Juniper Jobs

Getting some errors with my Juniper SRX340 after a power outage. It showing the following error after starting: ------------------------------------------------------ U-Boot 2013.07-JNPR-3.1 (Build time: May 03 2016 - 23:50:19) Using DRAM size from environment: 4096 MBytes checkboard siege SATA0: not available SATA1: not available SATA BIST STATUS = 0x0 SRX_340 board revision major:1, minor:6, serial #: CY2516AF0102 OCTEON CN7130-AAP pass 1.2, Core clock: 1200 MHz, IO clock: 600 MHz, DDR clock: 667 MHz (1334 Mhz DDR) Base DRAM address used by u-boot: 0x10f000000, size: 0x1000000 DRAM: 4 GiB Clearing DRAM...... done SF: Detected MX25L6405D with page size 256 Bytes, erase size 64 KiB, total 8 MiB PCIe: Port 0 link active, 1 lanes, speed gen2 PCIe: Link timeout on port 1, probably the...

It’s includes, Stacking, Vlan, Inter Vlan routing DHCP, STP, Link aggregation, Port security Total Network Size : 5 internal /24 subnets

Hi, We have a customer that has a Juniper SRX340 Firewall. There is a fixed IP for the WAN on a 29 subnet and there needs to be 2 LAN's and Port forwarding needs to be done for single external ports to a different internal port on one of the LAN's and there also needs to be port forwarding for a range of external ports to the same port on the internal LAN. We have tried to set this up already through the J-Web interface, however, we are unable to connect to the internet then connecting to the LAN port. I can send the current config over if required to see why we are not able to access the internet from any machine on the LAN.

Hi I am looking for someone to configure a QFX5210 Switch. Basics is that it is connected to a router/firewall and a range of servers that all have static IP Addresses. Currently just plugging the machines and the router in does not seem to work and the interfaces probably need configuring so the machines will be able to access the internet through the router.

hello we are isp and providing FTTC connection to our client so we need a PPPOE sesscion configure and connect with end cisco router asr 1001 and juniper ex 4500 switch connection at present at our end. Client end connects with vdsl router. so we need to provide few package such as 20 meg 40 meg 80 meg internet package for our client on it and their home router will able to provide thouse services.

hello we are isp and providing FTTC connection to our client so we need a PPPOE sesscion configure and connect with end cisco router asr 1001 and juniper ex 4500 switch connection at present at our end. Client end connects with vdsl router. so we need to provide few package such as 20 meg 40 meg 80 meg internet package for our client on it and their home router will able to provide thouse services.

Looking for a high quality network engineer familiar with large scale networks, L2 / L3 protocols, Cisco, Mikrotik, HP, Juniper familiarity and available in the evening in the US Eastern TZ.

Looking for a high quality network engineer familiar with large scale networks, L2 / L3 protocols, Cisco, Mikrotik, HP, Juniper familiarity and available in the evening in the US Eastern TZ.

Bitte melde dich an oder Loge dich ein um Details zu sehen.

We are looking for two network administrator having juniper and mikrotik routers and switches.

...project itself for everyone. The purpose of this application, is the ability to send a command, set of commands, config backups, visual representation of the device in question, along with LLDP info with the connected neighbor network switches and routers across the organization. This could be a challenge, due to the various amount of network device OSes (such as Cisco IOS, Extreme EXOS, Juniper JunOS, Ruckus FastIron, and so forth - all with different syntaxes and features. This system needs to be modular to support the ever growing list of network devices, OSes, and OS versions with differing features/functionality between OS versions. This means, there needs to be an easy way to update this system as time goes on with new switch/router OSes and features - possibly by way of ...

Hi, We need ongoing IT support and network engineering to assist with setting up on-site office network and IT environment setup. Someone familiar with network equipment such asks firewall gateway/hp/juniper/cisco switch & routers and have experience in wireless APP, being able to troubleshoot network issues remoted with the support fo our onsite staff. We also prefer someone have experience in cloud base solutions as Microsoft 365 etc

bgp bonding vlan routing Switch configuration using protocols

I am switching my job after 9 years and the new company needs a Juniper Certified candidate. I have over 28 years experience in Computer Networks from Novell Netware, Microsoft Active Directory integrated DNS and DHCPnewer version 2019 Server, Microsoft O365, Microsoft Intune, and Nextiva VOIP, Cisco Routers and Switches, Netgear Firewall and VPN, Linksys Routers and Firewall,, Sophos Firewall XG210,, CradlePoint and the list is long. I need Juniper Certified Expert in Switching and Routing with Exam material to teach me one to one over Juniper SRX Firewall

We need an expert in Juniper LNS / L2TP configuration . The basic set up is complete and the Juniper MX960 is fully connected to the IP networks, it is just the creation of the tunnels that is not completing fully. If you do not FULLY understand about LNS configuration, then please do not bid on this project.

