Design & Build PCB with PIC MCU, Capacitive Buttons, RFID IC & etched 13.56 Mhz antenna

$250-1030 USD

Abgeschlossen

Veröffentlicht

vor fast 8 Jahren

$250-1030 USD

Bezahlt bei Lieferung

The job will be to design, build and populate, write test code in C then DHL a double sided PCB for a prototype that has a PIC microcontroller, 14 etched capacitive buttons and an RF transceiver IC (CR95HF) with an etched 13.56MHz antenna. The main reason I am doing this prototype is to test the possibility/problems of having the etched 13.56MHz RF antenna in between the capacitive buttons (as shown in the sketch below). Before you start designing please do a small cost benefit analysis (a few sentences only) of PIC’s mTouch vs other methods of implementing capacitive buttons in terms of implementation cost & component count. I would prefer if the schematic/PCB capture was in either Altium or Eagle, the code however must be in C and programmed preferably using PICKIT 3. If you do not have Altium, Eagle or PICKIT 3 please let me know when you quote so I can see if I can accept the different software package/programmer DO NOT include the cost of buying the components or shipping the PCBs in your quote , I will pay you separately for that as you do not know the cost now. PLEASE READ THE ATTACHED PROJECT BRIEF FOR MORE INFO BEFORE QUOTING! Many Thanks for reading.

C Programming

PCB Layout

Projekt-ID: 10612383

Über das Projekt

14 Vorschläge

Remote Projekt

Aktiv vor 8 Jahren

Möchten Sie etwas Geld verdienen?

E-Mail-Adresse

Vorteile einer Ausschreibung auf Freelancer

Legen Sie Ihr Budget und Ihren Zeitrahmen fest

Für Ihre Arbeit bezahlt werden

Skizzieren Sie Ihren Vorschlag

Sie können sich kostenlos anmelden und auf Aufträge bieten

Vergeben an:

@VoblNet

I can do a PCB prototype, and test the functionality and fix problems if they occur, and tuning the antenna parameters. I work with Altium. I like STM32, and recently SAMD21(I deep worked), they have the support of the capacitive buttons. For RFID 13.56MHz, I am basically used the RC522.

$1.030 USD in 65 Tagen

5,0

(36 Bewertungen)

6,7

14 Freelancer bieten im Durchschnitt $1.243 USD für diesen Auftrag

@sagradoamicus

Hi Sir I am an expert electronics engineer with almost 7 years of experience in design and development of embedded systems and RF designs. Please have a look at my profile I have gone through the details provided as document. I assure you quality work and on time delivery. Please give me a chance to prove myself. Regards

$2.000 USD in 10 Tagen

4,9

(197 Bewertungen)

7,9

@CoherentTech123

Hello Dear, We are a team of experts with a cumulative experience of more than 50 years in the field embedded systems, prototype development, Engineering a product from concept to realization and mass production. Our experts have hands on experience working with 8-bit, 16-bit and 32-bit MCUs developing ultra low applications featuring complex designs. I have checked the details of your project and shared the same among my team. We have all the resources and inventory to start. We have MPLAB with HI-TECH compiler and pickit3 tool. We have years of experience working with RF circuits and pcb antennas. I assure you your project would get probably 30 bids or even more in 3 days making it difficult for you to select the right candidate. However I would suggest you to spare sometime and write back to us. We are often online and available. I have offered you the best possible quotation Regards Ch

$800 USD in 30 Tagen

4,5

(62 Bewertungen)

6,2

@Anthony989

Hello, I am Anthony. I am working FULL TIME as freelancer. I have double degrees in Mechatronics and Applied Science fields. I have very good feedbacks on freelancer.com . Please check the link at the end and review my feedbacks. So you can get an idea of my work. I have the capability to guide you until the manufacturing stage. I have many contacts in China and can help you to setup there if you are gonna mass produce your product. https://www.freelancer.com/u/Anthony989.html Thank you Anthony

$777 USD in 10 Tagen

4,8

(39 Bewertungen)

6,1

@AndrijIN

Hello, I can do this job for you in Cadsoft Eagle (or in Altium, if you prefer it) including schematics design, PCB layout, firmware, and also a simple user interface for your PC if you want it (it is not required, but could be very usful) for Windows or Linux platform. Thanks.

$500 USD in 20 Tagen

5,0

(13 Bewertungen)

5,2

@microembedded

hi i am an electrical engineer. i have vast experience related to circuit design and pcb layout. i have done many embedded system projects. i have experience regarding pcb design. let me know if you are interested. we can discuss further on chat.

$1.000 USD in 25 Tagen

4,9

(10 Bewertungen)

5,3

@jitendrabaraiya

i can do your job.

$2.222 USD in 60 Tagen

5,0

(8 Bewertungen)

4,5

@nunosmar

I have experience in RF, so I think will be useful for this project. For the PCB design usually I use OrCAD, I think it can export in different file formats. For programming can I use PicKit3 and the programming tools from Microchip. My proposal includes the following: - Project support and PCB design (1 review) - Assembly and test hardware for 1 prototype - Firmware for test purposes (1 review) Does not include: - PCB and components - Delivery If you need more info please feel free to contact me.

$750 USD in 10 Tagen

5,0

(1 Bewertung)

2,8

@joaquinaldunate

I have more than 15 years of experience on PCB designs, and 3 years of experience on RF PCB designs. I'v been working with several PCB software designs, in particular with Altium Designer. Also I have access to laboratory equipment to test the prototype in RF terms. Metodology: 1) Evaluate the capacitive interface alternatives and choose one solution (2 days) 2) Make a mockup layout for an RF characterization trough simulation (1 day) 3) Build the mockup layout and verify experimentally the impedance value of the antenna (5 days) 4) Send a fabrication order of the PCB Gerbers files to Oshpark (14 days) 5) In parallel, from day 1, code the required software (10 days) 6) Populate the PCB with an electronic controlled Temperature oven ( 1 day) 7) Characterize and Debug the PCB (20 days, it can be less depending on the problems found) 8) Document the process and results, Generate a technical report including the characterization of the board and all relevant information. 9) Send the prototype to the client (the transport cost is not included in the payment) The methodology is based on my experience, feel free to contact me for more details!

$1.300 USD in 45 Tagen

0,0

(0 Bewertungen)

0,0

@ElectronicsGuru1

Experienced Microwave and RF engineer here, doing my PhD research and Gold-medal in undergrad. I have firm knowledge of microwave in general especially Low noise amplifier (LNA), Power Amplifier (PA), Mixer, Oscillator, Impedance Matching, Filter design, Waveguides, efficient antenna designs including monopole, dipole, PIFA , patch, loop, vivaldi antennas etc. Hands on experience on ADS/HFSS softwares for simulations. I have access to LPKF PCB laser machine for rapid prototyping and anechoic antenna chamber for antenna testing. I can give you professional support with the best of your satisfaction, once you try working with me you will surely rehire me. Looking for your +ve response soon. Regards

$777 USD in 30 Tagen