this network. R-Edge must use PAT to share it between all the devices in both VLANs. You need to implement inter-VLAN routing. You can use either Layer-3 switching at the distribution switch, or Routing-on-a-stick ...

need someone to configure ADDITIONAL VLAN on the switch for Wifi only, we currently have 2 vLans 1 for data and 1 for voice

Need to configure a 60f fortigate firewall with a vlan for yealink hardware running on vonage

Bitte melde dich an oder Loge dich ein um Details zu sehen.

Hi. I would need a Cisco technician for my Cisco 1111 router configuration. I have two ISP routers and would like to set up a VLAN with load balancing. One Vlan for primary WAN 1( ISP 1), fallback WAN 2 (ISP 2) and one Vlan for ISP 2 primary and as fallback ISP 1.

I am looking for an expert to do configure pfSense for a home network. The specific security protocols needed are Firewall Protection, and I will also need DHCP services setup. No user authentication is necessary. It is important that the configuration is secure and up-to-date. I am looking for a high level of expertise and experience developing pfSense solutions. If you have the skills and experience, please send me a bid.

...2nd domain controller, file server & DHCP server) and 1 instance of Windows 10 (make sure it's Professional) called KPUClient1. Use the Host Only adaptor in VMware, and configure the following address space: - the two servers will be configured with and .15 respectively with the DHCP scope being between .50 and .150 - be aware that 'ping' is blocked via the firewall by default, so...... - The domain you use will be <firstname> - eg Create an admin account with your first name as user name (who has admin permissions) so you don't have to log in as administrator all the time. (hint: add domainadmins and administrators permissions) KPUDC2 will be a backup Domain Controller, a file server, and DHCP server with the above noted sco...