We have replaced our router (located at another site) and need to configure IPsec tunnel to our other office. Replaced router: Draytek 2865 Office router: Juniper SRX220H Please ask if you have questions.

Preventative Maintenance DC and DR MIS Update Support for Patch update and migration activity. Coordination for RMA Implementation PAN INDIA Attend Call and site visit for DC and DR for L-1/L-2 Support for core switch and Firewall Coordination with JTAC

Looking for an engineer on an ad-hoc basis to do some engineering. Our stack is pfSense Juniper We are looking to introduce GRE tunnels between multisites back to our core router. Rob

Hi Farrukh A Looking for an engineer on an ad-hoc basis to do some engineering. Our stack is pfSense Juniper We are looking to introduce GRE tunnels between multisites back to our core router. Happy to discuss price :) Rob

We need to migrate Cisco WS-C6509-E switch configuration to Juniper QFX5100-48S.

Project Details $250.00 – 750.00 USD Hello there, our company needs a custom automation reporting tool that: -- Written in PHP, Python and have Database -- Have portal to manage/add remote device, add show command logs and add report template -- Collect data using Python through SSH to the jump-server, and collect logs to Juniper Router /Switch equipment -- Pull data using Python/SSH/Telnet from Juniper Router/ Switch equipment * show chassis routing-engine * show chassis hardware * show chassis alarms * show system core-dumps * Etc. -- generate report and summary report from the collected logs and notify if there any failure/error. -- export the reporting to word/PDF/excel -- push notification through email if the report is ready. Skills Required PHP Python Linux S...

We have a customer with a switch juniper in Los Angeles at One wilshire building , we need and engineer to have it on call that can assist us in case of any activity in that cabinet . Tenemos un cliente en los Angeles con 1 gavinete en el One Wilshire Building neceitamos servicio de manos remotas x horas English / Espanol

Looking network engineer to handle and maintain server and have ability to configured and manage Juniper switches

Network Engineer Holds a Bachelor's degree in Computer Science or equivalent. CCNP Routing & Switching Certificate. CCNP Security Certification. MCSE Certificate. PNSE certified. Proficiency in English. Experience of not less than 5 years in the field. Tasks of a network engineer: Setting up networks and the ability to deal with different manufacturers (HP, Huawei, Juniper, cisco). Configure infrastructure systems and settings (infrastructure vmware). Firewall configuration such as: Security rules, NAT, Site-(special firewall protection policies and setup review to-Site VPN). 3 Years - Saudi Arabia

...switching -Excellent knowledge of best practices around management, control, and monitoring of server infrastructure -Experience with firewalls, Internet VPN’s remote implementation, troubleshooting, and problem resolution is desired -Ability to set up and configure server hardware -Familiarity with backup and recovery software and methodologies -Great at organising, prioritising and multitasking -Juniper, Cisco, CWNA or BCNE training -BSc degree in Computer Science or related field...

...of Denver, Colorado), rocks, lighting or items (excel file) REQUIREMENTS ***************** - Zero scaping / xeriscape - Since we're doing a zero scaping, no grass should be in the plan - Budget of the landscaping materials: $3000 - Location: near Denver Colorado. THE PLANTS MUST BE FIT FOR THE WEATHER OF COLORADO CURRENT PLANTS I ALREADY PURCHASED ********************************************* Juniper Blue chip 3 Blizzard Mockorange 3 Cornus sericea 'Baileyi' 1 Russian Sage 3 Maiden Grass "Morning light" 1 Aronia arbutifolia red chokeberry 4 Amelanchier alnifolia 2 Cornus sericea 'Kelseyi' 3 Panchito manzanita 2 Crimson Pygmy Barberry 3 Shenandoah Switchgrass 1 chasmanthium latifolium 1 ATTACHMENTS *************** Zone 1: 7.5' x 28.5�...

I have recently purchased a Juniper SRX345 router/gateway and a Juniper EX2300-24P Switch and i need someone to set them up. It should be a pretty simple process. What i need is as follows Router configured to -Allow internet to any of the devices on the network but block other traffic -Set up static IPs for around 5 or so devices on the network -Set up DHCP on the router so any device can just be connected to the network including access points.. -Port forwarding for our NAS server so whoever is working from home can access it anywhere. -Port 0 will be the uplink to the modem/internet that we have through xfinity -Ports 14 and 15 need to be trunked to connect to the switch. These are SFP ports -If possible Port 1 as a backhaul to the switch incase something happens with the ...

Bitte melde dich an oder Loge dich ein um Details zu sehen.

Looking for some who can help in planning the deployment strategy. Require some conceptual understanding along with a design document. Network Consultant/Network Architect ---Primary responsibilities---- • Management of SD-WAN country wide. • Managing Primary data center and DR site co-location racks. • Ensure quali...BCP connectivity for any unforeseen. • Maintaining 99.99% uptime of network connectivity. • Supervise network team and prepare SOP's. • Network Performance monitoring. • Core Network troubleshooting. • Vendors/service providers dealing for support and deployment. • Managing internal and external audit trail to ensure network compliance. • Managing firewalls i.e. Palo Alto 5020, FortiGate 2201-E, Juniper SRX 3400, ...

The candidate must have demonstrable experience managing Juniper routers and Proxmox virtualization environments. We need the implementation of a Juniper VMX service that is 100% functional for a production environment. The installation must be performed on the Proxmox VE virtualization environment. On our side, we will provide a server with dual Intel E5 v3 CPUs and Proxmox v7 installed. This server has a default RJ45 interface on the motherboard for the Proxmox bridge and an additional network card with 4 x SFP+ to add to the Juniper as PCI-passthrought (IOMMU will be active in Proxmox). We also have the package: (We don't know if we need to buy any license) Thank you.

Should have proper knowledge of Arduino Should be fluent in English. Should have experience in Coding. Session will be of one hour. According to the requirement of parents session will happen in a week . Salary will be hour basis. It depends on the skills of the teacher.

Require for networking configration

I need assistance in setting up a new router and possibly a switch to provide internet access to multiple tenants. I currently have 1gig circuit with a /26 set of IP’s along with multiple strands of SM fiber to each tenant. What’s the best method to allocate 50-100Mbps to each tenant and to separate traffic by IP. I’ve heard Ciena would be the best hardware for this. Let me know how you would build out the network and what hardware I would need to make this happen.

I would like a high resolution version of my logo. As is, I can only go up to about a 2x1” but I would like to be able to size up for stickers, or apparel.

This project is about "ISP CRM" With freeradius, Asterisk and Network Monitoring Capability which Support Vendors [Mikrotik, Huawei, Cisco, Juniper and Star OS]. Required Features and Modules # Admin Control Panel (Web + Android ) * User Management * Plan/Tariff Management * Finance Management >Invoice generation and payment processing >Recurring billing engine >Prepaid billing engine >Data Cap and Top UPs >Voice billing (VoIP CDR auto processing) >Payment gateways and credit card processing (India). >Cash Desk module * Accounting software integration (QuickBooks and Tally) * Referral Management * Sales Management and Onboard Process * Support Management * Task Management * ...

I have a SRX550M with a static public IP for which we need to block SSH connectional unless from an approved list of IP's. It should not block SSH to other public IP's used for Static NAT rules.

4 sites, currently on HP and flat vlan. Implement EX3400 with OSPF and QFX5100 for core. Each site will have EX3400 as core and QFX5100 as datacenter. New IP schema design and OSPF routing between sites.

1. Conducting Technical Interviews for following L2/L3 Profile 2. Recording the Online Interview Session 3. Sharing the Interview feedback in a prescribed format Profiles for which Interviews are to be conducted 1. Windows 2012 R2 or Higher , DHCP /DNS etc concepts , VmWare ESxi / VCenter - L2 / L3 2. Network and Network Security - Cisco and Juniper - L2/L3 Profiles 3. AWS / Azure System Administrator - L2 / L3

I am looking for someone to: (a) Create a website hosting services website in word press that will integrate seamlessly with WHMCS. The website will (excluding WHMCS pages) have less than 10 pages (b) Design a modern logo and incorporate into the website. The name of our business is Juniper Web Hosting Services. The services we will provide are: -Web Hosting -Domain name registration -SSL certificate registration Please refer to this website for guidance . I have highlighted the services we will provide in red boxes in the attached filename: services.

...Internet connectivity including BGP multihoming, ASN administration, looking glass. IP Planning and Address Space Allocation VPNs and tunneling, including IPSec VLANs in a virtualized environment (802.1q) VRF and policy routing NAT and load balancing Network security- IPS, DOS, Firewalls The ideal candidate will have a strong understanding of Cisco equipment, Fortigate, Juniper, Mikrotik, etc. Any experience with Open Source technologies is a plus. Strong troubleshooting skills is a must, including production issues, problem solving, and implementing updates to production hardware and software environments Strong relevant experience would include, DevOps, 24x7x365 operations, IP routing, ethernet switching, IP and Application load balancing, firewalls, ...

Looking for experienced candidate in Networking domain for an MNC to Train the Level1 and Level 2 Engineers. Candidates from Chennai location are preferred. Should have experience in Routing & Switching, Firewall and Security and other Networking Technologies. Minimum 3yrs of experience in Networking domain. Certification in CCNA, CCNP, CCIE, Juniper or PaloAlto are added advantage. This is a permanent role. Salary Upto INR 1Lakh per month based on your current CTC. Expecting Indian candidates as it's a work from office or On-site requirement. Candidates from Chennai location preferred.

I just need to port forward with a Juniper SRX300. I've tried just about everything. I need the right commands. Ill enter the commands.

Hi Kazi N., I noticed your profile and would like to offer you my project. We can discuss any details over chat. I need to write script for CISCO router (ASR920) & Juniper firewall (SRX4600)based on network design.

Need this data form...Maryland  Branch Office – 16701 Melford Blvd, STE 400, Bowie, MD 20715 o Massachusetts  Branch Office – 800 Boylston St, FL 16, Boston, MA 02199 o New Jersey  Branch Office – 3 Third St, STE 210, Bordentown, NJ 08505 o New York  Branch Office – 1250 Broadway, FL 36, New York, NY 10001 o Oregon  Branch Office – 1050 SW 6th Ave, STE 1100, Portland, OR 97204 o Pennsylvania  Branch Office – 100 S Juniper St, FL 3, Philadelphia, PA 19107 o Rhode Island  Branch Office – 2206 Broad St, Cranston, RI 02905 o Texas  Branch Office – 2000 E Lamar Blvd, STE 650, Arlington, TX 76006 o Virginia  Branch Office – 11350 Random Hills Rd, STE 800, Fairfax, VA 22030 o Washington  Branch Office – 1455 NW Leary W...

Se requiere realizar un cgnat en un equipo juniper utilizando interface style nat

I have a working OSPF/Freeradius project (test network setup) working fine with a Juniper core router, Debian freeradius server, and a Mikrotik to split out a management VLAN to a wireless radio. I can ping the Mikrotik from the network and it passes traffic. I can ping the VLAN device from command line on the Mikrotik, but I can't ping the VLAN device across the network. I can upload the Mikrotik config, and also the Juniper so you can see the routing. For now, just look at the network diagram and see if you can tell what I'm trying to make work. I think maybe it has to do with the wrong route entry on either the Mikrotik or Juniper?

Need someone to assist with juniper firewall configuration and other network admin aspects.

Good Experience with different vendor firewall technologies such as Checkpoint, PaloAlto/Panorama, Cisco ASA, Juniper firewalls and troubleshooting network connectivity etc. Tools - TCPDUMP, Solarwinds, Remedy, ServiceNow, Wireshark, SPLUNK, Tufin, Algosec etc. ● Basic routing and switching fundamentals such as BGP/OSPF/MPLS, Switching VLANS, STP, VTP etc ● Firewalls, Virtual Private Network (VPN), VLAN's, URL and Content filtering, Bluecoat Proxy etc. ● Managing and setting up rules/policies, Site to Site VPN, network settings when required ● Software upgrades on Firewalls ● Understanding of Change Management Process using ServiceNow, Remedy etc to do change requests/orders to firewalls in the network Experience in F5, Cisco ACE 4710 Load balancers like LTM/GTM etc ● Network ...

We forward ip addresses to firewall device via routing instance in juniper I send the connection coming back from the firewall to the device where it will be used with the static route again. everything is going well, but I have a separate network device that I tunneled from, the connections from there do not go directly to the device that needs to go with a static route. I do not want connections from this device to go to the firewall //Datacenter Uplink root@qfx-k67# show interfaces ae0 | display set set interfaces ae0 description DGN set interfaces ae0 unit 0 family inet filter input to-fw set interfaces ae0 unit 0 family inet address x.x.x.x/30 //Firewall Filter root@qfx-k67# show firewall family inet filter to-fw | display set set firewall family inet filter to-fw term t1...

Hi Abdelfadeel F., I noticed your profile and would like to offer you my project. Use zabbix for monitor our infra... Advice, configure views and maps. We install snmp community on all machines. we have vmware, Dell Blade and hp blade, network juniper and brocade routers. 2 sites -